Question about 2004 Hyundai XG350

Open Question

How do i align the timing marks for a 03 hyundai xg350l

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

daves944
  • 1050 Answers

SOURCE: how do i align timing marks on a 93 hyundai sonata

Hopefully this picture comes through, if not let me know and I can zoom in. Be sure to remove the auto tensioner, compress it slowly in a vice and put a pin through holding holes until the belt is mounted properly, replace it and pull the pin.432732a.jpg

Posted on Mar 26, 2009

  • 566 Answers

SOURCE: front wheel alignment

thanks for your reply/update the reason for front tyres wearing as you describe would suggest the steering tracking is wrong and for some reason ?the tyre wear on inner isindication the track is toeing out too much ? this fault could be ? simple adjustment req'd however dependand on make of tyres has to be considered when tracking as to whether they toe in or out or straight ahead ? also front wheel drive ? there could be other factors b4 tracking is adjusted such as steering joints wear ? or damage ? also suspension ? as i mentioned best to visit a good tyre depot and let them investigate while you wait and give you a reportas to fault normally free in uk if it is simply tracking req's re adjust then they can do it and charge for the adjusting not expensive and they may also recommend switching wheels from rear to front providing tread are good ? hope this helps best wishes

Posted on Mar 31, 2009

  • 24 Answers

SOURCE: 2005 Hyundai XG350L Fuel Filter

Hi there, 
If you can get under the car just head to the petrol tank and look for the lines running to and from the tank,
There should be several thin copper looking metal tubes running from the tank to the engine bay,
Generally somehwere along that line should be the fuel canister that should look almost the same as your new one, 
Its then a simple process of unscrewing the old one and screwing in the new one, Be aware not to use any sort of flame light ie lighter when under there as fuel will run out when you remove the old one. If its not under ther then it will be mounted in the engine bayas before just follow those tubes.
You may need to turn the igition on and off a few times once installed to prime the lines if the car does not automatically do this.
If it still wont start try pumping the gas/accelerator once or twice,
Be carefull not to flood the car and you should be away.
Hope this helps
Cheers
Steve

Posted on Apr 03, 2009

  • 12 Answers

SOURCE: Correct way to align timing marks

hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

Posted on May 28, 2009

c17hydro
  • 2984 Answers

SOURCE: I need 2004 Hyundai XG350L Service/repair Manual

3.5L Engine

Remove or disconnect the following:

  1. Negative battery cable
  • Engine coolant
  • Water pump pulley bolts
  • Alternator bolt, loosen only
  • Water pump pulley and drive belts
  • Crankshaft pulley
  • Timing belt cover(s)
  1. Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
  2. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
  3. Mark the timing belt with an arrow showing direction of rotation.
  4. Remove the timing belt.
  5. If defective, remove the timing belt tensioner.

9767b45.gif
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine

To install:
  1. If necessary, install the timing belt tensioner.
  2. Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
  3. Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
  4. Align the timing marks of the camshaft and crankshaft sprockets.
  5. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
  6. Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
  7. Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
  8. Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
  9. Turn the crankshaft two turns clockwise.
  10. Readjust the sprocket timing marks and tighten the tensioner bolts.
  11. Install the timing belt covers.
  12. Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
  13. Install or connect the following:
    • Timing belt cover(s)
    • Crankshaft pulley
    • A/C compressor belt
    • Water pump pulley
    • V belt
    • Negative battery cable
    • Engine with coolant

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TIMING MARKS ON 2003 HYUNDAI XG350L


Follow the link to the timing belt diagrams, all of the needed info is there, scroll past the serpentine belt diagras, T belt is lower down on the page. https://www.2carpros.com/diagrams/hyundai/xg350/2003

Oct 17, 2016 | Hyundai Cars & Trucks

1 Answer

Location of fuel pump on xg350l 03 3.5l


Hi Charles,here's a repair guide on your fuel pump,it's in the tank. Repair Guides Gasoline Fuel Injection Systems Fuel Pump AutoZone com I also would recommend using a oem fuel pump,don't have to splice wires .

Oct 23, 2014 | Hyundai Motor 2003 XG350

1 Answer

Timing belt 2001 hyundai xg300


No you have 8 cam timing marks on that engine then the oil and crank timing marks . Once you get the ones on the cams aligned then you have to lock the cams in place you have timing marks on the belt drive pulleys and on the back of the cam gears that have to be in perfect alignment . you have 4 cams that have to be in perfect alignment and the rear head is the hardest to get right. Then you have to turn it over by hand socket wrench on crank at least 21 times then recheck all the timing mark to make sure that they are still all in alignment. Buddy it's worth the money to have it done at the dealership. I kid you not because if they do it wrong they have to buy all the new valves and head gaskets oil and coolant to fix it and not you . Retired Hyundai tech.

Jul 18, 2014 | 2001 Hyundai XG300

2 Answers

Need the timing marks for 2001 hyundai tiburon


1.5L And 1.6L Engines

a826891.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L DOHC engines


4e7384e.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines



1.5L Engines

238c1f1.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L DOHC engines


b1c71ee.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines


c200f83.jpg

Fig. Proper pulley alignment for timing belt installation at TDC-Hyundai 1.5L SOHC engines, 1.6L similar



1.8L (VIN M) And 2.0L (VIN F) Engines

656db91.jpg

Fig. Proper alignment of the timing belt alignment marks for belt removal and installation-Hyundai 1.8L and 2.0L (VIN F) engines



2.0L (VIN P) Engines

7208166.jpg

Fig. Oil pump and crankshaft inner timing belt sprocket alignment marks-Hyundai 2.0L (VIN P) engines


7080ea8.jpg

Fig. Timing belt sprocket alignment mark locations and positioning for belt removal and installation-Hyundai 2.0L (VIN P) engines



3.0L (VIN G)

3b377fb.jpg

Fig. Installation of the timing belt-3.0L (VIN G) engine




7b32092.jpg


Fig. Timing belt sprocket alignment mark positioning for belt removal and installation-Hyundai 3.0L engine


Hope this helped (remember comment and rated this post).

Apr 13, 2010 | 2001 Hyundai Tiburon

1 Answer

Timing belt broke on hyundai accent how do i replace it and the timing marks


1st you may want make sure that's not an interference engine. if it is then chances are the valves are bend in the head. changing the timing belt probably won't help then. If its not an interference head, then you would need a timing mark diagram which can be found online. be very careful that all marks are aligned. when finshed installing the timing belt, rotate engine by hand twice and re-align marks before putting the rest back together! hyundai should be able to tell u if the engine runs interference or not.

Mar 29, 2010 | Hyundai Motor 1995 Accent

1 Answer

Timing marks setting Hyundai Lantra


Installation
Ensure timing marks aligned [6] & [7] . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt [8] . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned [6] . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt [2] . Tightening torque: 170-180 Nm

7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top


Mar 21, 2010 | Hyundai Motor 1996 Elantra

2 Answers

I need 2004 Hyundai XG350L Service/repair Manual


3.5L Engine

Remove or disconnect the following:
  1. Negative battery cable
  • Engine coolant
  • Water pump pulley bolts
  • Alternator bolt, loosen only
  • Water pump pulley and drive belts
  • Crankshaft pulley
  • Timing belt cover(s)
  1. Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
  2. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
  3. Mark the timing belt with an arrow showing direction of rotation.
  4. Remove the timing belt.
  5. If defective, remove the timing belt tensioner.

9767b45.gif
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine

To install:
  1. If necessary, install the timing belt tensioner.
  2. Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
  3. Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
  4. Align the timing marks of the camshaft and crankshaft sprockets.
  5. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
  6. Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
  7. Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
  8. Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
  9. Turn the crankshaft two turns clockwise.
  10. Readjust the sprocket timing marks and tighten the tensioner bolts.
  11. Install the timing belt covers.
  12. Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
  13. Install or connect the following:
    • Timing belt cover(s)
    • Crankshaft pulley
    • A/C compressor belt
    • Water pump pulley
    • V belt
    • Negative battery cable
    • Engine with coolant

Feb 10, 2010 | 2004 Hyundai XG350

1 Answer

Set harmonic balancer to top dead centre,set cams to timing marks,engine will not start but turns over. Hyundai Terracan 2002


hi from uk assume you have renewed c/belt and balance shaft timing belt? if so? and sure your timing marks on cams and the c/shaftcog are correct ? the oil pump also correctly aligned with marks? and the balance shaft gear also has time marking ? want to run thro how and which marks you have aligned and at TDC No1 all belt/s have to be aligned ??

Dec 27, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Fuse box layout


First of all, Hyundai did not produce the XG350 until 2002. You wrote 2001 Hyundai XG350L. The engine in the 2001 is 3.0 (XG300). Cant help you.

May 09, 2009 | Hyundai XG350 Cars & Trucks

Not finding what you are looking for?
2004 Hyundai XG350 Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...