Question about 1992 Plymouth Voyager
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here's a link to both size motor diagrams...
If this helps, please post feedback. Thanks
Posted on Sep 21, 2009
Here's a link to the diagram you need...
Good luck and please rate this solution. Thanks.
Posted on Oct 17, 2009
Testimonial: "Looks good."
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
Posted on Feb 08, 2010
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..
Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.
I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..
Posted on Jun 02, 2010
Tips for a great answer:
Nov 11, 2013 | Cars & Trucks
Aug 19, 2012 | Cars & Trucks
Oct 24, 2011 | 1992 Plymouth Voyager
May 15, 2010 | 1993 Plymouth Voyager
Apr 17, 2010 | 1992 Plymouth Acclaim
Feb 08, 2010 | 1997 Plymouth Voyager
Jan 03, 2010 | 1990 Plymouth Grand Voyager
Oct 16, 2009 | 1997 Plymouth Voyager
Sep 20, 2009 | 1992 Plymouth Voyager
May 03, 2009 | 1995 Plymouth Grand Voyager
575 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: