Question about 1995 Chevrolet K2500

1 Answer

My stop hazard fuse keeps blowing on my 95 chevrolet k2500 Cheyenne. I do not have cruise control. i have disconnected the break relay and my turn/hazard switch. It still blows, yet when i unplug my break fuse it does not blow. WHY????

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the AMPS for all your fuses sometime a low amps fuse in the wrong slot can blow otherones. also sometime you can increase the fuse that keep blowing. try that first if that do not work you might need to run and electrican test on your fuse box to check if you have a short. also check your fuseable link on the fuse panel under the hood.

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2006 chevrolet silverado 1500, where is the back brake light fuse?


Stop Lamps
The STOP LP 25-amp fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15-amp fuse and the center high mounted stop lamp (CHMSL) 10-amp fuse in the instrument panel (I/P) fuse block, and to the turn signal/hazard module. The turn signal/hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10-amp fuse is to the CHMSL and the trailer jumper harness. The voltage from the STOP 15-amp fuse is to the stop lamps, throttle actuator control (TAC) module, and the cruise control.

Apr 08, 2017 | Chevrolet Cars & Trucks

1 Answer

Dash lights and tail lights fuse keeps blowing


Check for any short circuit in cruise control, light control and switch. The positive wire is shorted to ground.

May 11, 2015 | 1994 Honda Civic

1 Answer

Keep blowing cruise control fuse on 2009 silverado Z71


You'll probably need a shop manual to find out what is protected by that fuse. Could be a component or a problem in the wiring harness.

Feb 19, 2015 | 2009 Chevrolet Silverado 1500

1 Answer

K2500 Suburban with. 6.5 Diesel and the instrument fuse keeps blowing when I turn the key to the on position. When I disconnected the glow plug relay the fuse did not blow. Also while running with th


did u replace the relay just a curious question, sometimes they have rust and water in the inside of the relay but my guess would be that you have a bare wire rubbing somewhere, causing the fuse to blow, anything significant has happened before that issue?

Nov 25, 2013 | 1997 Chevrolet Suburban

1 Answer

My break light fuse keeps blowing in my 97 suburban any ideas why


Assuming it's a K1500, 15A STOP/HAZ fuse 1 in the instrument panel fuse block is the source of power. If the stop lamp switch checks OK, and the center high mount stop lamp is OK, the cruise control system gets input at this point and may be defective. Fuse 1 also feeds power through the turn/hazard switch to the stop filaments of the tail/stop/turn lamps and these presumably are OK

Sep 22, 2012 | 1997 Chevrolet Suburban

1 Answer

I have a 2002 Ford F150. Fuse 15 (5 Amp) keeps blowing.


replace nuetral safty switch for gear shifter and check window relays

Feb 12, 2010 | 2002 Ford F150 Regular Cab

1 Answer

My 2001 Cherokee Sport has lost hazards and cruise control.


You are looking more so for relays, not fuses, check the hand book again under relays.

Nov 27, 2009 | 2001 Jeep Cherokee

4 Answers

1988 Ford Crown Vic Lost Cruise Control


Although I don't think the cruise is an issue for safety, reach in under hood , or in grille area and find your horn(s) and just pull the connector off them temporarily, so they won't blow & put fuse back in and see if cruise starts to work again. It's not unusual for circuits to be labeled wrong or not at all in fuse panels. Then you can turn your attention to horn problem.

Jun 27, 2009 | 1988 Ford Crown Victoria

1 Answer

2000 Chevy Venture cruise control and lower tail lights not worki


Hi you have a multifunction switch , which is your turn signal arm and windshield wiper and also hazard and break lights , it is time to replace it.

Jun 08, 2009 | 1997 Chevrolet Venture

Not finding what you are looking for?
1995 Chevrolet K2500 Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...