Question about 2002 Oldsmobile Alero

1 Answer

Remove door panel to fix power window. - 2002 Oldsmobile Alero

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 643 Answers

There are 6-8 plastic clips going around the door you will need to get the removeal tool from your local parts store,or you can use a flathead screw driver.make sure to unscrew ALL screws before taking off the panel.

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install power window cable


cable? (electric>?)
here is the page on motor;reg.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the window regulator from the door.
    • Remove door trim panel.
    • Remove isolator.
    • Remove front door glass.
    • Loosen bolts attaching regulator to inner door panel.
    • Remove bolt attaching regulator to inner door panel.
      • Lift regulator upward to disengage bolts from door inner panel.
      • Disengage power window regulator harness connector, if equipped.
      • Remove regulator through access hole in door
    • Place the window regulator on a suitable work surface and remove the screws that secure the power window motor to the window regulator.
    • Remove the power window motor from the window regulator.

Jul 04, 2014 | 2000 Jeep Grand Cherokee

3 Answers

1997 mercury grand Marquis driverside rear window motor works but window won't go up. Inner door panel off. Metal cable with a black foam cover and pink plastic clip off. Can't figure what it fits to.


usually this means you need a new window regulator.

Section 01-11: Glass, Frames and Mechanisms 1997 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Window Regulator, Power Front Door
Removal
  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, go to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    3. Disconnect window regulator electric drive harness connector.
    4. sva~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Be careful not to strike or scratch front door window glass because it can break.
      Remove window regulator electric drive retaining screws through holes.
    5. Remove window regulator electric drive (23394) from front door power window regulator.
    6. Raise front door window glass to full up position by hand and secure with tape.
    7. Go to Step 5.

  2. Remove front door trim panel and front door trim shield. Refer to Section 01-05 .
  3. Remove front door window glass as described.
  4. Disconnect window regulator electric drive harness connector.
  5. NOTE: Use care not to enlarge sheet metal holes in the door inner panel.

    Remove two 1/4-inch rivets retaining lower bracket of front door power window regulator to inner panel. Use drift punch to knock out center pins for each rivet. Using a 1/4-inch diameter drill, drill out remainder of rivet.
  6. Remove three window regulator electric drive retaining screws from inside door to remove window regulator electric drive from front door power window regulator.
  7. Remove two window regulator retaining nuts.
  8. Remove front door power window regulator from front door (20124).
Installation
  1. Lubricate regulator mechanism with Teflon® Lubricant E7FZ-19590-A or equivalent meeting Ford specification ESB-M1C111-A.
  1. Install front door power window regulator minus motor (23208) into access hole in inner panel.
  1. Position front door power window regulator using upper studs and tabs on window regulator electric drive mounting bracket.
  1. Install rivets retaining front door power window regulator to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used).
  1. Install two upper front door power window regulator retaining nuts.
  1. Install window regulator electric drive with three screws. Do not overtighten screws.
  1. Connect the window regulator electric drive harness connector.
  1. Install front door window glass.
  1. Adjust front door window glass as described.
  1. Install front door trim shield and front door trim panel. Refer to Section 01-05 snorkelbobby_38.gif

Feb 14, 2011 | 1997 Mercury Grand Marquis

1 Answer

New power window regulator installed, now window goes up to top then comes back down half way and stops. How to adjust?


It is important to learn how to fix a Honda Accord window if you have an older Honda Accord. Although the Honda Accord is renowned for being a durable vehicle, the electric window motor regulators in older models can wear out over time. This is noticeable when you hear sounds coming from the window when you attempt to use it but the window won't move. But don't worry, you can use these steps to fix a broken window in your Honda Accord.

To fix a Honda Accord window, you will need:
  • A Phillips screwdriver
  • A flathead screwdriver
  • A wrench set
  • A black marker
  • Masking tape
  • A new Honda Accord electric window regulator
  1. Remove the screws securing the door panel from the inside of the vehicle. These screws are beneath the arm rest. Release the door panel by prying it away from the front of the door. Work your way back by prying off the top and sides of the panel and the back of the panel.
  2. Remove the clips holding the door panel using a flathead screwdriver to pinch them together. Remove the panel by sliding it upward and away from the door.
  3. Remove the two bolts securing the window to the regulator. Note the position where the bolts secure the windows. When you re-install the window you will need to adjust them similarly. Making a small mark on the window with a black marker is a good way to easily keep track of the correct position.
  4. Lift the window directly up and remove it from the car door. Secure it using masking tape if you prefer not to remove it completely.
  5. Remove the bolts securing the window motor and guide. Remove the window motor and guide and set them aside.
  6. Remove the regulator from the power window motor assembly. Dispose of the old regulator and install the new unit.
  7. Re-attach the window motor and guide to the door by following the removal instructions in reverse. Test the new window regulator by turning on your ignition switch and moving the window up with the electric switch.
take it back apart somethings not tight

Dec 07, 2010 | 2004 Honda Accord

1 Answer

Need to take door panel off v.w golf 1997 to fix window that is not going up. Where to start???


