Question about 2001 Chevrolet Impala
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sugest fuse ck 1st thing. Master bypasses individual controls. Power supply to rear windows is interupted. Ck for connevtor under front seats. Fuse may be labrled accessory or per win.
Posted on May 12, 2009
Hi: If other windows work then it can't be FUSE. I would take off the door panel and use a 12 volt test light to see if power is getting to the front passenger door motor (make sure power control switches are attached, key on position). If power... then hot wire the window motor using a 12 volt battery to see if it works. Hook + and - wires from battery directly to the motor, reverse them to make motor go up or down. To remove door panel pop electrical control up for the front and lift out then disconnect plugs. Use 7 MM socket to remove 2 screws under where handle is located. A Phillips screw driver removes the door handle cover. Pull on door panel to pop off, whole process takes under 5 minutes. If motor works and no power to motor from drivers door then there is a broken wire in circuit or the drivers control unit is not working. NEXT... disconnect drivers door control unit and check to see which brass terminals have power (key on position), note them... then put 12 volt power from battery to a terminal from plug that was attached to the passenger door motor, using your test light check drivers door plug to see if there is power to any terminals you DID NOT MARK as having power, if power then you know the circuit is good, do this with both wires from passenger door motor plug. (A circuit tester can be used as well). If continuity then the problem is in the drivers door control unit. If no continuity then a break in the wires to the passenger door, breaks usually occur between the body A pillar and where the wires go to the door as it flexes there every time the door opens or closes. Hope this helps, rate so I know if it is worth my while helping out on here.. thanks...
Posted on May 21, 2009
SOURCE: Window motor needs replacing
It may be your track, not the motor. You would have to take the interior door panel off to check. I would look at this first because the track is a less expensive part to purchase.
Posted on Jun 01, 2009
Tips for a great answer:
Jul 11, 2014 | 2001 Chevrolet Impala
Oct 24, 2013 | 2001 Chevrolet Cavalier
May 29, 2011 | 2003 Chevrolet TrailBlazer
Mar 18, 2011 | 2003 Chevrolet Impala
Jul 24, 2010 | 2001 Ford F350 Super Duty SuperCab
Apr 10, 2010 | 2003 Chevrolet Impala
Aug 02, 2009 | 2001 Buick LeSabre
Mar 29, 2009 | 2005 Chevrolet Impala
Jan 06, 2009 | 2001 Chevrolet Impala
93 people viewed this question
Usually answered in minutes!