Question about Nissan Pathfinder

1 Answer

How to install thru bolt and nut on 2001 pathfinder alternator

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 17,970 Answers

Check this procedured....

Alternator - Removal & Installation

3.3L & 3.5L Engines

  1. Remove the or disconnect the following:
    Negative battery cable Alternator harness connectors Engine under cover Alternator belt Alternator
To install:


how to install thru bolt - zjlimited_62.jpg


Fig. Alternator mounting-3.3L & 3.5L Engines (click for zoom)

  1. Install or connect the following:
    Alternator Alternator belt. Tighten the adjustment bolts as shown in the accompanying illustration. Engine under cover Alternator harness connectors Negative battery cable

4.0L Engine
  1. Remove the or disconnect the following:
    Negative battery cable Fan shroud Accessory drive belt Alternator support brace Alternator upper bolt Alternator harness connectors Alternator
To install:
  1. Install or connect the following:
    Alternator harness connections. Tighten nut to 8 ft. lbs. (11 Nm). Alternator upper bolt. Tighten to 48 ft. lbs. (65 Nm). Alternator support brace. Tighten bolts to 21 ft. lbs. (29 Nm). Accessory drive belt Fan shroud Negative battery cable

Hope this helps.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace an alternator for a 2001 Nissan Pathfinder XL 3.5


Nissan xterra alternator removal and installation - YouTube

? 2:53
https://www.youtube.com/watch?v=n35OVegqBsg
Feb 7, 2014 - Uploaded by Francisco Delira
2001-2004 Nissan xterra alternator removal and installation removing ... how to replace the alternator on ...

How to Change an Alternator : Removing the Serpentine ...

? 4:02
https://www.youtube.com/watch?v=nJgVJNtZxuA
Oct 18, 2007 - Uploaded by expertvillage
Learn how to remove a serpentine belt with expert car maintenance tips in this fre... ... How to Change an ...

Alternators ' Starters ' Belt Tensioner ' Tensioner Pulley ...

https://www.pepboys.com/parts/alternators_starters/

Pep BoysFind alternators, alternator belts, parts and starters you need at Pep Boys. ... Regulators; Alternator Relays; Belt Tensioners Pulleys; Alternator Repair Kits ...

2001 Pathfinder alternator installation problems - Nissan Forum

www.nissanforums.com/pathfinder/172789-2001-pathfinder-alternator-i...

Dec 14, 2012 - 10 posts - ‎3 authors

Dec 03, 2015 | Nissan Cars & Trucks

1 Answer

How to change alternator 2005 chryler 300


This answer covers:
2005 Chrysler 300 6cyl VIN "G" 3.5L SFI HO (72% of 2005 300's)
2005 Chrysler 300 6cyl VIN "R" 2.7L MFI DOHC (28% of 2005 300's)
2005 Dodge Magnum 5.7L engine

Alternator

Removal & Installation


WARNING - Precautions Section:
Disconnect negative cable from battery before removing battery output wire (b+ wire) from alternator. Failure to do so can result in injury or damage to electrical system.

2.7L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable.
  3. Remove alternator drive belt.
  4. Disconnect alternator field circuit plug.
  5. Remove B+ terminal nut and wire.
  6. Remove 2 lower mounting bolts.
  7. Remove alternator.
To install:
  1. Install alternator.
  2. Install upper bolt mounting bolt.
  3. Install 2 lower mounting bolts.
  4. Tighten bolts to 48 ft. lbs. (65 Nm).
  5. Install B+ terminal nut and wire. Tighten nut to 115 inch lbs. (13 Nm).
  6. Connect alternator field circuit plug.
  7. Install alternator drive belt.
  8. Connect negative battery cable.
3.5L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable.
  3. Remove alternator drive belt.
  4. Remove bracket bolts.
  5. Remove upper mounting bolt.
  6. Raise and support vehicle.
  7. Remove middle splash pan.
  8. Disconnect alternator field circuit plug.
  9. Remove B+ terminal nut and wire.
  10. Remove lower mounting bolts.
  11. Remove alternator.
To install:
  1. Install alternator.
  2. Install lower mounting bolts. Loosen install the upper mounting bolt.
  3. Tighten lower mounting bolts to 48 ft. lbs. (65 Nm).
  4. Connect alternator field circuit plug.
  5. Install B+ terminal nut and wire. Tighten nut to 115 inch lbs. (13 Nm).
  6. Install middle splash pan.
  7. Lower vehicle.
  8. Remove loose installed upper bolt.
  9. Install bracket and bracket bolt.
  10. Install upper mounting bolt and bracket.
  11. Tighten upper mounting bolt to 48 ft. lbs. (65 Nm).
  12. Tighten the bracket bolt to 40 ft. lbs. (54 Nm).
  13. Install alternator drive belt.
  14. Connect negative battery cable.
5.7L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable at battery.
  3. Remove alternator drive belt.
  4. Raise and support vehicle.
  5. Unsnap plastic insulator cap from B+ output terminal.
  6. Remove B+ terminal mounting nut at rear of alternator. Disconnect terminal from alternator.
  7. Disconnect field wire connector at rear of alternator by pushing on connector tab.
  8. Remove alternator support bracket nut and bolt. Remove support bracket. See Figure 1.
  9. Remove 2 alternator mounting bolts. See Figure 2.
  10. Remove alternator from vehicle.

