Question about 2005 Mazda Tribute

2 Answers

ABS Light Illuminated - 2005 Mazda Tribute

Posted by on

  • Merl Townsend Aug 27, 2012

    I have a 2003 Pontiac grand am asb brake light comes on , then trac off light comes on , and vehicle needs repair soon , what doi do?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,370 Answers

There are few possible options that you will have to check and confirm the problem. The ABS light turns on when there is a problem in braking system. In this case ABS brakes need fluid or that it is malfunctioning. If the ABS light remains illuminated, this indicates a major problem that has disabled the ABS brakes. A major problem could be a fault in wiring harness or wheel speed sensor. If the light turns on then goes out this indicates a minor problem and the ABS brakes may still function. This is more likely to be an issue of low brake fluid or a brake pad that is wet or worn out.Get the above possibilities checked and confirm the fault.This will help to solve the ABS light illuminating problem.--------Thanks.Helpmech.

Posted on Nov 13, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

That means there is a problem with your anti-lock brake system. should be looked at by a pro unless you are familiar with the new braking systems

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New hub and abs light come on when turning or hit bumps


The brake sensors. Cars with antilock brakes have an amber or yellow warning light, which usually says ABS. If this light stays illuminated after the bulb check, it indicates a problem with the antilock braking system. The ABS controller will disable the system and your brakes should function as if you don't have ABS. In this case, you can safely drive the car to a mechanic for service.

Mar 16, 2015 | Cars & Trucks

2 Answers

2004 ford explorer abs light constant and 4x4 blinking any ideas?


According to the manual pg 10. http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/04expog3e.pdf
Anti-lock brake system: If the ABS light stays illuminated or
continues to flash, a malfunction has been detected, have the system
serviced immediately. Normal braking is still functional unless the brake warning light also is illuminated.

Apr 16, 2014 | 2004 Ford Explorer XLT

1 Answer

Esc light and the abs light stay on in my 2007 hyundia santa fe


abs will be abs sensor is in hub bearing.next is the engine code?

Feb 26, 2013 | 2006 Hyundai Sonata

1 Answer

Why is my abs warning light stoppinng on


The abs light illuminated to test the system and usually goes out after a couple of seconds to say everything is ok.
When the light stays on, it means there is a fault with the system and need rectifying. :)

Jul 03, 2012 | 2003 Vauxhall Vectra

1 Answer

How do you turn off the abs


Safety feature on this vehicle, only way to disable it is to either pull the abs relay out from the fuse block under neith the hood or even pull out the abs fuse, however the abs light will stay illuminated because of this..

Jun 10, 2012 | 2000 Ford Expedition

1 Answer

While i was driving on highway my abs light and traction control light became illuminated.both stay illuminated while car is in drive.when first starting car the lights are not illuminated.Two days later...


I've had the same type problems before and it turned out to be caused by my weakening alternator, if able to do so I would suggest, to begin ruling out causes, remove the alternator and take it to an auto parts store that offers free testing and have the test performed.

Jan 27, 2011 | Lincoln LS Cars & Trucks

1 Answer

The abs light has illuminated on Toyota Celeca. No


Most likely, you either have a bad wheel speed sensor, or corrosion built up on the teeth, on the axles, that the speed sensor counts.

Oct 28, 2009 | 1997 Toyota Celica

1 Answer

ABS light


It is picking up a signal from one of the wheel sensors probably.

Go here to read files on ABS issues

http://autos.groups.yahoo.com/group/villagerquest/

  • Anti-Lock Brake Warning Indicator Always On
  • Fuse(s).
  • Circuit.
  • Hydraulic solenoid relay.
  • Hydraulic pump motor relay.
  • Brake anti-lock sensor(s).
  • Hydraulic anti-lock actuator assembly.
  • Anti-lock brake control module.
  • GO to ABS Quick Test .

QT5 PERFORM ABS TROUBLE CODE RETRIEVAL
  • Key OFF.
  • Jump Pin 4 of the data link connector to ground.

    5939e8a.gif

  • Key ON.
  • Observe the anti-lock brake warning indicator.
NOTE: The first code to flash will be the start code (12). Also, each code is repeated three times before proceeding to the next trouble code.

Does the anti-lock brake warning indicator flash codes? Yes No RECORD code(s). GO to the following ABS Trouble Code Identification Chart in this section and PERFORM Pinpoint Test specified for first code retrieved. If indicator is illuminated constantly, GO to Pinpoint Test D1 . If indicator is not illuminated, GO to Pinpoint Test A1 .


df42bc3.gif

Jan 02, 2009 | 1993 Mercury Villager

1 Answer

ABS Light illuminated on Van


ABS diagnostics requires a scan tool (Chrysler DRB II, DRB III or aftermarket equivalent). the plug is located near the brake pedal. this is the only alternative to get the ABS light off.

Nov 08, 2008 | 2000 Dodge Grand Caravan

Not finding what you are looking for?
2005 Mazda Tribute Logo

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...