Question about 2005 Jeep Grand Cherokee

2 Answers

I have a 2005 Jeep Grand Cherokee Laredo and the shifter cover that slides inside a track came apart / broke in the middle. I have taken the bezels apart and can see where it broke. It doesn't look like it would stay together even if I was able to glue it, because it is a part that always is moving because of shifting gears. Does anyone know a cheap way to replace or from where and what I would need to buy and from where I could buy it, separate from a dealership? JT

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

2005 Jeep Cherokee Laredo- I cut three pieces of 2 inch wide black seat belt material the same length as that cheap piece of rubber. Then glued them together for a thicker belt webbing. Then heated a 3/8 piece of steel rod to melt a hole in the middle of the laminated webbing for the shifter to fit thru. Then slipped it into the slot on the console. Jeep wanted $812.00 for the replacement console.... They do not sell the little cheap piece of rubber to do your repair. Jeep wants you to buy the whole freaking console unit!

Posted on Jul 07, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just recently had the same thing happen in my 2005 Jeep Cherokee, and I am looking for a way to replace it. Any help??

Posted on Apr 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep Cherokee Laredo 2005 broken rear wiper. Still attached but can't fix it just hanging there. Can I fix it


Well, yes and no!
This will be a pretty big job, as you should have to take the rear door all apart to get at the broken parts inside the door.
Often, the broken part may be nothing more than a plastic clip or bushing that has failed.
You may discover the job to take all day.
God bless your efforts.

Dec 29, 2016 | 2005 Jeep Grand Cherokee Laredo

1 Answer

I have a 2000 Jeep grand Cherokee Laredo and the four wheel drive is stuck in part time and the shifter moves freely up and down and won't lock in place


move car to dirt or ice, gravel , off pavement
PT is not for pavement unless covered in ice.
the operators guide told you that.

move to dirt and shift out.
if you have not already damaged it.. that is.

Feb 27, 2015 | 2000 Jeep Grand Cherokee Laredo

1 Answer

I have a 2001 Jeep Grand Cherokee Laredo. The accordion type plastic housing that moves with the gear shift is broke. What is that part called, and how do I replace it?


I assume you mean the pieces that slide along with your automatic transmission's shifter? Those are called blinds, they're part of your shifter bezel.

To replace your bezel, you have to remove your center console. It's only nine screws. Here's a good writeup on the process: http://www.wjjeeps.com/console.htm

Nov 04, 2013 | 2001 Jeep Grand Cherokee

1 Answer

2005 jeep grand cherokee window problem


Try to find one at a salvage yard. Is the rubber track piece supposed to be held on by glue? You might try a good adhesive to make the old track piece stay on.

Apr 10, 2013 | 2005 Jeep Grand Cherokee

1 Answer

Where is the starter relay located on a 2005 Jeep Grand Cherokee Laredo v6


That relay is in the power distribution center near the battery. Inside box cover should be labeled.
Relay is the same as all others except for the one that serves the A/c system so generally you can swap it to test.

May 08, 2011 | 2005 Jeep Grand Cherokee

1 Answer

Do I have to take apart the entire dash or just glove box area 2005 jeep grand cherokee laredo 3.7 liter


What component are you trying to replace or issue your trying to resolve??? The dash assembly is a HUGE undertaking.

Apr 04, 2011 | 2005 Jeep Grand Cherokee

1 Answer

2006 jeep grand cherokee bumper removal


check your metal bumper retainers attached to the front chassis there must be a hidden bolts and nuts thats still on that you havent seen yet remove it and take off the bumper bar( steel bumper)

Apr 07, 2010 | 2006 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee laredo. transmission floor shifter button to engage and disengage hard to push in. now stopped being able to push in at all


Hit the shifter on the top with a good hit to push it down, sometimes the "T" handle will come up.
The handle comes up and out if you have to replace the bezel.

Jun 20, 2009 | 1999 Jeep Grand Cherokee

4 Answers

Rear end (axle)


call jeep and give them last 9 digits of your vin and ask for three things -Differential Type,Gear ratio, and Track lock- They will give you
1) Dana 35 or 44
2) Gear Ratio 3.31 or 3.73
3) Track Lock - yes/no

Jan 11, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

1,470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...