Fig. 1 Alternator Support Bracket - 5.7L engine

7309257c-afe6-4c17-9422-d7fa2e3bd4b1.jpg

Fig. 2 Alternator Mounting Bolts - 5.7L engine

22b81ff7-7912-467f-9eaf-13ba2ff3a1a4.jpg

Oct 13, 2014 | 2005 Chrysler 300

2 Answers

Replacing a alternator belt on a 2002 kia spectra.... another belt in the way cant find what loosens the belt


Please let me know if you have questions, and thanks for using FixYa.

1.8L Engine
A/C Compressor-Power Steering Pump Belt


NOTE Refer to the accompanying illustration for bolt and nut locations.

  1. Loosen bolt A , nut B and nut C
  2. Loosen tension adjusting bolt D
  3. Remove the drive belt

To install:

Route the belt over the pulleys.
jturcotte_1369.gif

Fig. Removing the A/C and P/S pump belt-1.8L engine


  1. Tighten bolt A and nuts B and C, as follows:
    1. Bolt A: 27-39 ft. lbs. (37-53 Nm)
    2. Nut B: 14-19 ft. lbs. (19-25 Nm)
    3. Nut C: 24-34 ft. lbs. (32-46 Nm)

  2. Check the belt tension and adjust as necessary.

Alternator Belt
  1. Remove the A/C and power steering pump belt, if equipped.
  2. Loosen the alternator mounting bolt and adjusting bolt.
  3. Remove the alternator belt.
jturcotte_1370.gif

Fig. Alternator belt-1.8L engine



To install:

  1. Install the alternator belt and adjust, as outlined earlier.
  2. Tighten the bolts, as follows:
    1. Mounting bolt: 27-38 ft. lbs. (37-52 Nm)
    2. Adjusting bolt: 14-18 ft. lbs. (19-26 Nm)

  3. Install the A/C and power steering pump belt, if equipped.
  4. Check the belt tension and adjust as necessary.

Mar 30, 2011 | 2001 Kia Spectra

3 Answers

How do you remove the alternator on a 2001 continental


2001 Lincoln Continental 4.6L engine

Alternator replacement

1. Disconnect negative battery cable

2. Drain radiator coolant until coolant has drained from overflow bottle

3. Disconnect overflow hose at bottle

4. Remove 2 top power steering reservoir bolts and position reservoir out of the way

5. Disconnect coolant level sensor and bottom hose from coolant overflow bottle

6. Remove retaining nut and bolt

7. Remove coolant overflow bottle

8. Remove drive belt

9. Remove 4 fasteners from top alternator bracket and remove bracket

10. Remove attachment bolts and alternator from vehicle

11. To install reverse proceedure

12. Fill radiator and overflow bottle

13. Bleed air from cooling system

Feb 26, 2011 | Lincoln Continental Cars & Trucks

1 Answer

Changing alternator



REMOVAL & INSTALLATION 2.2L Engines
CHRYSLER ALTERNATOR

  1. Disconnect the negative battery cable.
  2. Label and disconnect the wiring (for easy installation).
  3. Remove the air conditioning compressor drive belt, if equipped.
  4. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt.
  5. Remove the bracket and mounting bolts.
  6. Remove the pivot bolt and nut.
  7. Lift the alternator from the vehicle.

