Question about 1995 Nissan Pickup

Open Question

1988 Nissan Truck 4 cyl 2WD - Extremely high idle speed (4k rpm plus) in cold weather. After engine warms up idle drops to about 2500 rpm. The problem isn't nearly as bad in hot weather - will idle down to around 1500 rpm. An air-conditioning mechanic said it needs a new cold idle solenoid. Parts people I've talked to either don't know what that is or say it's no longer available. Anyone know how to fix this idle problem?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
pal03246
  • 726 Answers

SOURCE: idle too high +goes higher when put in gear (manual transmision

IAC valve problem. Nissan has a updated harness (with one way diode inside of the harness) to prevent backfeeding for the IAC valve and a new IAC valve also gets installed. That's where I would look. IAC valve or "idle air control" valve.

Posted on Sep 21, 2008

Ad
  • 120 Answers

SOURCE: 2002 Nissan Pathfinder air conditioner/heater problem!

replace heater control switches

Posted on Feb 19, 2009

  • 1 Answer

SOURCE: 2000 Nissan xterra

I had the same problem as well...don't know the name of the part, but it was in the glove box and it was really cheap...works great now...i did it myself when my husband was at work...so you know it is easy to change!!! Good luck...

Posted on Apr 12, 2009

  • 6 Answers

SOURCE: High Idle

I have a 2001 Nissan Altima and mine did the same thing. We replaced the intake gasket. It costs around $5.50, but it requires several different kinds of tools. We spent over $100 in special sockets, etc. But once you replace that gasket, it will idle better.

Posted on May 14, 2009

  • 1 Answer

SOURCE: High idle speed- Nissan N16 Pulsar/ Almera

Battery not charging well when airconditioner on ( also engine speed not increase when air conditioner on )

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 Kia Sedona what is the RPM supposed to idle aton cold start an in warm weather


Idle speed depends on a number of factors; for instance it may idle faster when the air conditioner is on. Instead of a fixed idle speed, as in the old cars, the engine computer sets the speed to whatever is needed to run any accessories and maintain smooth operation, but generally not more than that. That's under normal circumstances. There are several failure modes that cause erratic idle speed; usually the engine will also run roughly.

Jul 09, 2017 | Kia Cars & Trucks

1 Answer

What is the ignition timing for 2002 nissan hardbody 2000i 16v


Here are the 3 engines listed for this year. IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 2.4L SFI 4cyl

The Ignition Timing

18-22 DegreesBefore top dead center - When throttle positionsensor disconnected and using suitably programmedscan tool.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (750-850 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (700-800 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI SC 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chockdrive wheels, curb idle speed (700-800 RPM)transmission in neutral.

Jun 05, 2015 | Nissan Hardbody Cars & Trucks

1 Answer

What type if transmission fluid is used for 1988 Toyota truck 5 speed fuel injected


80w90 but have heard people putting 15w40 in it in real cold weather because the gear oil gets real thick in extremely cold temps.

Mar 28, 2014 | 1988 Toyota Pickup

1 Answer

Ignition timing



1991 Nissan/Datsun Truck D21 Truck 2WD 3.0L FI 6cyl

The Ignition Timing
15 Degrees Before top dead center*Warm idle speed 750 RPM*Transmission in neutral (Parking brake engaged)*All accessories off.

1991 Nissan/Datsun Truck D21 Truck 2WD 2.4L FI 4cyl

The Ignition Timing
10 Degrees Before top dead center*Warm idle speed 800 RPM*Transmission in neutral (Parking brake engaged)*All accessories off.

Mar 24, 2014 | 1991 Nissan Pickup

1 Answer

Idle problem integra


check the MAP sensor (manifold absolute pressure). The ECM (car computer) uses that to keep idle at minimum 750 RPM. It's normal for it to run high when cold. These small 4 banger motors typically run hot, and they won't run right IF they're NOT running hot, ergo the idle is usually high when it is cold so as to cause it to warm up quicker. If the RPM's drop below 750, suspect the MAP sensor, &/or ECM.

Apr 18, 2013 | 1995 Acura Integra Coupe

2 Answers

2002 Nissan Altima Cold air blows at idle but is warm at higher engine RPM


Heater core may be clogged. Try flushing it to see if water flows through freely. Also check the heater water control valve for restrictions.

Dec 15, 2017 | 2002 Nissan Altima

1 Answer

What should my 2010 camry rpms be at in park starting the car


Hi Joseph, When starting the vehicle from cold in cold weather, the RPM can be as high as 1300 and in temperate climates about 1100 RPM. The RPM will drop to normal as the coolant is warmed. Normal idle speed is between 750 for Auto and 650 to 700 for manual transmission. Regards John

Jan 27, 2013 | 2010 Toyota Camry LE

1 Answer

88 Isuzu truck (4 cyl) has terrible idle/black exhaust


did you check for vacuum leaks probably a vacuum hose thats been knocked off or eroded and needs to be replaced.

Mar 06, 2009 | 1988 Isuzu Pickup 2WD

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...