Question about 1993 Ford F350

1 Answer

How to install distributor wire the order I misted the order

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Depending on what engine you have, hear are the firing orders:
Small block 302 or big block 460: 1-5-4-2-6-3-7-8
Small block 351: 1-3-7-2-6-5-4-8
Looking at the engine from the front, cylinder number 1 is at the front on your left. That side is numbered 1-2-3-4. Number 5 cylinder is at the front on your right and the numbering is 5-6-7-8. The distributor spins counterclockwise. Number 1 is usually marked on the cap. If not, no.1 on the cap is about 1 o'clock as you're looking at it from the front. Good luck!

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know where the plug wires go.from spark plug to distibuter cap on a 1986 4.1 coupe deville(cad.)


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: GM (Cadillac) 250 (4.1L) V8 GM (Cadillac) 273 (4.5L) V8 Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: counterclockwise 85872009.gif Fig. 2: GM (Oldsmobile) 307 (5.0L) V8 GM (Oldsmobile) 350 (5.7L) V8 w/EFI Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: counterclockwise 85872009.gif Fig. 3: GM (Buick) 252 (4.1L) V6 Engine firing order: 1-6-5-4-3-2 Distributor rotation: clockwise 85872010.gif Fig. 4: GM (Cadillac) 368, 425, 472, 500 V8 Engine firing order: 1-5-6-3-4-2-7-8 Distributor rotation: clockwise 85872011.gif Fig. 5: GM (Cadillac) 429 V8 Engine firing order: 1-8-7-2-6-5-4-3 Distributor rotation: clockwise 85872012.gif prev.gif next.gif

Feb 08, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

Firing order diagram for 91 camaro rs v6


See Figures 1, 2, 3 and 4
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes, to reflect how your engine is wired.


0900c15280098d2b.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: 2.5L Engine - Engine firing order: 1-3-4-2- Distributor Rotation: Clockwise


0900c15280098d2c.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: 2.8L Engine - Engine firing order: 1-2-3-4-5- Distributor Rotation: Clockwise


0900c15280098d2d.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: 3.1L Engine - Engine firing order: 1-2-3-4-5-6- Distributor Rotation: Clockwise


0900c15280098d2e.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: 5.0L and 5.7L (VIN 8) Engines - Engine firing order: 1-8-4-3-6-5-7-2- Distributor Rotation: Clockwise
icn_arrow.gifBack to Top

Nov 11, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Firing order mazda mpv 93


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 2.2L Engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise 89642gf1.gif
Fig. 2: 2.6L Engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise 89642gf2.gif
Fig. 3: 3.0L Engine Engine Firing Order: 1-2-3-4-5-6 Distributor Rotation: Clockwise 89642gf3.gif
Fig. 4: 4.0L Engine Engine Firing Order: 1-4-2-5-3-6 Distributorless Ignition 89642gf4.gif
prev.gif next.gif

Nov 06, 2010 | Mazda Millenia Cars & Trucks

2 Answers

Ignition oder mix up


FIRING ORDERS
NOTE: To avoid confusion, tag and remove the spark plug wires
one at a time, for replacement.

If a distributor is not keyed for installation with only one orientation, it
could have been removed previously and rewired. The resultant wiring would hold
the correct firing order, but could change the relative placement of the plug
towers in relation to the engine. For this reason it is imperative that you
label all wires before disconnecting any of them. Also, before removal, compare
the current wiring with the accompanying illustrations. If the current wiring
does not match, make notes in your book to reflect how your engine is wired.





Fig. 1: The firing order can usually be found cast onto the
intake manifold
91072p23.jpg






Fig. 2: 1984-88 2.5L engine Engine firing order: 1-3-4-2
Distributor rotation: Clockwise
86742ga3.gif






Fig. 3: 1989-98 2.5L engine Engine firing order: 1-3-4-2
Distributor rotation: Clockwise
86742ga2.gif






Fig. 4: 2.8L engine Engine firing order: 1-2-3-4-5-6
Distributor rotation: Clockwise
86742ga4.gif






Fig. 5: 4.0L engine Engine firing order: 1-5-3-6-2-4
Distributor rotation: Clockwise
86742ga1.gif






Fig. 6: 5.2L and 5.9L engines Engine firing order:
1-8-4-3-6-5-7-2 Distributor rotation: Clockwise
86742ga5.gif



prev.gif next.gif

Oct 31, 2010 | 1998 Jeep Cherokee

1 Answer

Just wondering if you have a breakdown diagram for a 1992 dodge colt 1.5l distributer


I do not have a breakdown diagram for a distributor, but just the firing orders and description of ignition system for the Dodge Colt and related models (based on Chilton manuals) if that's what you're looking for: FIRING ORDERS Fig. 1: 1990 1.8L SOHC Engines Firing order: 1-3-4-2 Rotation: clockwise 84182009.gif

