Question about Ford Explorer

1 Answer

92 FORD EXPLORER I HAVE CHANGED THE PLUGS AND WIRES AND IT STILL DOES NOT WANT TO CRANK AND WHEN DOES IT BACKFIRES

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,403 Answers

Are you sure the plug wires are in the right place?you may have missed putting them back on right. or is this the reason you replaced them in the 1st place? is this the reason for replacement wires and plugs?i'm not sure where to start, unless i know it was a tune up with no problems other than a miss or just not running right.as always i replace 1 plug and 1 wire at a time. you may have mixed the wires up or the wires on the coil. start from scratch with a timing order and placement of the wires. hope this helps and if you need the timing and placement of cylinders i will be happy to help!! thank you for choosing fixya.com

Posted on Nov 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1995 ford explorer doesn't start, crank & cam sensors replaced


Does you fuel pump delivers fuel. Is it there a spark.

Dec 29, 2009 | 1995 Ford Explorer

1 Answer

2001 ford explore sport cranks but will not start.


TUNEUP? WHAT WAS CHANGED?NEED TO CHANGE WIRES,PLUGS CAP&ROTOR ELECTRIC COIL, CHANGE THE FUEL FILTER,IF STILL THE SAME?TAKE OUT THE FUEL FILTER IF WET THEN OK, BUT IF DRY THEN ,FUEL NOT GETTING TO THE ENGINE,CK WIRES TO AND FROM THE PUMP,STILL THE SAME THEN NEW PUMP

Oct 30, 2009 | 2001 Ford Explorer Sport

1 Answer

My 2002 Ford Explorer wont crank!


I'm assuming the coilpack got wet!! Check if there is any power to the coil before changing. If thats fine, replace the coil. If there is no power, check your electrical circuit for the coil. Hopefully this helps

Jul 23, 2009 | 2005 Ford Explorer

1 Answer

Change spark plugs and now car wont start.....1994 ford tarus


Do you have the "firing order" correct? In other words, is each spark plug wire going to the same cylinder it was on before you changed the plugs? If you have done nothing else but changed the plugs then this is the most likely problem.
If when you try to start the car it backfires through the exhaust or backfires through the intake. Then this " IS" the problem. Good luck.

May 23, 2009 | 1994 Ford Taurus

2 Answers

I just changed my spark plugs , wires , and coil on my 2000 ford explorer and it will turn over but it wont crank. what do i need to do?


Have you checked to see if you have spark to the plugs? I have found that on some Explorers , the primary voltage to the coil was not there. I know it sounds complicated, but it's not. You have a 4 wire connector at the coil pack. One of the wires has battery voltage going to it. When this wire is checked with a voltmeter when the key is on ,it will show 12 volts. When this wire is checked while cranking the voltage may drop to 9 volts or less. This is "NO GOOD'. If you find this, rewire a jumper from Batt to this wire. Should result in a start and run. Good luck Moe

Apr 24, 2009 | 2000 Ford Explorer

1 Answer

Runs really ruff it ant the plugs and wires


some of the parts and what not (ecu ect) my not work on the 92 engine. Check With dealer or on line to see what years are acctually interchangeable. It could be somthing simple like needing to upgrde a sensor or reprograming the computer. Hope this helps

Apr 15, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...