Question about 1995 Jaguar XJ6

1 Answer

I need to replace bulbs in my 1995 Vanden Plas, Can anyone send me the removal instructions for the instrument cluster?? It would be muich appreciated

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

1. Locate the bolts holding the bumper cover in place. Use a socket wrench to remove the bolts, allowing you to pull the cover down. Then take off the bolts securing the headlight assembly and pull out the entire assembly from the car.
2. Squeeze the retaining clip on the washer hose with a pair of pliers and pull it back, then pull the hose off. Next, unplug the electrical connector.
3.Unbolt the headlight washer motor with your socket wrench to gain access to the bulb. Pull the bulb straight out and take it to a Jaguar dealer or the local auto-parts shop to purchase a replacement bulb.
4.Reassemble the light assembly in the reverse order. Plug in the new bulb, re-bolt the washer motor, plug in the electrical cord and reattach the hose and retaining clip. Finally, re-bolt the headlight assembly and the bumper cover.
5.Turn the car on and switch the lights on to test the newly installed bulb.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I turn off the Trunk Open warning that is stuck on, on my dashboard?


Hello,
The obvious action to take would be to trace down the component that has failed/shorted/ etc and replace it/fix it so the light on the dash goes out properly. If you have done something like this already to no avail then you could try taking out the corresponding bulb in the instrument cluster itself. You may need to remove the cluster but the bulbs tend to come out pretty easily. I never recommend and am not currently recommending anyone ever take out any bulbs in the cluster as it can be misleading especially upon resale. But for daily driving purposes and convenience, ill throw that option on the table.. Hope this helps

Jun 25, 2015 | 2001 Jaguar Vanden Plas

1 Answer

How do i reset the engine control module in my 1995 jaguar vanden plas 4.0 will this reset ALL setings because i think this car needs it had 3 owners and cant seem to get memory and othe little things.


I'm not sure what you mean by "reset" but have a look for an OBDII / EOBD AUTO SCANNER (there's usually one or two on ebay.) Is that the sort of job you want to do?

May 26, 2014 | 1995 Jaguar Vanden Plas

1 Answer

I am looking for a service manual for 1995 Jaguar xj6 vanden plas. I am willing to pay for the manual. help me please.


if you can help yourself there are 97 ads for "1995 jaguar manual" on eBay as of 4-27-11.

Apr 27, 2011 | 1995 Jaguar Vanden Plas

1 Answer

Need schematics or instructions to disassemble dashboard on a 1995 Chev Tahoe. "idiot" lights need replacement


Disconnect the negative battery cable. If it is equipped with tilt steering, lower it to the lowest position. Unfasten the 8 clips that retain the instrument cluster bezel and remove the bezel. There are 4 clips on the top of the cluster and 4 on the bottom of the cluster bezel. Unplug the electrical connections from the headlamp switch, dimmer control and any other accessory switches that would interfere cluster removal. Unfasten the 4 cluster retaining screws and remove the cluster making sure nothing contacts the circuit connections. Turn the bulb assembly 1/2 turn to the left to remove. To reinstall, Install the bulb assembly. Place the cluster into position without touching the connector pins. Install and tighten the cluster retainers. Install the remaining components in the reverse order of removal.

Oct 23, 2010 | 1995 Chevrolet Tahoe

1 Answer

Need to replace instrument cluster/AC bulbs


Hello, You can obtain a 2004 Ram Factory Service Manual with all of that information available from Promanuals.net. The reason why it may be so important is because right before the removal instructions the service manual has diagnostic instructions to try. There are numerous pages on removing the instrument cluster, and cluster bezel.

(1) Disconnect and isolate the battery negative
cable. (For Airbag)

(2) Remove the cluster bezel from the instrument
panel. (Refer to 23 - BODY/INSTRUMENT PANEL/
CLUSTER BEZEL - REMOVAL).

(3) Remove the four screws that secure the instrument
cluster to the instrument panel structural support
(Fig. 5).

(4) Pull the instrument cluster rearward far
enough to access and disconnect the instrument
panel wire harness connectors for the cluster from
the connector receptacles on the back of the cluster
housing.

(5) Remove the instrument cluster from the instrument
panel.
9e8a042.jpg

Oct 01, 2009 | 2004 Dodge Ram 1500

1 Answer

Dashboard Instrument cluster does not work.


there are 2 large terminal plugs with the wiring for all the instruments that are plugged into the back of that panel. make sure they are snug and in place. You reach in and under but it may easier to "simply" remove the cluster. 4 screws hold it in place accessible form underneath and with a long phillips screwdriver and lighting.

Aug 26, 2009 | 1994 Jaguar XJ6

2 Answers

Dash gauges (i.e. speedometer, etc.) do not work


sounds like the cluster has shorted out, replacement of the cluster is your only option. don't forget to check all your fuses

May 24, 2009 | 1995 Jaguar XJ6

2 Answers

Xj8 instrument lights not on when headlights on


Make sure the dash lights aren't turned down first of all. I know that sounds basic, but I've seen it happen before. Believe the twist is near the knob to adjust the steering wheel which is lower steering column left hand side. Otherwise, I would check fuses to be sure. finally, the last thing I would do it pull the gauge cluster and check connections as well as bulbs.

Apr 04, 2009 | 2001 Jaguar XJ8

2 Answers

1988 Jaguar Vanden replace headlight


What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.

May 18, 2008 | 2000 Jaguar Den Plas Supercharged

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...