Question about 2004 Chevrolet Venture Passanger

1 Answer

My wiper motor (front) stalls leaving my wipers in an upright position. what can or should I do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 302 Answers

Try running a ground wire from the case of the wiper motor to the battery negative and see if the wipers work.
they had a problem with wiper motor losing ground.

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiper timing switch


Susan, inside the wiper motor is a parking peg which controls the position of wiper blades when off, It is possible the peg is damaged or broken. The wiper motor would have to be replaced in this case. You can find a used one at the auto wreckers, just make sure the plug is the same as yours, as they may be different from one year to another.Have a good Tech. check wipers, diagnose and estimate repair.
Check the attached links,instruction and guides, 1 st link gives procedure to change wiper motor. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://boards.straightdope.com/sdmb/showthread.php?t=240691
Wipers will not park Body and Interior Crownvic net
2000 Ford Crown Victoria Windshield Wiper Issues Electrical

Aug 21, 2016 | 1999 Ford Crown Victoria

1 Answer

2007 Pontiac g6 wipers stay in upright position


Hey Derek , here is how the wipers park position is suppose to work !
Windshield wiper motor park operation is controlled by the body control module (BCM) using an input from the park switch within the wiper motor assembly. The BCM monitors the windshield wiper motor park switch circuit to determine if the windshield wiper blades are at the bottom of the glass. The circuit will be pulled to ground by the wiper motor park switch while the windshield wiper motor is operating. When the wiper switch is turned to the OFF position while the wiper motor is somewhere in mid-cycle, the BCM will continue to operate the motor until the wipers reach the park position. If the ignition is turned OFF while the wipers are in mid-cycle, the wipers will stop immediately where they are. The BCM will park the wipers the next time the ignition is turned ON.
The wipers will not park when they are commanded ON and OFF with a scan tool. The BCM will park the wipers the next time the wiper switch is turned ON and OFF.
The BCM provides stall protection for the wiper motor by monitoring the park switch. If the park switch does not transition for 3 seconds while the wipers are operating, the BCM will assume that the wiper motor is stalled, and will de-energize the wiper relay until the wiper switch is cycled OFF and ON again.
Check for a voltage signal on the yellow wire at the wiper motor assembly , this is signal to the BCM ! If there is no signal you need to replace the windshield wiper motor assembly ? If there is a signal need to have Tech 2 scan tool hooked up to see if The BCM is the problem ! Relay #39 an #40 are the high an low wiper relays in the under hood fuse block ! Do you have a volt meter ,do you know how to do electrical testing ?

Sep 21, 2015 | Pontiac Cars & Trucks

2 Answers

Front wipers won't work correctly when shut off. what is the cause of this?


The wiper park switch in the wiper motor is defective is my guess.

Jun 12, 2014 | 2001 Pontiac Montana

2 Answers

When turned off, my 1998 Crown Victoria wipers park in the full upright position. How do I fix this?


replace the wiper motor, the park position is broken, need to replace complete wiper motor.

Jan 21, 2010 | 1998 Ford Crown Victoria

1 Answer

When i tuurn the wipers off they remain in the upright position


your wiper delay board has gone bad, it is on the front of the wiper motor, 3 screws and 1 6 wire elect. connector. ask for a wiper delay board at your local parts store

Dec 01, 2009 | 1999 Buick Century

1 Answer

Removing/replacing wiper motor in '93 Ford Ranger


You don't have to put the wipers in an upright position You can take the arms completely off. It's very easy to do, when you are looking at the base of the wiper arm, on the side closest to the windshield, at the base, there is a spring-loaded tab. Lift the arm on its hinge to where the arm is now pointing away from the windshield, pull the tab and the wiper arm will slide right off. Now you can access the linkage joints easily. Hope that helps!

Nov 09, 2009 | 1993 Ford Ranger SuperCab

2 Answers

1994 pontiac transport windshield wipers periodically stall in the upright position


Inthe wiper motor mechanism there is a mettle tab that wears with the constant back & forth motion of the wipers. It needs to be bent back up to allow the wipers to stop in the down position. Remove wiper arms then the plastic shroud,then the armeture parts, then the mechanism to reveal the bent tab.

Sep 14, 2009 | 1994 Pontiac Trans Sport

1 Answer

Wiper motor running, wipers stalled in vertical position during s


no you need a locking bolt to lock the wipers to the motor

Sep 01, 2009 | 1997 Chevrolet Cavalier

1 Answer

2005 impala windshield wiper


the wirpers are connected to a shaft. the shaft is connected to a motor. The shaft must have turned and wipers were stuck and didn't move. So you will need to pull of each wiper arm and reposition with wipers turned off.

Apr 03, 2009 | 2005 Chevrolet Impala

2 Answers

Windshield wipers stuck upright when off


It is the fuse or the pulse board. Most likly the pulse board though

Jan 30, 2009 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
2004 Chevrolet Venture Passanger Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...