Question about Ford F

1 Answer

Ford Falcon AU, How do I release the power steering belt In the choose a model couldn't find ford falcon so just picked F so this would go through

Posted by on

  • 1 more comment 
  • johnsongumnu Nov 13, 2010

    Ford Falcon 1999 4 litre engine

  • johnsongumnu Nov 13, 2010

    I know it is the belt tensioner, but how do you release the belt

  • johnsongumnu Nov 13, 2010

    Okay, got it, thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

What year and engine size?

Posted on Nov 13, 2010

  • 1 more comment 
  • GetMeOttaHere Nov 13, 2010

    I thought so, I am in the US, your vehicle was made by Ford for the Australia market. I do not have this info, but usually the belts are loosened from the tension pulley.

  • GetMeOttaHere Nov 13, 2010

    Place a socket on the nut that holds the tensioner and turn it counter clock wise to release the pressure on the belt.

  • GetMeOttaHere Nov 13, 2010

    Your welcome.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Iut just bought a ford au 1999 with a remote but tonight I cannot open the car door..


if genuine au remote.. check the fob battery

could be a faulty door lock actuator or module fault

you will find the free AU falcon repair manual handy
Ford Falcon AU 1998 2002 Workshop Manuals Factory Service Manuals

Nov 24, 2016 | Ford Cars & Trucks

1 Answer

What is fuse layout for a 99 Ford falcon forte


AU
chasing fuses may be more issues

might be useful to have the full AU falcon repair manual


Ford Falcon AU 1998 2002 Workshop Manuals Factory Service Manuals

Nov 03, 2016 | Ford Cars & Trucks

1 Answer

Red fanbelt light on dashboard on AU Ford Falcon. If it comes on what does it mean??


have a look under the hood as it probably means that the belt is broken, needs replacing or needs adjustment.

Dec 14, 2014 | 1999 Ford Falcon

1 Answer

Placing column onto replaced rack au falcon


check on that guide must be center at all

Feb 10, 2014 | Ford Cars & Trucks

2 Answers

I need a manual for a 2004 Ford Falcon BA Futura


Hello,
Please kindly follow the link below to get the manual you requsted for;
http://fitripdf.com/books/ba-gt-ford-falcon-service-manual-2.html


thank you for using fixya

Dec 19, 2010 | Ford Futura Cars & Trucks

1 Answer

Timing belt on el ford falcon


Just put it on tensioner arm does the rest use a 3/8 drive ratchet

Apr 27, 2009 | Ford Fairmont Cars & Trucks

1 Answer

How do you replace a driving belt on a 1999 AU ford falcon


start by unplugin the electric fans then remove the two 10mm bolts holding them in, the bottom of the fans are held in by a slot that they sit in so after you remove 2 bolts just lift the fans out. then you will see a tensioner i think it has 3/8 drive square hole in it( could be 1/2'' drive) just pull it down with a long bar with a 3/8 end on it to release the tension, while doing that slide the belt of,. if your car doesnt have a picture diaghram on the under side of the bonnet for drive belt routing draw a picture incorprating all the pulleys an how the belt goes around them. once the belt is of put the new one on exept over the power steering pump pulley, then pull on the tensioner again to release tension and slide the belt over the p/s pulley. these instruction are for the 4.0l falcon motor, the 5.0 v8 is really similar

Aug 21, 2008 | 1999 Ford Super Duty F 550

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...