Question about 1996 Ford Taurus

1 Answer

How do i car door panels safely - 1996 Ford Taurus

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,984 Answers

  1. Remove the cover behind the inside door handle.
  2. Remove the screw from the bottom of the pull cup retaining the front door trim panel to the front door.
  3. Remove the two screws retaining the sail panel/speaker grille assembly and remove the panel/grille from the door.
  4. Remove the three screws retaining the front door trim panel to the front door.

Do not attempt to remove more than one pushpin at a time.

  1. Use a suitable tool to remove the pushpins from the door.
  2. Carefully lift the door panel away from the door.
  3. Detach the electrical connectors as necessary and remove the panel from the door.

To install:

  1. Installation is the reverse of removal.
Door Panel

This procedure applies to both the front and rear door panels.


// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 30; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; how do i car door - c17hydro_23.gif

Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs


Remove the pull cup retaining screw cover and...



c17hydro_25.gif

... remove the retaining screw from the cup and lift the cup straight up out of the door panel



c17hydro_26.gif

Remove the two sail panel/speaker grille retaining screws and...


how do i car door - c17hydro_27.gifimg src="http://i.fixya.net/uploads/images/c17hydro_27.gif" alt="c17hydro_27.gif" class="h_mi" />

... remove the panel/grille from the dohow do i car door - c17hydro_28.gifbr />


c17hydro_28.gif

The door panel is retained to the doorhow do i car door - c17hydro_29.gifg clips



c17hydro_29.gif

Carefully how do i car door - c17hydro_30.gifanel off of the door and...



c17hydro_30.gif

... detach the electrical connectors from the switches and remove the panel from the vehicle

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I safely remove the diver's side rear door panel on a 2010 Hundai Elantra wihout damaging?


Using an engine puller (hydraulic crane) lift slightly on the door. Remove bolts and wire connectors. Door is now hanging on the engine puller hoist.

Aug 16, 2013 | 2010 Hyundai Elantra Touring

1 Answer

How to remove passanger side door panel 2012 auston martin db9


Its just fitted with few screws and hidden lock clips.The clips are very delicate and can break easily.But no worry,the clips are easily available.
on some vehicle models these screws are hidden.Once the panel is loose, don't just pull it out,there are few wire connectors connected,first disconnect the connector plug,then lift the panel out and keep in safe place for re-installing.
For your help,there are few very helpful similar help links with diagrams and solutions to make your task easy.Click the link below:----How to Remove Door Panels on Acura Integra
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html

-------How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

---------

Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html
----------How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
---------------
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html
------- Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html
-------------- 2009 Hummer H2 Door Panel Removal http://schematicsdiagram.blogspot.in/2012/07/2009-hummer-h2-door-panel-removal.html
-----------how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html
------------How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html
-------------
how to remove rear window inner panel on Hyundai Elantra?
http://technoanswers.blogspot.com/2011/05/how-to-remove-rear-window-inner-panel.html
------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
------------
These details will help.
Thanks,.

Nov 23, 2012 | Cars & Trucks

1 Answer

How do I remove the driver door panel on a 2002 cadillac deville


DOOR PANEL REMOVAL



Its just fitted with few screws and hidden lock clips. The clips are very delicate and can break easily. But no worry, the clips are easily available.

On some vehicle models these screws are hidden. Once the panel is loose, don't just pull it out, there are few wire connectors connected, first disconnect the connector plug, then lift the panel out and keep in safe place for re-installing.


For your help, there are few very helpful similar help links with diagrams and solutions to make your task easy. Click the link below:----


How to Remove Door Panels on Acura Integra
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html

-------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

---------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

----------
How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html ---------------
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html

-------
Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html

--------------
2009 Hummer H2 Door Panel Removal

http://schematicsdiagram.blogspot.in/2012/07/2009-hummer-h2-door-panel-removal.html

-----------

how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html

------------

How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

-------------
how to remove rear window inner panel on Hyundai Elantra?
http://technoanswers.blogspot.com/2011/05/how-to-remove-rear-window-inner-panel.html

------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html

------------
These details will help.

Thanks,.

