Brake lights are staying on. It has to do with a part under the dashboard where the pedal goes up to , its round. I dont know what its called and there are two of them. they are plastic and mine broke which is causing my lights to stay on killing my battery not to mention its dangerous for people behind me.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no need to open any thing jst lay down under your brake pedal by pushing your seat back.. u will see the cylinderical push button, just remove its grip first n then unscrew it carefully and replace it with same specifications....
if you are talking about the brake light on the drivers dashboard, it is because the brake fluid reservoir on the master brake cylindar is low. You need to add DOT-3 brake fluid to it.
if you are talking about the tail lights, it could be that the brake pedal is not returning to rest. Pull the brake pedal back towards you when you are sitting in the drivers seat. Light still on, suspect the brake pedal switch. It is right there under the dash. Just look up the brake pedal
the switch for your brake lights is located near your brake pedal,it is usually a spring loaded switch that comes out when the pedal is pushed & the pedal pushes it back in when it is released,this switch may have come loose & is active all the time,you need to make sure that it is pushed hard up against the brake pedal & tighten the adjusting screws to lock it in position,check that your stop lights come on when the brake pedal is pushed in....hope this helps....cheers
You could have faulty altenator or short causing the battery to drain. The engine light usually comes on when anything electrical or sensor wise is faulty. Brake light will come on if, low brake fluid, e-brake handle is up.
BRAKE SWITCH BEHIND THE PEDAL IS NOT TOUCHING THE SWITCH TO CLOSE THE CIRCUIT,
MIGHT LIKE TO GET UNDER NEED THE DASHBOARD AND LOOK BEHIND THE BRAKE PEDAL,THERE IS THE BRAKE SWITCH MAKE SURE IS MAKEING GOOD CONTACT WHEN RELEASE BRAKE PEDAL.