Question about 2000 Ford Focus

1 Answer

Where is the blower motor resistor in a Ford Contour 2000?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,515 Answers

Above the passenger's feet.

  1. Disconnect the negative battery cable.
  2. Remove the push pins and remove the upper footwell panel from under the passenger side of the instrument panel.
  3. Unplug the connector from the blower motor resistor assembly.
  4. Insert a screwdriver approximately 0.2 inch (5mm) under the edge of the resistor assembly to disengage it from the evaporator housing.
  5. Remove the resistor assembly.


Where is the blower motor - jturcotte_147.gif
Fig. Remove the resistor assembly by gently popping it out of the evaporator housing using a screwdriver



To install:
  1. Position the resistor assembly into the housing and snap it into place.
  2. Attach the resistor connector.
  3. Install the upper footwell panel.
  4. Connect the negative battery cable.

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BLOWERMOTOR


Is there a blower resistor module and/or relay? The blower resistor module often has a zener diode that burns out over time.(If you find this issue,see if you have a plugged up cabin air filter also).

Sep 24, 2014 | Ford Contour Cars & Trucks

1 Answer

How do I remove the heater blower motor on a 1995 ford contour. It has the 2.0 L 4 cyl.


Blower Motor Switch Resistor Assembly REMOVAL & INSTALLATION Fig. 1: Remove the resistor assembly by gently popping it out of the evaporator housing using a screwdriver 91056g24.gif
  1. Disconnect the negative battery cable.
  2. Remove the push pins and remove the upper footwell panel from under the passenger side of the instrument panel.
  3. Unplug the connector from the blower motor resistor assembly.
  4. Insert a screwdriver approximately 0.2 inch (5mm) under the edge of the resistor assembly to disengage it from the evaporator housing.
  5. Remove the resistor assembly. To install:
  6. Position the resistor assembly into the housing and snap it into place.
  7. Attach the resistor connector.
  8. Install the upper footwell panel.
  9. Connect the negative battery cable. prev.gif next.gif

Jul 31, 2010 | 1995 Ford Contour

2 Answers

I have a 1997 ford contour and the AC/Heater blower is not blowing air out. Is there a fuse for this?


fuse in fuse box there are 2 of them 1 under hood marked fuses and 1 under dash or in glove box

happy hunting and check your book

Jan 02, 2010 | 1997 Ford Contour

1 Answer

1999 contour heater blower doesn't work i


on blowermotor ground ground wire to a go metal ground and see if motor runs if it does then you have a bad ground. also try tapping on motor if it turns on then replace motor,hope this helps.

Oct 19, 2009 | 1999 Ford Contour

2 Answers

1998 ford contour blower motor not working


I have a 1998 Ford Contour. Believe it or not the ABS and the Blower Motor share the same fuse. It's a yellow 60 amp and you have to take off the battery to get at it. Of course this happened twice in the 6 years I had the car, both times in the dead of winter. Tires Plus in Pennsauken, NJ replaced it. Other than that, no complaints with my Contour.

Feb 10, 2009 | 1998 Ford Contour

1 Answer

98 ford contour no blower motor


fuse 37, 30 amp in central juction box and fuse 23, 15 amp in CJB.

50f97bf.gif

Jan 28, 2009 | 1998 Ford Contour

1 Answer

98 ford contour blower motor


This sounds like a ground issue or a relay. If you take the car to a major auto parts store they can run a diagnostic for free usually to see what it is.

Jan 28, 2009 | 1998 Ford Contour

1 Answer

Blower motor is not getting power


replace blower motor resistor.

Jan 03, 2009 | 2000 Ford Contour

Not finding what you are looking for?
2000 Ford Focus Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...