Question about 2007 Chevrolet Impala LS Sedan New Cars

Open Question

Need to replace rear turn signal bulb on 2007 impala how do i gain access to the bulb?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ndguy2481
  • 251 Answers

SOURCE: replace rear turn signal bulb

it's in the trunk behind the materail in the trunk

Posted on Sep 11, 2008

emissionwiz
  • 75807 Answers

SOURCE: Replacing rear turn signal bulb in 2003 Mustang

remove the trim panel at the very rear of trunk, remove it and place it out of the way, remove tail light Assembly retaining nuts top and bottom, I think there are 6 per side, pull the tail light assembly straight back to access the bulbs for replacement.

Posted on Dec 04, 2008

  • 2 Answers

SOURCE: rt front turn sighal burned out - how to access bulb to replace

There is a latch to the Van's outside just insert a flat blade screw driver and the turn light assembly will swing toward the middle of the van.

Once open the lamps twist out.

Posted on Feb 07, 2009

jpstuhr
  • 49 Answers

SOURCE: need to replace 95 Geo front turn signal bulb

Here's a diagram

b0bc01b.jpg

Posted on Feb 12, 2009

  • 1 Answer

SOURCE: need to replace rear turn signal bulb 2002 thunderbird

I just did it last week. You have to remove the 2 nuts( in the trunk) that hold the tail light assembly to the car . One bolt is long and is against the inside fender, the other is easier to get at. Once the nuts are removed yank at the tail light ***'y from the out side and pull it loose( it may stick a little because of the rubber seal. . The light bulb then is removed from the ***'y by twisting, a locking bulb holder. You can get the bulbs at Wal-mart. They are sold in 2 packs. Len Florida

Posted on Apr 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

07 Impala rear driver side brake light and turn signal does not work, but when I checked the bulb it was working just not when I press the brake. The left turn signal on the dash also blinks rapidly.


Sounds like a possible bad ground connection.
Make sure the contacts for the bulb are clean.
Make sure the cround connection is not corroded.

May 21, 2015 | 2007 Chevrolet Impala

1 Answer

How do i replace the turn signal indicator bulb on 1983 bmw 320i?


You don't say if its front or rear?
The rear is through the back corner of the boot/trunk, you may have to remove some trim. The bulb holder is a twist and remove type and be careful to line up the tags on replacement.
Front is similar and requires access to the inner wing, this may mean removing some other items to gain access.

May 31, 2014 | 1994 BMW 3 Series

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

I am trying to replace aleft rear turn signal bulb on a 2005 lacrosse. I removed two wing nuts but cannot remove assmbly. Is there another wing nut holding it in. I cannot find it?


3 wing nuts. here is the info needed.

gmlogoflat.gif Service Information
bhome.gifbpublication.gifbnumsrchbutton.gifbnews.gifymkbutton.giffeedback.gifbhelp.gif
2005 Buick LaCrosse ' Allure, LaCrosse VIN W Service Manual ' Body ' Lighting Systems ' Repair Instructions ' Document ID: 1537542 Tail Lamp, Turn Signal Lamp, High Mount Stop Lamp, License Lamp, Backup Lamp Replacement - Rear
1537540.gif
tif.gif
Callout
Component Name
Notice: Refer to Fastener Notice in the Preface section.
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Turn Signal/Stop Lamp Assembly Replacement - Rear 1
Nut, Turn Signal/Tail Lamp (Qty: 3)
Tip
Pull back rear compartment carpet to gain access to lamp.
Tighten
2 N·m (18 lb in)
2
Lamp, Turn Signal/Tail Lamp
Tip
Twist the bulb socket and pull inward to replace the bulb.
License Lamp Replacement 3
Screws, License Lamp (Qty: 2)
Tighten
2 N·m (18 lb in)
4
Lamp, License Lamp
Tip
Twist the bulb socket and pull inward to replace the bulb.

Jul 29, 2011 | Buick LaCrosse Cars & Trucks

2 Answers

The turn singnals don't flash on my 2004 chevy impala


It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged.
Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057
Hope this helps.Your valuable feedback would be appreciated.Thanks

Jun 11, 2011 | 2004 Chevrolet Impala

1 Answer

How do I change front blinker bulb on 2003 chev impala


First,
  1. Turn the engine off and open the hood. Pry up the two fasteners from the radiator air baffle with a flat head screwdriver. Move the baffle to the side to access the top of the headlight case.
  2. Step 2 Pull up the two metal rods behind the headlight case. These secure the case to the car. You may need your pliers to pull them up.
  3. Step 3 Gently pull the headlight case out to access its rear. On the rear, you will find several black dust covers. Twist off the dust cover closest to the fender (the outward dust cover) to access the turn signal bulb.
  4. Step 4 Turn the bulb module counterclockwise to release it. Unplug the electrical connector from the bulb module. Connect the new bulb to the electrical connector (don't touch the glass with your hands; hold it by the plastic piece). Insert the bulb module in the turn signal housing, turn it clockwise and screw the dust cover back on.
  5. Step 5 Insert the headlight case in the mount. Push the pins back down to secure it. Position the radiator baffle in its place and insert the fasteners.
  6. Rear Turn Signal Bulbs
  7. Step 1 Open the trunk. Remove the net from the side mounted wing nut (on the side with the faulty turn signal). Twist the wing nuts (there are two per side) counterclockwise to remove them.
  8. Step 2 Peel the carpet layer back to access the rear signal lamp wing nuts. Twist these wing nuts (two per side) counterclockwise to remove them and release the rear signal.
  9. Step 3 Carefully pull the rear signal assembly away from the Impala. The rear turn signal is the inner bulb (closest to the trunk). Press the tab on the bulb module and turn it counterclockwise to release it from the rear signal assembly.
  10. Step 4 Pull the old bulb straight off the module (don't twist). Insert the new bulb in the module. Depress the tab on the connection and insert the module back in the assembly. Twist it clockwise.
  11. Step 5 Insert the rear signal assembly. Re-attach the assembly's wing nuts and push the carpet layer back in place. Tighten the other two wing nuts to secure the carpet layer and reconnect the cargo net

May 09, 2010 | 2003 Chevrolet Impala

1 Answer

How to change a turn signal on a 2007 impal


Open the trunk, inside the trunk is a liner. Pull the liner back and you'll see the wiring going to the back of the light. Remove the light bulb retainer by unscrewing it and change the bulb.

Apr 02, 2010 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Right front turn signal not working at all right rear flashes fast? 2004 Impala


Sounds like your front turn bulb burnt out. When the turn signal operates fewer bulbs it works faster. You need to change the right front bulb.

Aug 09, 2009 | 2004 Chevrolet Impala

1 Answer

2002 impala brake lights/rear directional signal went


You should be able to access the bulb from the truck without removing any covers. the socket that goes into the back of the housing should twist to allow you to replace the bulb. try to twist and pull.

Jun 11, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2007 Chevrolet Impala LS Sedan New Cars Logo

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...