Question about Nissan Pulsar

1 Answer

Can use a window one time only, then none work. Turn car off for a while, then will work once or twice, then stop. Seems like no power going to control swith. Cleaned the connector contacts, seems to be okay for a while then problem returns.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 383 Answers

There is a circuit breaker should be in one the fuse box that could be the problem but i doubt it
i assume when you run the windows they run slowly
what is probably happening is window motor are getting weak and drawing more amps than they should which is popping the circuit breaker
u can try and replace the breaker but more than likely u need to replace at least one of the window motors (replace the one that runs the slowest that one is probably your problem

Posted on Nov 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy cavalier hazard flashers wOrk turnsignals either blink once or twice or not at all replaced switch assembly nO difference both right and left same problem headlight and high beam switches work...


I believe in your car there are two flasher relays. one for the hazard and one for the turn. the turn is mounted on the steering column, up by the fire wall. Newer models have them both in one relay. and one side can go bad

Aug 17, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Hi I have a 2001 vw beetle, today the indicators started to play up, sometimes they will work for one or two clicks then not at all, other times I cant even get them to go on. II hear the clicking and can...


my daughter has beetle and is having the same problem ( she has beetle 2001 and indicators will work for lttle while then stop or do 2 clicks and stop have checked fuses and they seem to be OK) so was wondering if you fix the problem and if so could you please tell me what it was my email address is ahancock@iprimus.com.au

Oct 20, 2010 | 2001 Volkswagen Beetle

1 Answer

2000 explorer power window problems


There is a switch on some cars to lock out the windows to keep your kids from getting caught in them. This switch is a different shape than the others and is on the door or center console.
If you have a keyless entry system with numbers to push to unlock your car, sometimes the door switch forgets the numbers and needs to be reset. If you have a fancier car, the locks may have automatically locked as the car moved and once the door switch forgot the code it may have interferred with normal operation.

Apr 24, 2009 | 1996 Ford Taurus

2 Answers

2001 Sebring won't start


I had same problem when I had a plain copy of the key made.
There's a proximity chip in the factory key or something, but the plain copy would not work. Engine would crank, then immediately stop. I didn't need the extra key bad enough to spend $80+ at the dealership.

Apr 13, 2009 | 2001 Chrysler Sebring

3 Answers

All power windows stopped working


look for a 30 amp circut breaker in location # 62 in the power distribution box in the engine compartment

Apr 06, 2009 | 2002 Ford Explorer

1 Answer

2002 toyota corolla power windows stop working


Probably a resetting circuit breaker in the system. Some are reset when they cool off, others when keyed off. Must be something drawing too much current, or circuit breaker getting weak. Usual causes of drawing too much current in your case would be power window motors. With that said, there are some things you can try to lessen the load on the circuit such as spraying silicone down sides where felt is for easier window movement. Those areas get dried out and tend to grip glass as it's going up & down causing extra load on motor. I've also had to resort to removing door panels & spraying grease on tracks & guides inside door, to help. try silicone down sides first and see if it helps. Also make note if one window seems to cause it more than another, that gives you a good one to start on.

Mar 14, 2009 | 2002 Toyota Corolla

1 Answer

97 dodge ram window and door lock problems


Hi my names is Allen!

Chrysler vehicles have a lot of problems with the regulator/motor assemblies, but first lets make sure its not the switch. See if you can get it to stop working again, once it stops go to the other switch and see if it works from that switch. If it does not work from either switch, then the most likely cause is the regulator/motor assembly.

Before running out and buying the part I have a question, when the window quits working, does all the other windows work ok? If they do, go buy the part. If they all the windows are doing the same thing you may have a switch or wiring problem.

Now, on your door locks, does none of the locks work or just one lock?

For further asistance you may reach me at FixYa!

Dec 26, 2008 | 1997 Dodge Ram

1 Answer

1996 Acura 3.2 TL windshield wiper problem


they have what one guy, I know called a small "transmision" that engages both wipers and the speed. On one car the winshield wipers transmission connections were loose. A small bolt came off.
Check all the workings by running the wipers .
Try to get to the wiper motor assembly and take a look at it. You may have to remove some screws.

Dec 23, 2008 | 2000 Acura TL

3 Answers

My car starts and then dies


sounds like a security issue they installed a factory security system which will prevent the vehicle from running unless its reset go to passenger door lock turn key twice it worked for me after chasing other problems for a few hours

Dec 03, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...