When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary.
To install:
  1. Position the alternator against the engine.
  2. Install the pivot bolt and nut.
  3. Install the mounting bracket bolts, and adjusting bolt.
  4. Install drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

BOSCH ALTERNATOR
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the air conditioning compressor drive belt.
  4. Loosen the alternator adjusting bracket locknut and adjusting screw. Remove the alternator belt.
  5. Remove the bracket locknut and mounting bolt.
  6. Remove the pivot bolt and nut.
  7. Remove the alternator from the engine.

To install:
  1. Position the alternator against the engine.
  2. Install pivot bolt and nut.
  3. Set the mounting bracket in place and install the bracket mounting bolt and locknut.
  4. Install the drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

Jan 02, 2011 | 1994 Plymouth Voyager

1 Answer

How do you take the alternator off for a 96 plymouth neon


For REMOVAL & INSTALLATION check this procedure...
  1. Disconnect the negative battery cable.
  1. Loosen, but do not remove the alternator adjusting nut.
  1. Turn the front wheels completely to the right, then raise and safely support the vehicle.
  2. Unfasten the retainers, then remove the plastic lower splash shield.
  1. Unfasten the alternator field circuit wiring connector. You must squeeze the locking tab to release it.
  1. Remove the B+ terminal nut and wire.
  1. Loosen the alternator pivot bolt, but do not remove it.
  1. Remove the alternator drive belt. The alternator spill shield does not have to be removed.
  1. If necessary, remove the bottom pivot bolt and anti-rotation tab.
  1. Unfasten the three mounting pivot bracket bolts, then remove the pivot bolt and bracket.
  2. Holding the alternator in one hand, remove the adjustment nut then slide the alternator off the T-bolt. The T-bolt does not have to be removed. Lower the alternator and remove through the wheel well.
To install:
  1. You may need to use a C-clamp to drive the sleeve into the mounting ear for installation clearance.
  2. Position the alternator in the vehicle, sliding it onto the T-bolt. Install the adjusting nut.
  3. Install the bracket and pivot bolt, then install the three mounting pivot bracket bolts. Tighten the bolts to 40 ft. lbs. (54 Nm).
  4. If removed, install the anti-rotation tab and bottom pivot bolt hand-tight.
  5. Install the alternator drive belt.
  6. Tighten the alternator pivot bolt to 40 ft. lbs. (54 Nm).
  7. Install the B+ terminal wire and nut. Tighten the nut to 75 inch lbs. (9 Nm).
  8. Attach the alternator field circuit wiring connector, making sure the locking tabs are engaged.
  9. Install the splash shield, then carefully lower the vehicle.
  10. Tighten the adjusting nut.
  11. Connect the negative battery cable. Adjust the alternator belt.

Hope helps.

Jul 16, 2010 | 1996 Plymouth Neon

1 Answer

Changing alternator


REMOVAL & INSTALLATION
2.2L Engines
CHRYSLER ALTERNATOR
  1. Disconnect the negative battery cable.
  2. Label and disconnect the wiring (for easy installation).
  3. Remove the air conditioning compressor drive belt, if equipped.
  4. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt.
  5. Remove the bracket and mounting bolts.
  6. Remove the pivot bolt and nut.
  7. Lift the alternator from the vehicle.
When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary.

To install:

  1. Position the alternator against the engine.
  2. Install the pivot bolt and nut.
  3. Install the mounting bracket bolts, and adjusting bolt.
  4. Install drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

BOSCH ALTERNATOR

  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the air conditioning compressor drive belt.
  4. Loosen the alternator adjusting bracket locknut and adjusting screw. Remove the alternator belt.
  5. Remove the bracket locknut and mounting bolt.
  6. Remove the pivot bolt and nut.
  7. Remove the alternator from the engine.
To install:
  1. Position the alternator against the engine.
  2. Install pivot bolt and nut.
  3. Set the mounting bracket in place and install the bracket mounting bolt and locknut.
  4. Install the drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

2.5L Engines
2.5L engines were equipped with either Chrysler or Bosch alternators.

