Question about 1998 Acura CL

1 Answer

I installed a new radio in my 1998 acura cl but when i put the dash back in place my turning signals and hazards stopped working.....what's wrong and how can i fix it?.....thanks in advance for your help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This means that the plug for the hazard switch is not pushed in all the way. The turn signals will not work when the emergency flashers are disconnected.

I'm not going to pretend that I'm the smartest guy on the block and just knew this. I actually had the center console apart on my 99 3.0CL and had to drive it with everything disconnected. The first thing I noticed was that the turn signals did not work.

Posted on Nov 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My stereo is saying err3 and i dont know the code to my 98 acura, can someone please help me?


This is due to the anti-theft in the radio. Open the fuse box under the hood, pull two fuses; radio and radio back-up, put the 2 fuses back in. Turn the radio ON, it should ask for your code. Pull out the ash tray and see if you have the 5 digit code there. Enter the code and the radio should now work.

Jun 20, 2011 | 1998 Acura CL

1 Answer

I replaced the battery on my 1998 acura cl 2.2 and now the radio does work and is asking for a code.. where do I find this code?


You have to tear into your center panel (guides online, not too hard), and remove the stereo. On the back of the stereo unit itself you will find the code. Then write it elsewhere!

Sep 02, 2010 | 1998 Acura CL

1 Answer

My stock radio for my 1998 acura cl says P-E 0 everytime i try to play a CD. Any possible solutions?


P.E.O meens program ,error 0 which basic meens your laser is not working time to replace your radio or have it repaired if you are not into a lot of cables and cutting them to install an after market radio go Crutchfield they have the wireing harness so the job is a breeze

Apr 03, 2010 | 1998 Acura CL

2 Answers

Lost code for my 1998 acura cl


You have to call the dealer and give them your vin# they tell You P.S. DO NOT TRY AND PUT IN A CODE THREE STRIKES AND YOU OUT. BUT I CAN FIX THAT TOO ONCE YOU GET YOUR CODE . I hope that helped.

Jun 17, 2009 | 1998 Acura CL

1 Answer

Same problem listed hear, dead radio doesn't ask for code


you probably entered the code wrong more than 3 times i Dont know But if you Did you have to go under the hood and reset the back fuse for the radio in the passanger side take it out for a few minutes and there you go punch back the right code . Hope this helps!
Kevlarr-Acura 99. cl 3.0

Jun 06, 2009 | 1998 Acura CL

3 Answers

1998 3.0 Acura CL Shut off electronically


There is a known issue with the ignition switch on the 98 Acura CL 3.0. The ignition was recalled by the manufacturer. This happened to my 98 CL as well. Since it was a recall, Acura may replace the ignition switch for you at no cost, not sure though as they announced the recall in 2003 I believe.

May 27, 2009 | 1998 Acura CL

2 Answers

Turn signals dont work 97 Geo Metro


we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

6 Answers

Radio error on Acura


Your radio isn't broken. Obviously my answer is months late, but i'll throw my 2 cents in here. I drive the same exact car, and had the same exact problem. The reason your code didn't work is probably b/c you got locked out because of putting in the wrong code too many times. If you don't put it in by the third time, you get locked out and need to remove your car battery for a few seconds than try again. The code is printed on the back of your ash tray, just a little fyi.

May 23, 2008 | 1998 Acura CL

Not finding what you are looking for?
1998 Acura CL Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...