Question about 2006 Pontiac G6

1 Answer

I have Pontiac G6 2006, I have a code P0014, before the check engine the Transmission start to give a loud noise when shifting from N to D, I have changed Intake Sensor, the problem gone for one month and come back again now with P0014 code and the advice is to replace VCT Actuator, Is that going to solve my problem, now the symptoms gone and the car running OK.

Posted by on

  • Anonymous Mar 19, 2014

    P0014 code-engine light on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

You dont say what engine you have so I ASSUME its the 4 cylinder??? I dont know what your car needs because I dont know what has been checked, but even the wrong viscosity engine oil or low oil level can cause this code. Or it could be a cam sensor problem. I would have a professional repair shop check it out and recommend repairs.

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission make loud sound when put it in revers


PLEASE HELP! SOS! car starts but doesnt move! - Club3G Forum ...

www.club3g.com > ... > Performance & Tech Forums > Problem Reports

Nov 16, 2010 - 61 posts - ‎14 authors
now yes, i will take the transmission is fubar into consideration but theres an .....however... idk about my cv joint, my car ONLY would make a loud ping noise when i move from a stop or brake ..... almost always when i put it into reverse. such as an engine mount sound, ... Vehicle: 2004 Eclipse Spyder GT. Loud knocking sound after oil change..
14 posts
Sep 20, 2010
Horrible noise upon start when cold
21 posts
Dec 24, 2009
Sporty knocking.. Oh noez!!one!!1!
16 posts
Mar 22, 2006
More results from www.club3g.com

Loud thump when I shift into drive or reverse - CarGurus

www.cargurus.com > Questions > Chevrolet > Cavalier

CarGurusDec 19, 2012 - And while driving loud thump when car motor shifts th... ... Bad throttle position sensor can trip both lights and make the transmission shift at high rpms and shift hard even under light acceleration. .... the transmission will shift hard when firstput into reverse or drive ... 2004 Chevrolet Cavalier LS For Sale.Missing: mitsubishi ‎eclipse

Mitsubishi Transmissions & Drivetrains Repair Questions ...


Dec 06, 2015 | 2004 Mitsubishi Eclipse

1 Answer

Transmission making loud grinding/sucking sound, doesn't go when in drive or reverse


Is it an automatic John? When was the last time you checked the level of your ATF (automatic transmission fluid)?

There are many different types, so make sure you get the right one.

If it is a manual shift, check the gearbox oil level. If that is OK, you need a transmission specialist. Look in Yellow Pages.

Nov 26, 2015 | 2000 Pontiac Grand Am SE

3 Answers

Engine light came on and the transmission started shifiting hard. I took it it and had trans serviced.


if you had the trans serviced what was the code from the check engine -----if they didnt give you code go get code most auto stores offer this service for free

Aug 26, 2015 | 2007 Pontiac Vibe

1 Answer

1998 land rover discovery transmission makes loud banging noise when shifting from pari to drive?


Tons of possibilities here (transmission, differential, motor mounts, transmission mounts....), so I'll ask some debug questions to help narrow it down. Does it make the noise when shifting into reverse? Also, does it make the noise only when shifting from park, or also when shifting from neutral (into drive or into reverse)? Did the noise start as an occasional, softer noise and get worse over time, or did it start suddenly? Does the vehicle lurch at the same time as the noise? What happens when you go from Reverse to Drive, or vice versa? Has any work been done recently (brakes, tires, alignment, suspension, transmission)?

Jul 20, 2014 | Land Rover Cars & Trucks

1 Answer

OBDII Codes


P0014 - Exhaust Camshaft Position System Performance
P0973 - Shift Solenoid A Control Circuit Low
P0700 - Transmission Control System Malfunction

Dec 18, 2013 | 2010 Chevrolet Cobalt

1 Answer

2006 pontiac g6 clunking noise when shifting gears check engin light came on day after noise started p0014 code had it scaned by the nice atuo zone guy . He gave 4 possible causes 1 loose cam or crank...


Most likely the advance mechanism on the cam gear has jammed in the advanced position. You're going to have to take the cover off the gear to see what's going on. If there is sludge, you need to also desludge the engine.

Jun 07, 2017 | 2006 Pontiac G6

1 Answer

2006 pontiac g6 clunking noise when shifting gears check engin light came on day after noise started p0014 code had it scaned by the nice atuo zone guy . He gave 4 possible causes 1 loose cam or crank...


Hey Cab4457, Please take your pontiac to a reputable dealer.. you can "hunt and peck" at "fixes" for $$$$$ and still not fix it.. better to let someone that knows how, than spend $$$$ trying to do it yourself,, this sounds a little more than "shade tree" level issues!!

Jun 06, 2017 | 2006 Pontiac G6

1 Answer

2001 Dodge Grand Caravan. has been making a loud whining noise for about a week. started slipping last night. seems to get worse when going from a complete stop and when shifting into gears. other than...


MOST LIKELY HAS A PLUGGED TRANSMISSION FILTER.
TORQUE CONVERTOR CLUTCH FAILURE COMMON.
CHANGE TRANSMISSION FILTER AND ROAD TEST.
IF NOISE IS GONE AND RUNS NORMALLY, CHANGE TORQUE CONVERTOR AND RESEAL TRANSMISSION.

May 19, 2010 | 2001 Dodge Grand Caravan

2 Answers

2004 Pontiac Grand Am SE1 loud noise


It is probably the wheel bearings they have been known for that.

Oct 26, 2008 | 2004 Pontiac Grand Am

Not finding what you are looking for?
2006 Pontiac G6 Logo

1,774 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...