Question about 1991 Jaguar XJ6

1 Answer

Power on both sides of coil contionious no power to plugs won't start 91 xj6 fuel pump also not working unless use a jumperat fuel pump relay.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like the problem I'm having. No noise coming from the fuel pump when the ignition is switched on. I've read that there is an inertia switch that, when activated, stops the fuel pump from working. Haynes says it's behind the passenger side kick panel, but I don't see it on my 1991 XJ6 (XJ40). Do you know where it is?

Posted on Nov 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No fuel getting to motor so no start. replaced pump fuses and relays all good. there is spark


you will need to check the plug to the pump on top of the tank. check for voltage. then if no volts trace the wires back. also you should check the relay have some one at the relay listening to see if it clicks when you turn the key. no click no volts no volts may be a warn out relay, if it buzzes change it.

Mar 20, 2014 | 1995 Plymouth Grand Voyager

1 Answer

Car wont crank over


For relay location and all types of jaguar xj6 fuel pump and starting problems,fuel pump replacing procedure.Fuel pump wiring.Fuel pump relay testing and replacing procedure.
Click the link below and go through its procedure:---
http://schematicsdiagram.blogspot.in/2012/07/jaguar-fuel-pump.html
-----------
Also check this help link for more help;---
Car Starting Problems http://whoisbyme.blogspot.in/2012/06/car-starting-problems.html

---------
These will help.
Thanks.

Apr 09, 2012 | 1993 Jaguar XJ6

3 Answers

How do you test the fuel pump relay on a 1991 Toyota Celica 1.6 Car just died and won't crank. We changed the ignition coil and still won't crank. Fuel pump is working. Toyota place does not check...


If the car will not crank then you have a battery, cable or starter issue. If the car will crank but not start then the problem may be the fuel pump relay. There should be an electrical diagram on the side of the relay. Apply 12v to either side of the coil and you should here a click. Then check for continuity between the other two terminals with voltage applied. If you have no continuity then the relay is bad.

Aug 30, 2011 | Toyota Celica Cars & Trucks

1 Answer

1986 Jaguar XJ6 Won't start. rolls over but that is it. replaced fuel pump relay and fuel pump. seems to have fuel at pump inlet, nothing comes out the outlet. I am lost. car ran out of gas before this...


if your fuel pump and relay are new, how about your fuel filter, if your fuel pump is working but no fuel turns out, check fuel pump polarity, if ok, there will be a clogging in fuel lines, take a high pressure air and plug it to fuel outlet in fuel lines test port, allow air to go back up to fuel tank and observe if the air goes, if not, check or change fuel line, if the air goes to tank, direct your fuel relay pin 30 and 87 and check if the fuel runs to the injectors, if not, change a good fuel pump

Jun 27, 2010 | 1990 Jaguar XJ6

2 Answers

I have a 91 s-10 that wont run...fuel pump runs and I am getting fuel to the carb all brand new plugs and wires and ignition coil and module and new cap and rotor? fires up and dies out?


The fuel pump relay is at fault. The engine will start running off the oil pressure sensor for the 3rd wire connected to the sensor feeds power to the fuel pump which makes your truck start right up. When the engine achomplish the standard oil pressure as needed the sensor shuts power off by the PCM default system and turns on the fuel pump relay to continue working the fuel pump. replace the relay and you will be driving around again

Mar 28, 2010 | 1985 Chevrolet Chevy

1 Answer

No power to fuel pump and or relay


It's best to buy the subscription to your car here www.alldatdiy.com and read the information on that car, I only have down to 93 and don't know if they are the same. hope this helps.

Aug 09, 2009 | 1990 Jaguar XJ6

1 Answer

Jaguar xj6 won't start


Timing out ,check it on no1 cylinder at TDC then check distributor position ,the arm is pointing at no1 plug lead

Jun 04, 2009 | 1993 Jaguar XJ6

3 Answers

Fuel pump relay location


Hi irvj6ohn:
The 1993 and 1994 XJ6 Fuel Pump Relay is located in the trunk of the vehicle on the right hand rear side. It is light blue and black in color.
I hope this helps.

Regards
bobbyapal94

Oct 04, 2008 | 1993 Jaguar XJ6

Not finding what you are looking for?
1991 Jaguar XJ6 Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...