Nov 23, 2012 | 2002 Cadillac Deville

1 Answer

1996 Mercury Mystique Window


Here are the instructions:
    • Gently remove the door panel of your Contour, ensuring that you don't break the three door clips that hold it on. As you pull the panel from the door, support the panel from below. This will ensure that none of the wiring inside the door is damaged. Release the wiring from the components inside the door, including the power window mechanism, power lock mechanism (if equipped) and the stereo speaker. Place the door panel in a safe area with the clips so they are accessible when you are ready to replace them.
    • 2Remove the window glass by sliding it up and out of the door. Support the glass from the bottom so it doesn't drop and break. Window glass for a Contour can cost around $150 to replace. After you remove the glass, put it in a safe place. You may want to wrap it in old towels or blankets to protect it until you are ready to reinstall it.
    • 3
    • Unplug the wires from your Contour's window motor, and remove the screws from the window motor and regulator. Remove the power window motor and regulator from your Contour to make way for the new parts.
    • 4Install the new window regulator into the door, and replace the screws that held them in place.
    • 5Replace the window glass into the door, and connect it to your Contour's power window motor and regulator assembly.
    • 6Replace the door panel. Reconnect the wiring for the power window and power lock controls, and replace each clip that connects the panel to the door.

Jul 26, 2012 | 1996 Mercury Mystique

1 Answer

How do you replace front drivers side window motor 1997 mercury mystique


The motor and regulator need to come out here is how to do that.

Instructions
    • 1Gently remove the door panel of your Contour, ensuring that you don't break the three door clips that hold it on. As you pull the panel from the door, support the panel from below. This will ensure that none of the wiring inside the door is damaged. Release the wiring from the components inside the door, including the power window mechanism, power lock mechanism (if equipped) and the stereo speaker. Place the door panel in a safe area with the clips so they are accessible when you are ready to replace them.
    • 2Remove the window glass by sliding it up and out of the door. Support the glass from the bottom so it doesn't drop and break. Window glass for a Contour can cost around $150 to replace. After you remove the glass, put it in a safe place. You may want to wrap it in old towels or blankets to protect it until you are ready to reinstall it.
    • Sponsored Links
    • 3Unplug the wires from your Contour's window motor, and remove the screws from the window motor and regulator. Remove the power window motor and regulator from your Contour to make way for the new parts.
    • 4Install the new window regulator into the door, and replace the screws that held them in place.
    • 5Replace the window glass into the door, and connect it to your Contour's power window motor and regulator assembly.
    • 6Replace the door panel. Reconnect the wiring for the power window and power lock controls, and replace each clip that connects the panel to the door.

Jul 01, 2012 | 1998 Mercury Mystique

2 Answers

The door unlocks but the latch wont open the door. what can i do to fix it?


You'll need to remove the inner door panel, usually the clip that holds the door handle rod or to the latch has broke and the rod becomes disconnected.

May 20, 2010 | 1998 GMC Jimmy

1 Answer

How do i get door panel off of driver side door to fix window back on track


remove all screws(phillips) remove the power window/locks switches carefully, all along the door panel edges there are clips that hold the panel onto the inside door skin these must be carefully pried as to not break them, they are plastic... have a screw # 2 phillips driver, flat bladed also to pry panel etc. and a pair of needle nose pliers to remove any clips that stay stuck in the door skin once the panel is removed. Look over the panel carefully and be sure you remove anything that ressembles a plastic caq/cover to ensure safe removal. Go slow do it right the first time!!! Good luck. John

May 06, 2010 | 1998 Chevrolet Malibu

1 Answer

How to install door window in 1993 cadillac deville


The interior door panel needs to come off; the panel comes off by pushing it up from the bottom. Make sure you remove the window, seat, and mirror control panels first and pop off the clip that holds the plastic corner sail panel by the mirror. Also CARFULLY remove the pastic panel with the power lock controls and unplug the wiring harness. Pop off the two plastic covers on either end of the door-pull handle and remove the screws with philips screw driver . After doing this, CARFULLY lift from the bottom. Once the panel as come off, CARFULLY pull the panel far enough away from the door to pull the two speaker connectors off. Put the panel someplace safe, along with the power controls. In order to get to the power window equipment you need to pull back the black rubber sound absorber panel. It is stuck on with a black, gummy, tar like substance. Again, be careful with this as well.

Feb 24, 2009 | 1991 Cadillac DeVille

Not finding what you are looking for?
1996 Ford Taurus Logo

8,060 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...