Question about 2006 Ford F 350 Super Duty

1 Answer

TRIED BEATING THE U JOINT OUT OF 2006 FORD F350 BUT THE U JOINT WILL NOT COME OUT. ANY OTHER ANSWERS?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

YOU DONT HAMMER U JOINT YOU HAVE TO PRESS THEM OUT. YOU NEED A TABLE VISE AND 2 RATCHET SOCKETS ONE BIG SOCKET AND ONE SMALL SOCKET.ONCE YOU REMOVE THE UNIVERSAL JOINT SNAP RINGS. PUT YOU U JOINT IN A TABLE VISE. YOU USE LARGE SOCKET ON ONE SIDE AND USE SMALL SIZE SOCKET ON OTHER SIDE WHEN YOU TIGHTEN TABLE VISE.THE SMALL SOCKET WILL PRESS OUT JOINT BEARING ON THE OTHER SIDE THROUGH THE BIG SOCKET.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Contact between brake caliper and disc brake on Ford f350 possible ujoint problem or ball joints some up and down movement in hub when wheel is removed


Since you mentioned U-joint, I'll assume you're talking about a 4x4 F350 front wheel. I am not that familiar with the F350 4x4, but if the rotor is touching the brake components (and you have good pads), the problem is not the ball joints or the u-joint. It is most likely the wheel bearings.
And if it's touching the caliper or anchor bracket, the bearings are pretty bad.
Jack the wheel off the ground. Grab the top and bottom of the tire, and see if there is any "play" in and out to the truck. There should be virtually no play. If not convinced, check the other side for comparison.

Apr 12, 2015 | Ford F-350 Cars & Trucks

1 Answer

Need to locate 2006 Ford F350 Super Duty EGR Pressure Feedback Sensor


I need more info to give you correct answer but I know I have the answer

Jan 26, 2013 | Ford Cars & Trucks

1 Answer

How to replace the universal joints in ford f350 4x4


Front axle or drive shaft? What u-joints do you mean, not enough information to get you to the right path? What year truck as some are easier than others. Need more information to properly solve your question

Jan 04, 2011 | 2000 Ford F350 Super Duty Super Cab

1 Answer

2006 ford f350 diesel fuel gauge read empty then full whats wrong


2006 F350 6.0 Engine light Code is reading bad fuel gauge sensor could this effect fuel pump and performance. Can I wait until have time to change.

Nov 06, 2010 | 2006 Ford F 350 Super Duty

1 Answer

2006 ford f350, leaking fuel at the fuel filter


must identified what part of it is leaking has it been changed and wrong or wrongly installed gasket promble

Mar 14, 2010 | 1992 Ford F350

1 Answer

What is rotor thickness on front brake rotors?


Went up to the auto supply and looked my answer up in a old fashion catalog. Can't beat it, faster and free.

Jan 23, 2010 | 2000 Ford F350 Super Duty Super Cab

3 Answers

I ahev a 2005 ford f350 with 6.0 diesel, i am


Bad Injectors most likely. I have a 2006 f-350 and was having the same problem. I ended up changing the fuel pump and 4 injectors.

Jan 11, 2010 | 2006 Ford F 350 Super Duty

1 Answer

How do you change ball joints on 2004 Ford F350 4x4


need a ball joint tool to press in the new joints

Aug 29, 2009 | 2004 Ford F350

1 Answer

Trying to replace u-joints on a 2006 f-350 4x4


Hello , you really need to carefully beat the hell out of them. Choose a side remove ,both e shaped clips and hammer it down. This will push the other side out , thus allowing you to remove the bearing cap and continus hammering until out. This worked on my 1989 F250

Jul 25, 2009 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...