Fig. 2: 1.6L DOHC Engine Firing order: 1-3-4-2 Distributorless Ignition 84182010.gif

Fig. 3: 2.0L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182011.gif

Fig. 4: 1.5L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182012.gif

Fig. 5: 1993 1.8L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182013.gif

Fig. 6: 2.4L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182014.gif

To avoid confusion, replace spark plug wires one at a time. --- Distributor REMOVAL & INSTALLATION Although the distributor can be removed from the engine no matter which cylinder is about to fire, it is a good idea to have number one cylinder at TDC before distributor removal. 1.5L, 1.8L, 2.4L SOHC Engines
  1. Disconnect the negative battery cable.
  2. Disconnect and tag the spark plug wires from the distributor cap.
  3. Disconnect the distributor harness connector.
    Fig. 1: Ignition system for the 2.0L engine 84183001.gif

    Fig. 2: Ignition system for the 1.5L engine 84183002.gif

    Fig. 3: Ignition system for the 1992-93 1.8L engine 84183003.gif

    Fig. 4: Ignition system for the 2.4L engine 84183004.gif

  4. Loosen the distributor retaining bolt and remove the distributor from the engine. To install:
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke. NOTE: Be careful not to turn it to the No. 4 cylinder TDC on its compression stroke by mistake.
  6. Align the distributor housing and gear mating marks.
    Fig. 5: Ignition system for the 1990 1.8L engine 84183005.gif

    Fig. 6: Distributor installation for the 1990 1.8L engine 84183006.gif

    Fig. 7: Distributor installation for the 1992-93 1.8L engine 84183007.gif

  7. Install the distributor into the engine, while aligning the fine cut (groove or projection) on the distributor flange with the center of the distributor mounting stud.
  8. Install and tighten the distributor retaining bolt.
  9. Reconnect the distributor harness connector.
    Fig. 8: Distributor installation for the 2.4L engine 84183008.gif

    Fig. 9: Distributor installation for the 1.5L engine 84183009.gif

    Fig. 10: Distributor installation for the 2.0L engine 84183010.gif

  10. Install the distributor cap and spark plug wires.
  11. Reconnect the negative battery cable.
prev.gif next.gif prev.gif next.gif

Oct 11, 2010 | 1992 Dodge Colt

1 Answer

I changed my spark plug wires and possibly have them connected wrong. Is there a schematic that I might follow in order to ensure they are connected correctly?


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1988-95 4.3L Engines Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise 91022g01.gif
Fig. 2: 1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise 91022g02.gif
Fig. 3: 1988-95 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor Rotation: Clockwise 91022g03.gif
Fig. 3: 1996-98 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor Rotation: Clockwise 91022g04.gif
prev.gif next.gif

Sep 18, 2010 | 1991 GMC Sierra

1 Answer

Firing order 1987 s10 v4


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1.9L engine Firing order: 1–3–4–2 Distributor rotation: counterclockwise 88442g01.gif
Fig. 2: 2.0L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g02.gif
Fig. 3: 2.5L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g03.gif
Fig. 4: 2.8L engine Firing order: 1–2–3–4–5–6 Distributor rotation: clockwise 85382014.gif
Fig. 5: 4.3L engine Firing order: 1–6–5–4–3–2 Distributor rotation: clockwise 85382015.gif
prev.gif next.gif

Aug 31, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

A miss in the firing order I need a digoram of the firing order


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 300 cid (4.9L) inline six-cylinder engines Firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise 85762008.gif
Fig. 2: 232 cid (3.8L) V6 engine Firing order: 1-4-2-5-3-6 Distributor rotation: Counterclockwise 85762006.gif
Fig. 3: 255 cid (4.2L), 302 cid (5.0L), 360 cid (5.9L), 390 cid (6.5L), 460 cid (7.5L) V8 engines Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise 85762007.gif
Fig. 4: 351 cid W & M (5.8L), 400 (6.6L) engines Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise 85762009.gif
Fig. 5: 6.9L diesel engines Firing order: 1-2-7-3-4-5-6-8 85762010.gif
prev.gif next.gif

Jul 17, 2010 | 1982 Ford F 150

1 Answer

Firing order for a 1986 gmc s15


FIRING ORDERS

To avoid confusion, ALWAYS replace spark plug wires one at a time.

The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.

db45c9c.jpg

Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise

cf6af5d.jpg

Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

5c33822.jpg

Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

cae855e.jpg

Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise

9674e44.jpg

Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise

I hope help you with this (remember rated this help) Good luck.

Oct 05, 2009 | 1986 GMC C1500

Not finding what you are looking for?
1993 Ford F350 Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...