  • 1 Unscrew the door lock knob and remove the plastic trim cover from the inner door handle. If the Jetta has power windows, unplug the wires to the power window controls. Remove the screws with a Phillips head screwdriver.
  • 2 Turn the window regulator handle to the 9 o'clock position if the car has manual windows. Using a small, flat head screwdriver, slide the spacer, which is at the 3 o'clock position, directly away from the handle, and remove both it and the handle.
  • 3 Use the small, flat head screwdriver to remove the speaker grille. Remove the mounting screws and pull the speaker from the door. When they become accessible, unplug the wires from the back of the speaker.
  • 4 Pry the door panel away from its retaining clips by sliding a long flat head screwdriver between the door panel and the door. Slowly remove the door panel, once all retaining clips have released, by pulling it out from the bottom, then lifting it up and forward to move the door panel around the interior door latch

  • are you replaceing the regulator that makes the window go up and down or the glass you didnt say you just asked how to take door panel off hope this helps tell me if you need more info

    Dec 04, 2010 | 1997 Volkswagen Golf

    1 Answer

    I need to know how to get the drivers side door panel off. My window is off track and I need to fix


    how to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
    thats it reverse to put back on

    Nov 25, 2010 | 1997 Ford Expedition

    1 Answer

    How to relace power window motor


    Motor
    1. Raise the window glass to the full-up position if possible. If the glass cannot be raised and is in a partially down or full-down position, it must be supported so that it will not fall into the door well when removing the window motor.
    2. Disconnect the negative battery cable.
    3. Remove the door trim panel and watershield.
    4. Detach the window motor harness connector.
    WARNING

    If the front door power window regulator counterbalance spring must be removed or replaced for any reason, make sure that the front door power window regulator arms are in a fixed position prior to removal to prevent possible injury during c-spring unwind.


    WARNING

    If the front door power window regulator counterbalance spring must be removed or replaced for any reason, make sure that the front door power window regulator arms are in a fixed position prior to removal to prevent possible injury during c-spring unwind.

    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 32; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    1. Remove the three window motor mounting screws.
    2. Remove the window motor.

    To install:

    1. Position the window motor to the power window regulator. Install the three screws snugly but do not tighten all the way.
    2. Attach the window regulator electric drive wires at the connector and cycle the door window glass to make sure the motor gear engages. After the gears are engaged, tighten the three window motor retaining screws to 54-88 inch lbs.(6-10 Nm).
    3. Connect the negative battery cable.
    4. Check the power window for proper operation.
    5. Install the door trim panel and watershield.
    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 32; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    Sep 13, 2010 | 1998 Ford Taurus

    1 Answer

    How to fix drivers window.the window just feel in to the door panel. it is a power window. WHAT WOULD BE THE PROBLEM.


    window came of track inside door maybe rollers came out of place have to remove door panel to access

    Apr 05, 2010 | 1991 Chrysler New Yorker

    1 Answer

    How to remove the inside door panel from a dodge 2005 2500 pick up


    FRONT DOOR TRIM PANEL - REMOVAL
    Release door latch and open door.
    Roll window down.
    Remove window crank Window Crank - Typical , if equipped.
    Remove screws attaching trim panel to door Door Trim Panel and Trim Panel Screw
    CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

    Simultaneously lift upward and outward to release retainer steps from inner door panel Trim Panel Retainer
    Disengage inside handle linkage rod from inside handle.
    Disconnect speaker harness wire connector Speaker And Power Mirror Connector
    Disengage power mirror wire connector, if equipped (driver's side only) Speaker And Power Mirror Connector
    Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped Power Door Lock/Window Connector
    Separate door trim panel from vehicle.
    INSTALLATION
    Position trim panel at door.
    Engage wire connector for window/lock switch panel, if equipped. Engage clips attaching power window/lock switch panel to door trim panel.
    Engage power mirror wire connector, if equipped.
    Connect speaker harness wire connector.
    Engage inside handle linkage rod to inside handle.
    Align trim panel retainer steps with inner door panel and slide trim panel into place.
    Install screws attaching trim panel to door.
    Install window crank, if equipped.

    Hope helped with this; remember rated this help. Good luck.

    Nov 12, 2009 | 2005 Dodge Ram 2500 Truck

    1 Answer

    Door panel removal


    The book says 1. remove panel pull strap 2. remove door handle bezel 3. on 1995-2001 models,remove power accesory panel and trim panel upper extension. 4. remove armrest screws and pad. 5. remove window handle,I guess if not power windows.
    KD makes a tool to go in between door panel and door to pop the door clips loose. KD 3705
    You will also have to have a window crank tool if it is manual window. KD431
    Hope that will help.

    Mar 23, 2009 | 2001 Chevrolet Silverado 1500

    1 Answer

    Remove right rear door panel


    1. Remove the rear door power window/power door lock switch
    2. Remove the door handle bezel. Remove the door trim panel screw located behind the door handle bezel.
    3. Remove the door trim panel screws located by the armrest handle.
    4. Remove the door trim panel using J 38778.
    5. Disconnect the electrical connectors.
    6. Remove the door trim panel from the door.
    INSTALLATION PROCEDURE

    IMPORTANT: Discard the old door trim panel retainers and replace with new retainers before installing the trim panel

    1. Install new trim panel retainers to the rear door trim panel.
    2. Connect the electrical connectors.
    3. Align the door trim panel retainers to the door.
    4. Press the door trim panel at the retainer locations until the retainers are fully seated.
    5. Install the trim panel screws. Tighten Tighten the door trim panel screws to 2 N.m(18 lb in) .
    6. Install the power window/power door lock switch


    Nov 04, 2008 | 1998 Oldsmobile Intrigue

    Not finding what you are looking for?
    2002 Oldsmobile Alero Logo

    143 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...