Question about 2000 Dodge Intrepid

1 Answer

Engine replacement hi I have a 2000 intrepid 2.7 ltrs V6. twin cam. i had the mtr change for a 2006 dodge seebring apparrently its the same mtr,we used the old cam pulleys and rocker cover, after the installation the car did want to start with the cam sensor connected, but stated well when disconnected, the problem is that when you give it to mutch gas the mtr stall and gerks release the gas petal and it will work normally, the other problem is that the onboard computor cant locate the cam shaft but does with the crank shaft, is it possible that the onboard computor should be re-program... i would realy appreciate a prompt answer to my problems.... many thanks len

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Yes, and update the software too on the computer... it happened to my mom...

Posted on Jun 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you put antifreeze on 2002dodge intrepid


Terry, Add coolant to the reservoir located under hood, mounted by shock tower and fuse/relay center, fill to the full mark on side of coolant reservoir when cold, recheck after running and engine cold again. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Add Coolant Dodge Intrepid 1998 2004 2000 Dodge Intrepid ES 2 7L V6
Auto Repair Replace Engine Coolant Radiator Overflow Bottle Dodge Intrepid...
How to Remove Dodge Intrepid Radiator eHow

Jun 26, 2016 | Cars & Trucks

1 Answer

I have a 2005 dodge status 2.7l and my whole passenger side floorboard stays soaking wet and on top of that the radiator runs hot unless I have the AC ON ...my temp gauge never passes the half mark


2002 Dodge Stratus: 2.7L..drivers side floorboards..it rains ...

www.justanswer.com > Dodge
I have a 2002 Dodge Stratus with a 2.7L engine. ... trunk area that the water ends up showing up on the front floor boards also if the vehical has a sun roof check ...

2000 Dodge Stratus Water Leaking: 2 Complaints

www.carcomplaints.com/Dodge/Stratus/2000/body.../water_leaking.shtm...
The 2000 Dodge Stratus has 2 complaints for water leaking. ... 2007 · 2006 · 2005 · 2004 · 2003 · 2002 · 2001 · 1999 · 1998 · 1997 · 1996 · 1995 ... Intrepid & other Chrysler sedans are infamous for oil sludge problems with the 2.7L V6 engine. ... There would be between 4 and 6 inches of water on the passenger floor board ...
2004 Dodge Stratus overheating, I've tried everything, - Car ...www.automotiveforums.com > ... > Dodge > StratusOct 31, 2009 - I have a 2004 Dodge Stratus with 150k mi on it. ... the hood and touch the hose that connect the radiator to the thermostat. It's hot? .... it uses exhaust cam phasers for internal EGR control. not sure about the 2.7L V6 or 3.0L.Why is water/coolant in coolant jug bubbling and caus
The thermostat may be blocked open; that could be a reason for the gauge position.

Dec 09, 2015 | Dodge Cars & Trucks

1 Answer

I need torque spec. For camshaft pulley bolt on 2004 dodge stratus


2004 dodge stratus 2.7 L v6 200i--2006 engine identification is EER has twin cam shafts and the bolts that hold the sprockets to the cam shaft are at 21 ft/lbs
there are 4 bolts for each cam (autodata publication page 375)
if this is not your engine then comment as to how many cam shafts it has as there are many different settings for different dodge engines

Oct 26, 2015 | Dodge Cars & Trucks

1 Answer

2000 dodge intrepid 3.2 ltr v6 won't start.... turns over. It has a new alternator, new fuel pump & new plugs. Spark is coming from #2 coil & had each coil tested. Yet wires are not sending sparks...


Hello he forgives I have an intrepid shape 1998 with engine 2.7 he still has my serious question an engine 3.2 deu an intrepid 2001 graces my mail is. s_chavezcardiel@hotmail.com

Jul 14, 2010 | 2000 Dodge Intrepid

1 Answer

How to change cam positiom sensor in 2000 dodge


The cam position sensor on the 2.7 engine is on the
driver side of your engine, right in the front of the head. there's a 10mm bolt. undo the bolt and pull it straight out. push the new one into the hole, and hold pressure on it until it's bolted back in.

If you have the 3.5, the cam position sensor is located on top of the timing cover. I just unbolt the upper intake just enough to lift it up a little. unbolt the cam sensor, pull it out and install the new one keeping pressure on it until it's bolted in.

I hope this helps

May 13, 2010 | 2000 Dodge Intrepid

2 Answers

Where is the camshaft position sensor located on a 2000 Dodge Intrepid?


If it is a 3.5 it is located on the front of the engine on the drivers side under the plenum.

Oct 23, 2009 | 2000 Dodge Intrepid

1 Answer

Where is the cam sensor located for 2000 dodge intrepid


As you are looking at the engine, it'as on the right front of the valve cover, very easy to change.

Aug 04, 2009 | 2000 Dodge Intrepid

2 Answers

DODGE INTREPID


They are pretty reliable. Transmissions sometimes have problems and battery changing, etc isnt easy. I have had 2 concordes and 2 intrepids, as well as a van from chrysler and for the most part they are fine except the transmissions. have had to change the transmission in 2 of the cars and the van (which takes a different one). Engines are good if taken care of. Rick

Jul 04, 2009 | 2000 Dodge Intrepid

1 Answer

My 2000 dodge intrepid will not start, just goes around and around.


YOU MOST LIKE HAVE VALVES CONTACTING PISTONS AND NOT ALLOWING ENGINE ROTATION..A 2.7 ENGINE IS AN INTERFERENCE ENGINE AND IF GOES OUT OF TIME WILL DAMAGE VALVES AND/OR PISTONS

May 31, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...