Question about Ford Crown Victoria

1 Answer

My son took the belt off, And he don't remember how it went on. If I hadn't worked 8 hrs this morning... I'd probably be able to figure it out... But I'm dead tired. I know it's probably REAL SIMPLE, and I'll feel like an idiot after you help me! OH WELL!! Somedays you get the bear and then there's a time when he gets you! today is my day to be had.. THANK YOU!! A.W.

Posted by on

  • johnny mcneely Nov 13, 2010

    please clarify what kind of car, size of motor, hint. sometimes you will find the belt routing on a sticker under the hood or in front of radiator on that cross panel, but if not please verify the make, model and engine size and i'll be happy to help you!! thank you for choosing!


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Serpentine belt???? Generally the new belt comes with a diagram on the pacjage. If not most of the time the highest pully is the one you start with first working your way counter clockwise and then you need to fit it over the tensioner last. You should be able to tell which way to route it by what the pullys look like the inside of the belt rests over grooved ones and and the outside fits under the smooth ones. Hope this helped!

Posted on Nov 13, 2010

  • aaron_reeder Nov 24, 2010

    1991 Chevrolet Suburban 5.7 Liter


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

Took my car to get repaired said it was water cost 800.00 dollars said it would take 7 hrs to fix is this true

A ball park figure would be around $600 with cost of pump and labor with labor being most of cost as placement of pump. But I would say you have the full right to have a second opinon of what is wrong with your car before you pay out that amount. Remember you are the customer and they are the client. And cost difference of thermostat and pump is some bills and pcoket changes as you have shown above.

Jun 18, 2014 | 2004 Dodge Stratus

1 Answer

Car is not starting but the lights come on and the horn works

You know how old the battery is?

You tested the voltage across the terminals?
Got 12.6 volts?

May 29, 2012 | 2003 Cadillac Seville

1 Answer

Random or miltiple misfires,on 1996 chevy blazer.We have tried everything.any ideas. done tried new cap,wires,plugs,

If you have no check engine light it's more than likely the Timing Belt/Chain system needing repair. If you have a check engine light it is probably the cam or Crank position sensor sending bad signals. If you hadn't said you replaced the cap and distributor already I would point you to checking the inside of the cap to see if someone took a pencil to the inside, very old trick.

Sep 13, 2011 | 1996 Chevrolet Blazer

1 Answer

I hadn't run the car in a couple of years so, I went and got new battery. The dash and everything comes on but all I get is a clicking sound when I turn the key. I heard it could be a seized stater...

try putting the battery on charge for at least 24 hrs as i have a funny feelinjg it could be your new battery has been on the shelf for too long

Aug 01, 2011 | BMW 325 Cars & Trucks

1 Answer

My son just purchased a 2006 GMC Envoy and Check Engine Light kept going on. Dealer said it is due to Secondary Injection Pump (Code P0410),which my son paid them to replace. Again, Check Engine Light...

Until yesterday, I have never had a serious mechanical issues with my 2006 Envoy Denali, which only has +/-60K Miles (under extended 100K Mile warranty).

Yesterday, however, while taking an interstate on-ramp (I think I hit 40 MPH tops?), my 5.3L V-8 engine shut down while in use. I immediately pulled over, as my power steering went out when the vehicle shut off, and coasted to a stop on the shoulder.

My vehicle would not restart... the dealership took a look at it this morning, and their preliminary findings are that the engine threw a rod, there's metal shavings, and some liquid (water?) in the engine.

I'm still awaiting their full estimate of the damage.

Aug 19, 2010 | 2006 GMC Envoy

2 Answers

Free dowload for 2000 toyota avalon service manual

Check in (free register). Hops helps, and remember rated this.

Jun 21, 2010 | 2000 Toyota Avalon

1 Answer

How much in general would a timing belt and water pump replacement be on a 95 gran caravan 3.0?

ALOT....have been working on ours @ home for 6 hrs with 2 very good air tools..can almost see the pump by now. remove Air conditioning compressor motor mount various pulleys power steering pump lots of brackets timing belt cover...thats where we are now. probably a 6-8 hr job for a professional shop @ 60/hr $500 for labor $35 for the pump from parts store...

Jun 13, 2009 | 1994 Dodge Grand Caravan

1 Answer

Jeep runs for twenty minute and stall.

Hello now that I see this messages you making me to remember when this use to happen to me I was totally mad especially that I try everything even on my wedding Honey moon it was a disaster I took my truck to my Honey moon it was 12 hrs from home but it took me around 20 hrs once I get back home from my trip I decide to spend a full day trying to find out what was wrong with my truck I had a dodge ram 1500 1995 5.9 engine and the main problem was with the fuel pump it run fine for about 3 hrs and then it die and I had to wait around 20 minutes and then run another 2-3 hrs in low speed the higher the speed the less time it took to fail again how I found it was the pump well inside in the engine compartment there is a fuel line with a valve to check the fuel pump pressure I did run my truck hard until the fail occur then I install the pressure gauge try to turn the switch on and it was no pressure at the line problem solve the fuel pump was getting hot after couple of hrs running sometimes it only took about an hour to fail try this and see if you have the same problem it could be a different problem but it is good to know this

Apr 15, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Starts, but put it in gear, it goes dead. will idle.

1. Had mechanic check timing again. Belt off a couple degrees. Should fix problem.
2. Don't know. this is my son-in-laws car.
3. No.
4. I think valves were bent due to timing belt breaking and son-in-law trying to start car when it went dead.
5. Will do this if timing belt reset don't work.
Thanks for your reply.

Oct 23, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides