Question about 2001 Chevrolet Cavalier

1 Answer

Rear end is shaking - 2001 Chevrolet Cavalier

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

Could be as simple as an out of balance wheel/tire, this is the most likely if it's only noticeable above a certain speed, it is worth checking that the lug nuts are tight (70-80 ft/lb for alloy and 100 ft/lb for steel wheels) also, try shaking the wheel side to side (hands on top and push/pull fairly hard) if you can hear any clunking noises or notice movement beyond the little shaking the rest of the car does, there's an issue that it needs to be taken in for and is a safety hazard.

Posted on Nov 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my the rear end of my car shake at highway speeds?


have the rear suspension bushes checked out including the shockies.
I would also suggest a rear end wheel alignment and a wheel bearing check

Jun 19, 2015 | 2006 Hyundai Sonata

1 Answer

Rear end noise, shaking


Check the rear driveshaft u-joints. Most likely the rear u-joint at the differential is seized/seizing. May here a rotational squeaking at low speeds. If you want to check it yourself. Remove the rear driveshaft and move the u-joint in each direction and check for tightness. Do so with both ends. Let me know how it works out for ya!

Oct 14, 2013 | 2005 Dodge Ram 2500 Truck

3 Answers

1999 silverado rear end shakes at all speeds. put brand new tires n balanced


You should have an alignment on all 4 wheels. Check that the rear axle has not shifted forward or backward on one side. If you have Rear Disc Brakes, have the Hub & Rotor checked for alignment. Does this shaking happen all of the time or just when turning? Does it only happen when you apply the brakes? A Rotor and Hub that is out of alignment will cause shaking. Also check that the Caliper Slide Bolts are lubricated, otherwise the caliper will not operate correctly and the inside of the rotor will wear out faster. This can cause shaking also.

Jun 04, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

Real wheel shaking wen i turn


Does it shake when turning both directions or just one or the other? It is most likely the clutch packs in the rear end. Especially if you have around 100,000 miles on the truck and have never had a rear end service done.

May 13, 2012 | 2004 Ford F150

1 Answer

05 F350 Bad shake from 45mph to about 58 and then dies down around 60. Shakes in the rear end, front end is fine. just rotated and rebalanced all tires. Just started doing this about 6000 miles ago if...


This is either the uni joints or the center bearing if it has a 2 piece tailshaft. Uni joints can be quiet dangerous if they let go. jack the back end up, handbrake off and in 1 hand hold the tailshaft, in the other, hold the diff pinion (input) wriggle them against one another. if there is any movement this needs to be replaced. center bearing- if there is any movement this needs to be replaced.

Sep 21, 2011 | Ford F-350 Cars & Trucks

1 Answer

2002 f250 shake


You have identified the problem when you pulled the drive shaft and the shake was gone. So you know it is between the tranny and the rear end. If it is not the universal joints, then you have a warped drive shaft.

Jun 22, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Cab shaking and lots of vibrations out of the rear end


i had the same problem it was the u joints

Feb 25, 2009 | 1996 GMC Jimmy

2 Answers

91 volvo rear end shakes


check your rims and tires it could be a bent rim

Feb 05, 2009 | 1991 Volvo 740

1 Answer

My 2003 Rendezvous has a vibrating noise coming from the rear end when I hit holes or bumps in the road. Three different dealers say they can find nothing wrong in the rear end. Help!


Really a lac of info, but do check the exhaust. Is the noise when you put the peddle to the metal, or easing off??? And what sort of sound?? 1/ shake your teeth out,2/shakes the whole car, 3/just annouying? Please help us help you! Frankster016

Oct 22, 2008 | Buick Rendezvous Cars & Trucks

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...