Question about Chevrolet Avalanche

Open Question

2004 chevy avalanche will not go into park. Shifter gets into correct position but will not get past reverse. Is it electrical or what is the problem?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

clesh01
  • 14 Answers

SOURCE: chevy avalanche transmission trouble

its usally the other way around,theres a broken hard part in your tranny.it wont let the pump ingage to releive pressure fom clutches,in turn wont go into drive.sorry, but thats going to be expensive.get extended warrenty and then turn it in before contacting the dealer.

Posted on Jan 09, 2009

  • 16 Answers

SOURCE: 2004 Jaguar XJR Shifter stuck in park position

the shifter cable is on the lift side of the transmission, make sure it is bolted to the trnsmission

Posted on Jan 30, 2009

  • 195 Answers

SOURCE: chevy avalanche transmission problems

Hello;
Are you getting the check engine light? If so the electronics may have gone out. You may not need a rebuild but you won't know till you pull the oil pan on the transmission and inspect the contents. You may also have lost the neutral safety switch. It is mounted on the drivers side of the transmission. Check those out first and let me know what codes you get.
For Ponchoboy; the clunking and hissing you hear are teminal root causes. Drop the oil pan and if it has a lot of filings and metal it is time for a rebuild.
Hope this helps; Rate me highly;
Rich
RPM Northwest

Posted on Feb 09, 2009

  • 100 Answers

SOURCE: Gear shifter sticking (auto) from Park to reverse and vice versa.

you need to have the shifting cable lubricated or replaced.

Posted on Apr 26, 2009

shop510
  • 90 Answers

SOURCE: I parked my 2003 Chevy Trailblazer in my driveway

If it is floor shift it has a soloind under the cover not to hard to remove, you have to memove the whole thing bolt in front cupholder and inside armrest storage. once it has removed there is a soloind in there that mounts on the shifter. this goes bad alot. Push the button on the silver soloind button this will release it into gear. Hope this helps. ( Usually he black soloind goes bad)

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Chevy Avalanche won't start (incorrect gear indicator)


PRNDL Display
The instrument panel cluster (IPC) displays the selected gear position as determined by the powertrain control module (PCM). The IPC receives a class 2 message from the PCM indicating the gear position. The PRNDL display blanks if:
• The PCM detects a malfunction in the transmission range switch circuit.
• The IPC receives a class 2 message indicating the park position and the column park switch indicates a position other than park, open input.
• The IPC detects a loss of class 2 communications with the PCM.

Could be the transmission range sensor . Testing would need to be done , hooking up a scan tool ! Doing electrical testing etc...

Jul 06, 2017 | 2003 Chevrolet Avalanche

1 Answer

2007 chevy avalanche wont engage D 1 or 2


prey its electrical but unfortunately sounds like you, my friend have a blown transmission...get it towed to aamco to be sure but thats the exact same thing that happened to one of my cars. $1000 and 30+ hours of my time (after it shipped) later, i had a used transmission, and personally installed it. its often times cheaper than getting the current one fixed. good luck man.

Oct 26, 2012 | 2004 Chevrolet Avalanche

1 Answer

CAN NOT MOVE SHIFTER TO ANOTHER POSITION


Changing the switch behind the brake pedal will solve your problem,you can try to clean it with any electrical contact cleaner, I had the same problem and it worked for some time, then I had to change it . I wish you luck.

Dec 08, 2011 | 2004 Volkswagen Jetta

2 Answers

My 2004 s type is stuck in reverse\r\nthe gear


I am having the same problem with my 2004 XJ8. The shifter is in the park position but the reverse light is on. The car thinks it is reverse despite the shifter postion at park. I am unable to get it out of park position or start the engine.

Jun 15, 2010 | 2004 Jaguar XJR-Series

1 Answer

Locked Ignition but steering wheel free


Push gear selector up past park and it should loosen up, or press hard on the brake pedal. Shifter up past park usually loosens it up. Common GM problem.

Nov 19, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

A/T Shifter very hard to move from position to position


The shifter rod in the trans valve body is siezed

Jul 05, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Sporatic transmission problem in reverse


check over all enigne mounts
check select cable /linkages
adjust the safety switch

Apr 10, 2017 | 2004 Chevrolet Avalanche

2 Answers

Need to locate backup light switch on 1988 chevy 1500


I had the same problem. My backup lights wouldn't come on in when I put the auto. trans. shifter into the Reverse position. They WOULD come on briefly as I moved the shifter from Park position into Reverse, but would go off again when the shifter reached the Reverse detent. I got the solution from the Haynes service manual, in which the relevant switch is referred to as something like the neutral safety switch. Check on top of the steering column close to the firewall. Set the parking brake, then move the auto. trans. shifter into Neutral position. Get under the dash and rotate the neutral safety switch clockwise as far as it will go. Then move the shifter into the Park position, and your switch should be set. If the backup lights don't come on now when the shifter is put into Reverse position with the ignition switch 'on', there may be another problem.

Feb 10, 2009 | 1988 Chevrolet C1500

1 Answer

2004 Jaguar XJR Shifter stuck in park position


the shifter cable is on the lift side of the transmission, make sure it is bolted to the trnsmission

Dec 03, 2008 | 2005 Jaguar Vanden Plas

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...