Question about 2001 Suzuki Grand Vitara

1 Answer

Need to know if have to take intake off v6 2.5 suzuki to replace valve cover gaskets

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Yes and no, you can take the nuts loose, dont drop them! they will fall into the intake later. take the bolts loose, and you can lift the intake up, its got metal reusable gaskets. but just lift it up and with a swivel 10mm you can take the nuts off. seal under the valve cover nuts is easy to drop too, if you do you will have to pull the intake to make sure it wont run through the motor, it has a metal washer in it. but you can sneak them out without too much hassle

Posted on Nov 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve cover leaks


Try replacing the valve cover gasket. If the valve cover gasket still leaks oil after replacement try adding standard 1/4 lock washers to the top of the valve cover bolts. I have a 2005 Suzuki Reno and had to replace the valve cover gasket several times. Adding the washers tightened the seal of the gasket and prevented any leaking,

Jan 13, 2014 | 2006 BMW 750Li

Tip

How to remove/replace the Valve Cover Gaskets on a New Beetle car?


Replace the valve cover gasket if the valve cover gaskets are leaking or if they're worn. The procedure is as follows:--
1) First of all let the motor cool down if the car was recently driven. Then remove the air intake boot.The air intake boot ios attached to the engine's throttle body.
2) Carefully disconnect the throttle cable , hoses and electrical connectors located on the upper intake manifold.
3) Then disconnect the hard pipe that is connected to the EGR (exhaust gas recirculation) valve.
4) The EGR valve is located beneath the upper intake manifold.
5) Then remove the bolts from both the upper intake manifold and the manifold support bracket.
6) Now the upper intake main fold and lower intake manifold both have got loose as you removed the nut.
7) After that remove the upper intake manifold from the lower intake manifold. Carefully place clean rags over the intake runners to prevent anything from falling into the intake system.
8) Then you will have to disconnect the crank case breather valve on the valve cover.
9) Then remove the bolts from the valve cover and remove the reinforcing straps.
10) Then remove the camshaft belt cover and the dust shield from the back of the camshaft sprocket.
11) Now carefully remove the valve cover. Properly clean the old gasket material with gasket remover.
12) You can install a new gasket in the reverse procedure of removal.


This will help. good luck.

on Mar 09, 2010 | Volkswagen Beetle Cars & Trucks

1 Answer

Approx. how long does it take to replace the valve cover gasket on a 2002 chevy monte carlo?


if it is a 3.8liter engine generally about and hour there is 4 10mm bolts in the front valve cover and the rear you may have it remove the spark plug wires and coilpack/ignition controll module bracket.

Aug 28, 2012 | Cars & Trucks

1 Answer

How do you change a valve cover gasket 2004 suzuki verona


The intake manifold has to come off too......im about to do mine i will let you know when im done

Aug 23, 2011 | 2004 Suzuki Verona

2 Answers

I have a 1995 Suzuki sidekick 16 valve 1.6 engine, that I am going to replace head gasket. I have removed everything except the timing belt, distributor, and head. My question is why is it that in the...


try to check, is it enough space to get the head bolt out without removing the cam? if ok, just follow your opinion. haynes maybe just told you to minimize the risk to broke the distributor.

Nov 19, 2010 | 1995 Suzuki Sidekick

2 Answers

Can i just replace the head gaskets or do i need to replace alll gaskets


when u replace the head gaskets u must also replace any parts gasket that u remove (valve covers, intake manifold etc.) to get the heads off, they sell what is called a "Valve Grind" gasket set that is what u need, it will have all the gaskets in it u need..

May 27, 2010 | 1991 Buick Century

1 Answer

We need to know how to change a valve cover gasket on a 2004 suzuki verona 2.5L ENGINE


There are probably 8 - 12 bolts/nuts that attach the valve cover to the cylinder head. Remove the bolts, clean the mating surface, install new gasket, and reattach the valve cover with the bolts.
You may need to remove the following spark plug wires vacuum lines air cleaner assembly oil filler cap

Jan 06, 2010 | 2004 Suzuki Verona

1 Answer

What parts do I need to replace my spark plugs?


Generally, the valve cover gasket, PCV valve, vacuum lines, exhaust manifold gaskets, and injector seals. These are all things that, universally, should be inspected or replaced at large intervals (60,000 - 70,000) as a matter of preventative maintenance.

Nov 19, 2009 | 2000 Lexus RX 300

1 Answer

How do you change a water pump out of a Suzuki Vitara 1999


If you have a 2.5 V-6, you need to pull off the front timing cover, to gain access to the waterpump. If you do the work, you need to move the intake manifold up, to move the valve covers up, so you don't tear the valve cover gaskets. It is a 8 hour job by yourself. There are shortcuts, but it is not easy. Don Suzuki man

Oct 03, 2009 | 1999 Suzuki Vitara

1 Answer

Valve covers gasket leak oil


To replace the valve cover gaskets on a Sienna: The front one is easy. The difficult one is the other side, closest to the firewall. You will need to purchase a new intake plenum gasket, when you buy the new valve cover gaskets, because you MUST remove the intake plenum to remove the rear valve cover. You can NOT get the back side valve cover off of the engine without removing the plenum. Trust me.
Hope this helps, and thanks for choosing FixYa.

Nov 04, 2008 | 2001 Toyota Sienna

Not finding what you are looking for?
2001 Suzuki Grand Vitara Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...