Question about 1991 Jeep Wrangler

1 Answer

Headlights have full brights but no lowbeams. only have marker lights when lowbeams are on. bulbs are good, fuse good, switch good

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem ??? Did you ever figure it out ???
stever@hsmpackaging.com

Posted on Aug 20, 2008

  • Anonymous Dec 15, 2015

    your going to have to clear the faults, thats how i got mine working

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lowbeam headlights wont work, brake lights are out and check engine light is on...changed th dimmer switch, no luck


For the low beam problem, Swap relays 45 & 46 in the underhood fuse panel. Relay 46 is for the Low Beams. If that fixes the light, replace the relay that cam out of position 46.
Since the high mounted brake light is working, that indicates that the brake switch is good. You need to check the bulbs in the rear tail light assembly, if they are good, check fuse #34.

Sep 01, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

I have an 06 pt cruiser and my lowbeams will not work. I have changed bulbs and I have checked all the fuses. I tried to install a H.I.D kit when the lights started flickering then went out. Please help.


this sounds like a bad head light switch, you have replaced the bulbs and all fuses are good then i would say try the headlight switch. there is testing you can do to make sure thats the problem but you will need a test light and also a assume the highbeams work. this is a common problem when the headlights start to flicker its due to a switch most times, if was just one light then i would say to check the wiring to light but as its both then i would start with a new or used headlight switch.good day

Oct 18, 2011 | 2006 Chrysler PT Cruiser

2 Answers

I have a 1997 outback and I have no low beam headlights. any clues?


The dimmer switch on the stalk usually operates a relay in the fuse box.
It could be the dimmer switch, relay, lowbeam fuse, or odd coincidence both lowbeam filaments went out.
Use a test light and work backwards.

Mar 12, 2011 | 1997 Subaru Outback

1 Answer

Marker lights do not work. 1994 nissan pickup SE


I would start by checking all the fuses, then check the headlight switch,test it for power as you did the tail light, then check the wiring coming out of the cab down the frame to the rear of bed check for a short but if all fuses are good then will not be a short, may be a bad switch and the most important is the bulbs, make sure they are good.

Jul 05, 2010 | 1994 Nissan Pickup

1 Answer

Right side head light dose not work on lowbeam, bulb was replaced and still doesn't work.


THERE ARE FUSES THAT PROTECT THE HEADLIGHT CIRCUITS. CHECK TO SEE IF THE FUSES ARE GOOD. THIS SHOULD HELP YOU OUT REAL QUICK. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING AS WELL. PLEASE KEEP ME POSTED. GOOD LUCK

May 29, 2009 | 1995 Ford Explorer

1 Answer

No driving lights?


Hello there - I would suggest checking the fuse for your lights in the fuse box, and check under the hood for a fuse/relay box, and have the relay tested. If the fuses and relays are good, open the hood, and try to check the connection to the headlights and make sure they are securely connected. You also mentioned that when you push the headlights switch forward for brights, and turn on the night time head lights, and neither come on but the daytime lights do, makes me suspect the switch itself may be bad. I would first check the fuses and relays if any. Second, I would replace the bulbs (if replacable). Other than that, my last guess would be an electrical problem in the wiring somewhere. I hope this information helps you fix your lights. Thank you for your time and consideration in my suggestions/answers.

Apr 01, 2009 | 1996 Mazda 626

1 Answer

2003 Seville STS low beam headlights don't work


ya its is prolly the bulbs, open your hood. look behind your headlamps, some have covers for the low beam and high beam. if there are covers turn on your high beams so you will know which bulb is your lowbeam. if you can unplug them. after cover is removed and you can acces the bulbs. they either twist out, lefty lossey. or they have little metal retainers that you have to move a certian way before you can swing the retainer out. its like a door you just have to unhook the proper side of retainer and the other side will be hinged. use a flash light and look at it close. good luck

Jan 29, 2009 | 2003 Cadillac Seville

2 Answers

No headlights


test the headlight switch, that is most common cause on escorts of no headlights.

Dec 16, 2008 | 1997 Ford Escort

1 Answer

96Grand Cherokee ,headlights


Why did you replace the switch without checking the headlight bulbs first? Suggest you check the headlight bulbs, if they are good, then check the connectors, if they are good, then check the fuse box. Sometimes there is a fuse for the healights right and left. If all of that is good check your ground connections. If all of that is good, then is to basics........check continuity on the harness, ensure there is current through the connector to the lights contact.

If all of athe above is good, then I always advise to check the fuse links. You might have burned one out. They are usually located near the battery.

Nov 05, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1991 Jeep Wrangler Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...