Question about Chevrolet 1500

1 Answer

Drivers side wiper blade does not move. it has the cips no bolts. 91 chevy pick up. but you can feel the motor bumbing it if you try to move it with your hand

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,585 Answers

Pull the blade off the wiper linkage and check the hole. they get worn out.(smooth). Also check the linkage. Most likely its the blade. you can get one at the salvage yard or buy one new at the dealer.

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Cadillac Deville wiper blade on driver side not moving


bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken parts.

Feb 09, 2013 | 1999 Cadillac DeVille

3 Answers

Passenger side wiper does not work, but the driver side works fine. i think it broke somehow when i turned on the wipers while there was ice on the windsheild. the driver's side worked, but the ice...


When you tried to move the wiper with the ice it probably broke an inner componette and connecting rodes from motor. You'll haft to inspect the rodes and motor to know what damage is done but it you can move the wiper easily by hand it's definitly broke. If it is real hard and dont want to move it might be jammed and you might be able to move it alittle to move it back into place.

Feb 28, 2011 | 2007 Nissan Altima 3.5 Sedan

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    1 Answer

    How to remove the wiper arm from the shaft so I can remove the cslotted cowl to replace the wiper bushings.


    REMOVAL & INSTALLATION
    (see Figures 1 and 2)

    To remove the arm from the pivot, lift the arm to permit the latch to be pulled out to the holding position and remove the arm from the pivot with a rocking motion.

    zjlimited_140.jpg

    Fig. 1: Mount the wiper blade/arm as shown-Dakota models

    zjlimited_141.jpg

    Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups



    When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.


    Hope this helps to solve it.

    Nov 26, 2010 | 1992 Dodge Ram 250

    1 Answer

    Drivers side windshield wiper not moving


    The bolt that holds the wiper on is loose. There is a little plastic cap at the other end of the wiper arm, the side away from the wiper blade. Remove the cap and tighten the bolt. That should get it going again.

    Jan 21, 2010 | 1992 Plymouth Sundance

    1 Answer

    Driver's side wiper blade loose and does not work.


    try the lads at halfords they know a lot someimes. but try wd40 on motor for that side on joints that come out of car.

    Mar 25, 2009 | 2000 Plymouth Voyager

    1 Answer

    Wiper arm on 2001 chevy blazer on driver side does not move. what is the reason why?


    check bolt at base of wiper arm under little plastic,try wipers if bolt is moving,screw it in tight,if pivot bolt is not moving,check linckage under cowl

    Feb 28, 2009 | 1997 GMC Jimmy

    2 Answers

    2005 Chevy Equinox Wiper blade hits edge of window


    The 23 should work on the drivers side but you will need a 19" on the passenger side.
    Hope this helps and let me know.
    Regards,

    Feb 18, 2009 | 2005 Chevrolet Equinox

    1 Answer

    Driver's side wiper arm on my '93 Sidekick is not working


    This is what I Found there was not any Illustration's with it looks Fairly simple, Good luck



    FRONT
    1. Disconnect linkage assembly from wiper motor shaft.
    2. Disconnect electrical connectors from wiper motor.
    3. Remove wiper motor attaching bolts, then wiper motor.
    REAR
    1. Remove wiper blade and arm assembly.
    2. Remove access panel on back door.
    3. Disconnect linkage assembly from wiper motor shaft.
    4. Disconnect electrical connectors from wiper motor.
    5. Remove wiper motor attaching bolts, then wiper motor.
    Skill
    Level
    Mfg.
    Warranty
    Standard Wiper Motor Labor Replace Front B 0.7 1.0
    PLEASE DONT FORGET TO RATE ME Thank You Much

    Jan 20, 2009 | 1995 Suzuki Sidekick

    1 Answer

    Wipers seized- motor works. cant move blades more tham1=2 inches.


    you have to remove the whole wiper arm both sides...under hood remove 5 -5/16 screw from vent panel .. remove panel .. under panel on drivers side you will see where arm attach to wiper motor ..remove nut... then remove 3 bolts that hold wiper motor to firewall .

    Nov 29, 2008 | 1988 Chevrolet S-10

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    41 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75817 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8180 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...