Question about 2007 Nissan Versa 1.8 Sl Hatchback
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2006 nissan murano headlight out
Bulb can be replaced. You can buy at Walmart or your local parts store. I recommend replacing both. They are rated for the same amount of run hours and will usually fail within the same month.
You can also buy from this link.
Posted on Jan 16, 2009
Open up the hood, and go in behind the fixture where the light is located. Sometimes there is an access panel on top. Open it and reach down inside and grab the bulb’s socket. Twist the socket a quarter turn counter clockwise, and pull out the socket. Grab the bulb, and pull it straight out. To replace the new bulb, never touch it with your bare fingers, as this will greatly shorten the bulb's life, if it even work's at all. Use a tissue or something else in that order to handle the new bulb. Push the new bulb into the socket, put the socket back into the housing, and twist a quarter turn clockwise to secure the socket into the fix.Seems that you have to remove the coolant bottle(two screws), and also the unscrew the washer fluid bottle, after that you can reach the socket that holds the bulb. There is a wire that holds the bulb in. if you loosen the screw you can tip up the wire and be careful to leave it in place...also the long side of the wire seems to connect to ground wire for the light...
Posted on Oct 14, 2009
open the hood the light is a bulb not the hole thing. turn ring pull the bulb out. replace
Posted on Dec 06, 2009
Testimonial: "ya i got it. thanks sooo much "
Remove the plug and the boot. There is a clip that hinges on the outside (towards the fender) with 2 ends on the inside (toward the radiator). With your finger and thumb, push the ends to open the clip and swing it out of the way. The bulb comes right out. I wish someone had answered this earlier as I just learned this on my own. OK, so now you know! When you have the solution to something, SHARE IT!
Posted on Dec 25, 2009
Hi El, Since it's on the passenger side you'll need to remove the air filter housing & filter to get to the housing for the bulbs. Right behind that bulb housing there are two rubber coated caps (those caps are where the bulbs are located) that you'll need to remove. They can be tough to remove so it should be ok to use a flat head screwdriver to GENTLY pry the caps. Just make sure you are GENTLE with it and once it is loose use your hand to turn it counterclockwise about 1/4 turn. Gently pull it out then unplug the wire harness to it. **** IMPORTANT*** Like most headlight bulbs, DO NOT TOUCH THE NEW BULB WITH YOUR BARE HANDS. Halogens are ruined by our natural oils and it will make your new bulb burn out extra fast. Also: The outside bulb should be the LOW BEAM and the inside should be the HIGH BEAM. Let me know if you have any other questions and I'll be happy to help.
Posted on Apr 23, 2010
Tips for a great answer:
Oct 04, 2015 | 2009 Nissan Versa
Jan 11, 2014 | 2007 Nissan Versa 1.8 Sl Hatchback
Jan 14, 2013 | 2008 Nissan Versa
Dec 27, 2010 | Nissan Versa Cars & Trucks
Jan 26, 2010 | 2003 Nissan Altima
Dec 06, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback
Dec 02, 2008 | 1988 Nissan 300ZX
Nov 18, 2008 | 2006 Nissan Murano
417 people viewed this question
Usually answered in minutes!