Question about 1999 Dodge Neon
Star with the cooling fans, they are supposed to start running wend I turn the AC on or wend the car is very hot. I check the fans motors they works fine by then self, change the relay and temperature sensor, also checks the wires and fuses are OK to the only think left is the PCM I check the wires going to. they are looking OK I want to make sure is not other think because the PCM is not cheap.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, the easy way is to just bypass the relays all together. Install a switch on the inside of the car like you would fog lights. This will solve the problem of replacing thing after thing and wasting money. Just a $7.00 fix. After doing that unplug all the sensors and then the battery for at least 60 second to reset the computer. Than restart the car and the check engine light should go out, may take a day or so. Same thing with your gas cap, re-securing it will take a day or so for the light to go out. Good luck. I love my '97 neon.
Posted on May 10, 2009
Did you replace the sensor by the thermostat in the engine block or the one under the drivers headlight, There are two, the one next to the thermostat controls the temp gauge in the vehicle. the one under the headlight assembly controls the actual fans and is a electronic module. You have to remove the head light assembly to get to it.
Posted on May 29, 2009
SOURCE: blower motor will not work
Do further tests at the relay to ascertain whether the fault lies before or after the relay.
Check power availability at the supply side of the relay contacts - should have 12v from a supply fuse on one side of the normally open contact (note -this supply may only be available when Ign or Acc sw is on).
If power supply is ok at the relay contact, check control input to relay operate coil.
If a ground (or 12v) operates the relay, operate the relay with a local ground (or 12v) and check blower motor runs.
If all above OK, check control signal from fan switch is arriving at the relay control coil.- if not trace wiring back to the switch.
Posted on Jul 03, 2009
Tips for a great answer:
Apr 08, 2016 | 1998 Ford Mustang
Aug 16, 2014 | Cars & Trucks
Sep 27, 2012 | 1996 Buick Century
Apr 09, 2011 | 1999 Cadillac DeVille
Feb 18, 2011 | 1998 Chevrolet Tracker
Nov 02, 2009 | 1994 Buick Roadmaster
Oct 10, 2009 | 1985 Porsche 944
Aug 17, 2009 | 2000 Jeep Grand Cherokee
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: