Question about 1999 GMC Jimmy

1 Answer

How to stop the power steering pulley to stop turning to get the puller to pull it off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers

Wrap an old belt around the pulley and clamp ends together with a pair of vice grips. this gives you something to hold onto to keep the pulley from turning

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Took the motor off to pull the deal that goes to the pump off but can't get it off. Is there a trick to it? Special tool other than a puller? I want to put another pulley on it to use my old pump


Power steering pump requires power steering puller and has to be pressed on with the same tool you can rent from Oreilly s or Auto Zone. If it is a harmonic balancer it requires its own type puller. Every component has its own special puller.

Apr 23, 2015 | Cars & Trucks

2 Answers

Trying to remove pulley off of power steering pump


need a power steering pulley puller / installer because the pulley is pressed onto the shaft. the puller kit can be rented at local part houses like advance, autozone,etc.

Jul 14, 2011 | Chevrolet Impala Cars & Trucks

2 Answers

How to remove pully from powersteering pump?


You need a power steering pulley puller. This is about the least expensive one that you will find:

http://www.harborfreight.com/pulley-remover-and-installer-set-40749.html

Be careful not the bend the pulley as they are $100-200 for a replacement! Soak the center shaft with a quality penetrating oil like Kroil or PB Blaster for a day or two before.

Jan 01, 2011 | 1990 Ford F150

1 Answer

How to change power steering pump on gmc 2500hd


you will need a power steering pulley puller to first pull off the pulley

Dec 09, 2010 | 2003 GMC Sierra 2500HD

1 Answer

Changeing a power steering pump


CHANGING POWER STEERING PUMP YOU HAVE TO PLACE A DRAIN PAN UNDER THE VECHICLE. SIPHON OUT POWER STEERING FLUID WITH A SIPHONER DONT USE YOUR MOUTH TO SIPHON SWALLOWING POWER STEERING FLUID CAN BE FATAL MAKE YOU SICK.WHEN ALL POWER STEERING FLUID IS REMOVED FROM POWER STEERING PUMP.REMOVE DRIVE BELT.THEN REMOVE THE POWER STEERING PUMP.THEN YOU HAVE TO REMOVE THE POWER STEERING PUMP PULLEY THE NEW POWER STEERING PUMP DONT HAVE A PULLEY YOU HAVE TO HAVE REMOVE PULLEY FROM THE OLD POWER STEERING PUMP.YOU NEED A PUMP PULLEY REMOVER AND A PULLEY INSTALLER.YOU CAN TAKE OLD POWER STEERING PUMP AND NEW POWER STEERING PUMP TO A MACHINE SHOP.THEY WILL REMOVE PULLEY OFF OLD PUMP PRESS IT ON NEW POWER STEERING PUMP.THAT WOULD BE CHEAPER THAN BUYING THE PULLER AND INSTALLER.GO TO AUTO PARTS STORE BUY NEW HIGH PRESSURE LINE O RING GOES TO PRESSURE LINE GOING INTO POWER STEERING PUMP.ONCE YOU GET NEW PUMP READY PULLEY BEEN PRESSED ON.TAKE POWER STEERING PUMP HOME PUT IT ON. BLEED POWER STEERING SYSTEM.WHAT YOU DO WHEN YOU GET NEW PUMP INSTALLED HIGH PRESSURE LINE IN PLACE.PUMP BOLTED IN DRIVE BELT ON POUR POWER STEERING FLUID IN POWER STEERING PUMP UNTIL FLUID LEVEL STOP DROPPING AND YOUR LEVEL ON POWER STEERING DIP STICK AT COLD LEVEL.NOW START CAR UP LET IT IDLE FOR 3 MINUTES.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID IF FLUID LEVEL DROP ADD LITTLE MORE UNTIL LEVEL ON DIP STICK ON COLD MARK DONT OVER FILL.NOW SAFELY RAISE SUPPORT FRONT OF VECHICLE. START THE ENGINE.TURN STEERING WHEEL FROM ALL THE WAY FROM LEFT TO RIGHT DONT STOP LOCK WHEEL .GO LEFT TO RIGHT SEVERAL TIMES.THEN TURN OFF ENGINE CHECK FLUID LEVEL.IF ALL IS GOOD LET VECHICLE BACK DOWN LET IT SIT FOR A WHILE CHECK FLUID AGAIN.DONT DRIVE VECHICLE IF POWER STEERING PUMP MAKE NOISES OR YOUR STEERING FEEL STIFF HARD TO TURN.JUST MAKE SURE FLUID LEVEL RIGHT AND DRIVE BELT TIGHT GOOD LUCK.

Nov 02, 2010 | 1999 Oldsmobile Alero

1 Answer

Replacing water pump on 2002 buick regal gs 1 bolt is behind pulley for steering pump how do i remove the pully


I haven't worked on the newer buicks but I play with alot of chevrolets and depending on the setup it maybe easier to pull the power steering pump bolts and lay it off to the side than it will be to pull the pulley of and press it back on. If you want to pull the pulley you will need a universal pulley puller available at most part stores, if the pulley has bolts in it you will remove the bolts and the puller will have bolts that will slide into the existing holes allowing you to remove the pulley.

Sep 23, 2010 | 2002 Buick Regal

2 Answers

I am trying to use a puller to pull the pulley off of a power steering pump but no matter what brand or kind they always slip right off.


There is a specially made puller that is used to remove and install these pulleys. It is a multi-part puller that has a two part holding fixture that grabs onto the nose of the pulley and is held there with a metal sleeve that slides over it. Once it is on there is a center bolt and nut that you turn to pull the pressed-in-place pulley off of the shaft. The tool also is used to press the pulley back onto the shaft. Some parts stores will rent you this puller but they aren't very expensive if you have to buy one. These pulleys are on there pretty tight as it's just friction that keeps them in place. MAKE SURE you note how far the original pulley is pressed onto the shaft so you get it pressed back to that same spot when you are done otherwise you can end up with a belt that won't track straight, derails, or is noisy. Good luck, hope this helps!

Jul 19, 2010 | Cars & Trucks

1 Answer

Power steering pulley on ford escort van 92 has


you will need power steering pully puller you can rent them at most of your local part house or you can buy them there you will need to pull of belts then the pully hope this helps

Sep 28, 2009 | 1992 Ford Escort 4 Door

1 Answer

How do i pull the power steering pulley


You need a special puller for that.Can get for about 25 bucks at an auto store

Nov 29, 2008 | 1993 Chevrolet C1500

Not finding what you are looking for?
1999 GMC Jimmy Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...