Question about 2007 Jeep Wrangler Unlimited Rubicon 2 Doors

1 Answer

Clunking noise in steering - 2007 Jeep Wrangler Unlimited Rubicon 2 Doors

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,206 Answers

Several things can cause this ..first check the steering column out in the engine compartment common problem is the column universal joints they freeze up with lack of lubrication have some one turn the steering wheel and you watch the shaft joints if they snap or have signs of rust that is your problem other causes are sway bar links that freeze up in the same way causing the snapping to vibrate up to the steering system. hope this helps you good luck

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2004 polaris ATP 500 when turning there's a clunking noise I changed wheel bearings and noise still there ! Checked u joints not really a lot of play in them!


2011 Sportsman 500 Trans Clunk - ATVConnection.com ATV Enthusiast ...

atvconnection.com/.../polaris/343211-2011-sportsman-500-trans-clunk.h...
Mar 21, 2012 - It is really noticeable when wheel is turned when you get on the gas from a. ... 2011 Sportsman 500 Trans Clunk ... You have to figure from the motor to the clutches,then to the transmission,then to the drive shafts,there is going ... 1999 Sportsman 500,slight clunk from dead stop
Feb 28, 2015
Clunk or pop in the steering on an 07 Sportsman 500 ...
Aug 8, 2008
500 HO, rear end noise
Apr 29, 2006
clunking noise on scrambler 500...
Jan 31, 2000
More results from atvconnection.com

Sep 25, 2015 | Cars & Trucks

1 Answer

Clunking in steering


ball joints on steering need replacing is my guess

Nov 11, 2013 | 2002 Ford Escort

1 Answer

Clunking accelerating or turning sharply to the left.


Check the front suspension ball joints and steering joints. Check wheel bearings and adjustment. Check shock absorber mounts for condition . Check steering insert condition and top mount rubbers and bearings if McPherson strut set up.. If you have a steering shock absorber then check it's condition and mounting

Sep 29, 2013 | 1997 Ford Explorer AWD

1 Answer

Clunking noise while driving, turning steering wheel left and right, putting gas on pedal almost anything I do it clunks and check engine light is on.


while turning my wheel left to right , I here a clunking noise. what should I do or is it rubber some where worn out

Apr 13, 2013 | 2005 Chrysler Pacifica

2 Answers

I have a 2005 Pontiac grand am and every time I go around a corner, doesn't matter if its a left or right turn, I hear what sounds like a grinding noise coming from the front of the vehicle near the...


this might help:
Here is the Technical Service Bulletin that maybe of help, worth looking into but can't guarantee that it would fix your problem Steering - Steering Column Clunking When Turning TECHNICAL Bulletin No.: 01-02-32-001P Date: November 25, 2009 Subject: Clunk Felt/Noise Heard From Steering Column, Steering Gear and/or Front Of Vehicle During Turning Maneuver and/or Steering Wheel Rotation (Replace Intermediate Shaft As Directed) Models: 2001-2004 Buick Regal 2005-2008 Buick Allure (Canada Only), LaCrosse 2000-2008 Chevrolet Impala 2000-2007 Chevrolet Monte Carlo 1998-2002 Oldsmobile Intrigue 2004-2007 Pontiac Grand Prix Supercede: This bulletin is being revised to add the 2008 Buick LaCrosse/Allure. Please discard Corporate Bulletin Number 01-02-32-001O (Section 02 - Steering). Condition Some customers may comment on a clunk type noise coming from the front of the vehicle while driving during a turning maneuver.

1. Locate a large area (parking lot) where the vehicle can be turned in a tight circle. 2. Turn the steering wheel to the right and/or left all the way to the steering lock, then off the steering lock a 1/4 turn. 3. Drive the vehicle approximately 5 km/h (3 mph) in a circle, preferably over rough pavement or seams on the road surface. 4. Drive the vehicle straight ahead at idle speed while applying and releasing the brake pedal. Listen/feel the steering wheel for the clunk/noise condition. 5. If a clunk is felt in the steering wheel, the MOST likely cause is the I-shaft - not the steering gear. Continue with the correction. Correction DO THIS - Replace the intermediate shaft DON'T DO THIS - DO NOT lube the intermediate shaft Replace the existing intermediate shaft

Apr 13, 2013 | Cars & Trucks

1 Answer

The steering on my citoen zara 1.6 is making lots of banging noises when turning It pulled left for a while then after some noises returned to normal


your clunking is probably caused by a bad steering u-joint or knuckle at the bottom of the steering column.(at rack and column)

Aug 31, 2012 | Cars & Trucks

1 Answer

Clunking noise when you turn the steering wheel while driving


The noise will be either the universal joint on the steering column or a component in the steering rack or outer tie rod ends, get someone to sit in the car and move the wheel slightly left and right and have a look and you will be able to see and hear where the noise is coming from

Mar 08, 2012 | 1998 Dodge Stratus

2 Answers

Everytime i turn the steering wheel i hear a loud clunking noise, i know its not the strut mounts, i know both tie rod ends are brand new within the past year plus they dont make a clunking noise like...


clunking noise may be bad steering rack. either the bolts that hold it to the frame may have worked loose,the center of your vehicle is where the steering racks located,just under the center of floorboard.under dash but on floorboard.make sense? try turning the steering wheel with engine running,place your hand under the radio,but on floorboard,when you turn the steering wheel from side to side,do you feel a thump? if so,then your steering racks loose or bad. the only way to know for sure is to have someone who knows about the steering rack to inspect it visually. thank you for choosing fixya.com

Apr 03, 2011 | 1997 Pontiac Sunfire

1 Answer

My 2006 ION steering makes clunking noise which


I have had that problem with my wifes car,i called a mobile repair guy to come out and tighten something in the steering column,cost me about $50

Dec 31, 2009 | 2005 Saturn ION

1 Answer

2004 clunking noise thru steering!


Its probably the intermediate steering shaft. The shaft where it goes thru the firewall is known for clunking on these trucks. GM makes a lube kit to fix the noise. I don't have the part number handy, but the parts guy at the local dealer will know what you are looking for.

Good Luck

Sep 02, 2008 | 2002 Chevrolet Tahoe

Not finding what you are looking for?
2007 Jeep Wrangler Unlimited Rubicon 2 Doors Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...