Question about 2002 Oldsmobile Alero
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had the same problem this weekend and fixed it. I experienced the same difficulty. You need to remove a couple covers to allow good access to the back of the hazzard switch. First remove the vent that is located just ot the right of the hazzard switch. There are 2 metal clip at the botton side of the vent. Push up on the clips with a screw driver and pull the vent out. Next remove the black plastic bezzel for the gauges. The bezzel is held in place with 2 screws. Now you should have access to the hazzard switch from the left and right side. The hazzard switch mounts (clips) into a black plastic bracket. I was not able the remove the hazzard swich by pressing on the 2 clips, so I removed the 3 screws that held the bracket to the dash and removed the entire assembly. Hope this helps. I only ended up with a few minor scratches.
Posted on Apr 13, 2009
SOURCE: how to replace a hazard
I know in 2004 models, The multi-function switch is in your steering wheel. It's the signal stalk and wiper stalk. It's a one piece unit.
If you take off the top half of the steering column cover, you can access the connection for the switch. Unplug it and see if the noise continues.
Posted on Mar 05, 2011
Tips for a great answer:
Aug 22, 2014 | 2002 Oldsmobile Alero
Jul 27, 2011 | 1999 Oldsmobile Alero
Oct 01, 2010 | 2000 Oldsmobile Alero
Jan 25, 2010 | 2002 Chevrolet Malibu
Dec 10, 2009 | 2001 Oldsmobile Alero
Oct 15, 2009 | 2002 Oldsmobile Alero
May 24, 2009 | 2000 Oldsmobile Alero
Dec 21, 2008 | 2002 Oldsmobile Alero
132 people viewed this question
Usually answered in minutes!