Question about 1985 Toyota Pickup

Open Question

85 Toyota truck turn signal relay flashers work turn signals don't.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Where do I install the electronic flasher relay for the turn signals?

If the turn lights come on and don't flash, like mine did, I found the flasher behind the ashtray.If you can't reach it,there are only 4 screws holding the bracket (1/4 in.nut driver) that holds the ashtray.

Posted on Dec 04, 2008

  • 347 Answers

SOURCE: How to replace Turn signal in 2000 Toyota Corolla

UNDER THE DASHBOARD

Posted on Sep 20, 2009

localwonder
  • 6784 Answers

SOURCE: turn signals and emergency flashers do not work

The turn signal flasher assembly is located under the driver's side of the instrument panel, on the front of the fuse panel, or under the center section of the instrument panel in the relay/flasher block. This is ,basically, the controller for your turn signals.

Click here to view a picture of the flasher switch.

Posted on Nov 22, 2009

  • 1 Answer

SOURCE: turn signals hazards flasher don't work jeep

I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Posted on Apr 01, 2010

  • 2841 Answers

SOURCE: Turn signals and hazard flasher stopped working in

Yes, you are on the right track. More than likely it is a defective flasher relay as one relay controls turn signal and hazard flash. The flasher relay is located behind the left side of the instrument panel.

Posted on May 01, 2010

Testimonial: "clay58 is very knowledgeable. His advice was on the money. Thanks!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know where the signal light flasher is located the signal lights don't flash


Your vehicle has 2 flasher relays. One for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the drivers side, under the dash, mounted on the drivers (Left) side of the steering column. The hazard flasher is mounted on top of the steering column. Do not get them mixed up.

Aug 12, 2011 | 1991 Chevrolet Corsica

3 Answers

Turn signals dont work on 1993 skylark. all bulbs are good. hazard lights blink fine. turnsignal dash light stays green and doesnt blink


There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.


clifford224_215.jpg

May 07, 2011 | 1993 Buick Skylark

1 Answer

My turn signals are NOT working, but emergency flashers are. Any ideas? They just went out today-- wondering if it's 1/ fuse 2/ turn signal relay or...?


Check for the FLASHER. For 1991 Toyota Truck Pickup 4WD (4 cyl) 2.4L FI 4cyl the Flasher is located front seating area, driver side, under dash, mounted driver side of steering column.

Hope this helps.

Feb 03, 2011 | 1991 Toyota Pickup

1 Answer

The Turn signals on my 1998 Toyota Corolla will not work they won't even show up on dashboard what is the problem?


Do the flashers still work? This sounds like a bad flasher relay problem.Locate the flasher for the turn signals and hazard lights. The flasher relay is under the dash near the steering column. It will be the larger of the square relays.Try wiggling it to see if turn siganls will work or emergency flashers will work. The relay should look like this jsmes1027.jpg

Nov 10, 2010 | 1998 Toyota Corolla

1 Answer

Turn signals and hazard flasher stopped working in my 2000 Toyota Sienna. Checked fuses and both are good. Is the relay the only other likely problem? Thanks!


Yes, you are on the right track. More than likely it is a defective flasher relay as one relay controls turn signal and hazard flash. The flasher relay is located behind the left side of the instrument panel.

May 01, 2010 | 2000 Toyota Sienna

1 Answer

Signal lights do not flash when using turn


There are two flashers. One for the hazards and one for the turn. Try switching around the flashers

Apr 12, 2010 | Toyota Tacoma Cars & Trucks

2 Answers

My toyota 92 pickup truck turn signals don't work;


Try changing out your turn signal flasher.it might be under your dash by your fuse box.Some trucks have two one for turn signals one for 4 way flashers.By all means check the fuse first.

Mar 09, 2010 | Toyota Pickup Cars & Trucks

2 Answers

Where is my falsher relay located? I have a 1998 Toyota Camry CE. HELP!


With your key on give a left or right turn signal. Try to listen and pinpoint the clicking of the turn signal flasher. Once you locate the turn signal flasher, your hazard flasher will look just like this and should be mounted nearby, typically next to it. The flasher simply pulls out and the new one just pushes in

Jun 12, 2009 | 1998 Toyota Camry

2 Answers

No flashers or turn signals


Try the fuse/breaker panel under hood, drivers side.

Jun 20, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...