Question about 2001 Hyundai XG300

Open Question

I ged problem hyundia grandeur tcs and abs on and of

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my traction control


Is your trac light lit ? If so it has a problem an till it is fixed , you can't reset it. Need to have it checked for DTC'S - diagnostic trouble codes .
If the ABS control module detects a malfunction, it will disable TCS and will command the BCM to turn the TRAC LED Off. The driver can also disable TCS, if desired, by depressing the TRAC switch. When the driver depresses the TRAC switch, the ABS control module will disable TCS and will command the BCM to turn the TRAC LED Off.
DTC C0276 TCM Traction Control Not Allowed
DTC C0275 or C0276
The TCM sends a serial data message to the electronic brake control module (EBCM) indicating that torque reduction is temporarily not allowed.
DTC C0550
DTC C0896
The electronic brake control module (EBCM) is required to operate within a specified range of voltage to function properly. During antilock brake system (ABS) and traction control system (TCS) operation, there are current requirements that will cause the voltage to drop. Because of this, voltage is monitored out of ABS/TCS control to indicate a good charging system condition, and also during ABS/TCS control when voltage may drop significantly. The EBCM also monitors for high voltage conditions which could damage the EBCM.

Oct 16, 2015 | 2004 Saturn VUE

1 Answer

ABS light come on when i am towing


the tcs system is detecting the weight and sway of the trailer because the load on the hitch is too much- that's the simple answer.

The ABS and TCS work together - the ABS system is what detects wheel spin and tell the TCS which diverts and/or control power.

Oct 08, 2014 | 2008 Mazda MAZDA6

1 Answer

Light abs traction control stays 1998 buick park avenue


PRE-DIAGNOSTIC INSPECTIONBefore diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing. Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block. Check brake fluid level in master cylinder reservoir. Check brake fluid level in Pressure Modulator Valve (PMV) assembly reservoir. Ensure parking brake is fully released. Ensure parking brake switch is functioning properly. Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTSThe EBCM/EBTCM has self-diagnostic capability, which can detect system failures. Fault codes stored by EBCM/EBTCM can be displayed using Tech 1 scan tester. There are no provisions for flash code diagnostics.Begin ABS/TCS diagnosis with PRE-DIAGNOSTIC INSPECTION procedure. If failures are found during pre-diagnostic inspection, perform necessary repairs, and proceed with ABS/TCS FUNCTIONAL CHECK. See Fig. 5 .If no failures are found during pre-diagnostic inspection, go to ABS/TCS FUNCTIONAL CHECK. See Fig. 5 . The ABS/TCS FUNCTIONAL CHECK will either indicate ABS/TCS is functioning properly or direct technician to various diagnostic procedures such as diagnostic charts, symptom diagnosis or BRAKE warning light diagnosis.CHART D - TRACTION OFF WARNING LIGHT ON CONTINUOUSLY & NO DTC SET (BUICK WITH UH8 OR U2A INSTRUMENT CLUSTER)Circuit DescriptionWhen ignition switch is first turned to RUN position, EBTCM goes through a self-test, which lasts 2-4 seconds. During self-test, EBTCM commands TRACTION OFF indicator warning light on. Powertrain Control Module (PCM) can also command EBTCM to set a Code 75 which will illuminate TRACTION OFF indicator.Traction control switch is located either on instrument panel center trim plate or driver's front door trim panel. Switch allows driver to select traction control mode (on/off). When traction control system is turned off, TRACTION OFF warning light comes on.EBTCM monitors transaxle temperature through

Jul 12, 2014 | 1998 Buick Park Avenue

1 Answer

How to shut off abs light


TCS light will be on to notify you when it is on/off..ABS light should not stay on while driving...if this occurs, there is a problem with your ABS system

Apr 05, 2014 | 2006 Kia Magentis 2.5

1 Answer

Abs & TCS-off dash lights both stay on. Pushing the TCS off switch does not help. "seem" to stop fine. Emergency brake seems to be fully off, not dragging. My wife encountered a patch of ice...


Hello: If there is a problem in the ABS it will bring on the tcs light as well. To determine what is causing the problem you need to have the ABS checked with a scanner to get the code. Then trouble shoot the components that the code leads you to. Normal braking is available with the light on but TCS is not as it relies on ABS for functioning the TCS.

Mar 04, 2011 | 2008 Saturn VUE

1 Answer

The TCS<ABS> warning light on my Hyundai


If you are driving in slick conditions on snow and ice or on wet pavement, this could be NORMAL OPERATION. The lights are coming on to let you know that the Traction Control System (TCS) and the Antilock Brake System (ABS) is actively correcting a wheel slip condition.

If this is happening on dry pavement, and you are not driving like a maniac, (making the wheels slip and slide) then there is possibly a problem with one of your wheel speed sensors that is making your TCS and ABS computers "think" that there is a wheel slipping. You will have to scan your computer system and watch the wheel speed sensor data to find out which one is malfunctioning.

Feb 28, 2011 | 2001 Hyundai XG300

1 Answer

Well all the Lights of ABS TCS SLIP started to turn on and i don't why can you tell how can I fix this problem and also tell that TCS was turn off


CANT FIX AT HOME,DEALERSHIP HAS TO FIX.ABS AND TCS SYSTEM HAS TO BE CHECKED WITH SPECIAL DIAGNOSTIC EQUIPMENT.

Sep 20, 2010 | 2006 Nissan Maxima

1 Answer

1999 Oldsmobile silhouette brake light and tcs


check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system

Jun 28, 2010 | 1999 Oldsmobile Silhouette

2 Answers

What is the TCS


TCS is used to control wheel spin by utilizing the ABS system. When a wheel is detected to be spinning more than it should, the TCS triggers the abs system to activate to slow down the spinning wheel. The TCS should only trigger at speeds under 20mph

Oct 19, 2009 | 1999 Acura TL

1 Answer

ABS light comes on at 80 Miles an hour, Hyundia


more then likely its a wheel speed sensor setting off your abs light

Mar 10, 2009 | 2003 Hyundai Accent

Not finding what you are looking for?
2001 Hyundai XG300 Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...