Question about 2001 Lincoln Navigator

1 Answer

My number 8 cylinder is miss firing, how do i go about gettin to it an fixin that problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 8,589 Answers

Please see my tip at http://www.fixya.com/cars/r6715318-causes_gasoline_engine_misfires . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

In your specific case, you can swap the coil/wire with another set, but first pull the plug and make sure it's OK. Next, swap the coil. If the misfire moves to the other cylinder, the coil/wire is bad. I'm assuming you have access to a scanner and have extracted a code P0308. The other cylinders, when misfiring, will yield a similar code where the last digit in the code is the cylinder number. If the plug and coil/wire is good, check compression. Please let me know if you have questions.


my number 8 cylinder is - jturcotte_153.gif

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missfire on cylinder 8 on bmw 545


move the ignition coil to another cylinder and see if the miss fire moves. If so replace that ignition coil. If the miss fire stays on that cylinder it is more likely the fuel injector. Was their carbon on the spark plugs when you removed them? This is indicative that the fuel injector is gummed up.

Jan 18, 2013 | Cars & Trucks

1 Answer

Miss fire on cylinder b


Cylinder B?? No that is cylinder bank B, the cylinders are numbered 1-8

Oct 17, 2012 | 2005 Dodge Ram 1500

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

I need to know the firing order of my 1995 limited jeep grand cherokeemy spark plug wires are missing i have new wires i just don't know the firing order


For the 1995 Jeep Grand Cherokee:
I do not know if you have the 4.0L In-Line (Straight) 6-Cylinder or the 5.2L V8; however I have included bothe below.

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
|..6..|
|..5..|
|..4..|
|..3..|
|..2..|
|..1..|
(front)
Distributor:
...(back)
....5...3.(+)-screw
1...........6
(+)4...2
...(front)

For the 5.2L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back)......
|..8..|........|..7..|
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
.......(front)
Distributor:
.......(back)
.........3
...4.........6
8...............5
...1.........7
.........2
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 21, 2010 | 1995 Jeep Grand Cherokee

2 Answers

Miss fire on #3cyl. where is #3 located


Number 3 is the 3rd plug back on the passenger side. Coils are notorious for going bad, I would recommend replacing the spark plugs, while you are there. Use Auto Lite, or Motorcraft Platinum Spark plugs only.

May 09, 2010 | 1996 Mercury Grand Marquis

2 Answers

Spark plug wiring diagram for 98 tahoe car is missing need to know which wire goes were


You didn't post your engine size so please pick the applicable diagram:


37926a4.gif
1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise


8c292b0.gif
1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise



30ced3d.gif
4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise


de67664.gif
4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)


bf80c63.gif
5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Feb 14, 2010 | 1998 Chevrolet Tahoe

1 Answer

Miss fire cyc 8 changed plug and coil pack scan tool still says miss fire number 8


check compression, then fuel injector. or vac leak. what kind of scan tool. very few will give live misfire data. you are sure you replaced number 8, drivers side rear?

Oct 21, 2009 | 2001 Lincoln Navigator

5 Answers

Where's the number one cylinder on a ford f-150 truck?


Select your Engine for Ford Pick-Ups/Expedition/Navigator 1997-2000...

cf75b46.jpg

Ford 4.2L Engine Firing order: 1-4-2-5-3-6 Distributorless ignition system

d401c97.jpg

Ford 4.6L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system

aa812aa.jpg

Ford 5.4L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system (one coil on each cylinder)

5d2d834.jpg

Ford 5.8L Engine Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise

7af8e86.jpg

Ford 6.8L Engine Firing order: 1-6-5-10-2-7-3-8-4-9 Distributorless ignition system (one coil on each cylinder)

3e29322.jpg

7.3L Diesel engine injection order: 1-2-7-3-4-5-6-8

0d6e880.jpg

Ford 7.5L Engine Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise


I hope help you (remember rated this help) good luck.

Sep 14, 2009 | 2000 Ford F150 Flareside SuperCab

2 Answers

Miss fire coil number 8 and coil A


Did you replace the boot that connected to the coil the touches the spark plug. If you didn't then the boot could be bad and instead of the park always going to the spark plug it hits outside the boot on the head. Good Luck

Dec 09, 2008 | 2005 Lincoln LS

Not finding what you are looking for?
2001 Lincoln Navigator Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...