  1. Disconnect the negative battery cable.
  2. Remove the drive belts.
  3. Remove the adjusting bracket-to-engine mounting bolt.
  4. Remove the adjusting locking bolt and nut, then remove the mounting bracket.
  5. Position the alternator to gain access to the wiring.
  6. Disconnect the wiring and label for easy installation.
  7. Remove the pivot bolt, nut, and washers.
  8. Remove the alternator assembly from the engine.
To install:
  1. Position the alternator assembly against the engine.
  2. Loosely install the pivot bolt, washers, and nut.
  3. Attach all wiring connectors to the alternator.
  4. Position the mounting bracket in place, then install engine mounting bolt.
  5. Loosely install the adjusting locking bolt and nut.
  6. Install the drive belts, and adjust to specification.
  7. Tighten all mounting bolts and nuts.
  8. Connect the negative battery cable.

2.6L Engines
2.6L engines were equipped with Mitsubishi alternators.
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the adjusting strap mounting bolt.
  4. Remove the drive belts.
  5. Remove the support mounting bolt and nut.
  6. Remove the alternator assembly.
To install:
  1. Position the alternator assembly against the engine, then install the support bolt.
  2. Install the adjusting strap mounting bolt.
  3. Install the alternator belts and adjust to specification.
  4. Tighten all the support bolts and nuts.
  5. Connect all of the wiring terminals to the alternator.
  6. Connect the negative battery cable.

3.0L Engines
The 3.0L engines were equipped with either the Nippondenso or Bosch alternators.
  1. Disconnect the negative battery cable.
  2. Install a 1 / 2 in. breaker bar in the tensioner slot. Rotate counterclockwise to release belt tension and remove poly-V belt.
  3. Remove the alternator mounting bolts (2).
  4. Remove the wiring and remove alternator.
To install:
  1. Position the alternator onto the engine, then install the wiring.
  2. Set the alternator against the mounting bracket and install the mounting bolts.
  3. Rotate the tensioner counterclockwise and install poly-V belt.
  4. Connect the negative battery cable.

3.3L and 3.8L Engines
The 3.3L and 3.8L engines were equipped with the Nippondenso alternators.
  1. Disconnect the negative battery cable.
  2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner.
  3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it.
  4. Remove the alternator tensioner/power steering bracket bolt.
  5. Remove the tensioner stud nut and remove the tensioner.
  6. Remove the alternator mounting bolts.
  7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way.
  8. Remove the alternator support bracket bolts. Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine.
  9. Remove the alternator from the engine and disconnect the electrical leads.
To install:
  1. Install the alternator in position on the engine and connect the electrical leads.
  2. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm).
  3. Install the power steering reservoir on the mounting bracket.
  4. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm).
  5. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold.
  6. Install the alternator belt, insert a 1 / 2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt.
  7. Connect the negative battery cable.

Hope this help (remember comment and rated this).

Apr 01, 2010 | 1994 Dodge Caravan

1 Answer

Where are the ajustment screws for headlights on 2001 nissan pathfinder


They have large are lug nuts on the top n side of some others have tiny ones accessed thru the radiator grill around the head light areas Depends on the year of build. Steve in the UK

May 12, 2009 | 2001 Nissan Pathfinder

1 Answer

Can not remove the alternator on my 2001 Santa Fe The main pivot bolt at bottom of alternator seems to be long and can't be pushed back through the hole in alternator base enough to allow the alternator to...


The mounting bracket where that long bolt goes through is slotted. By loosing the the nut on it slightly, then ply the alternator up out of the mount( nut and bolt still attached to the alternator ).

Apr 08, 2009 | 2001 Hyundai Santa Fe

4 Answers

Removel of altanator on 2001 nissan pathfinder


Disconnect the battery - both positive and negative terminals and remove battery from holder (better access that way). From underneath - remove the plastic shield underneath the front of the car. It is held on by a few bolts. Remove the upper radiator hose (some coolant will drain out). Also free the cable from the support bracket on the top of the platic fan housing. There is an overflow hose that is also clipped to the fan housing unlcip the hose and move it out of the way. From underneath, push in on the clips and the lower half of the fan housing will come out of the bottom. From the top - remove the two bolts holding the upper part of the fan housing and you should be able to work it out from the top. You should now have better visibility and access to the alternator. Loosen the belt tensioner (from below) and remove the belt. There are two mounting bolts on the alternator, a long one through the alternator and a second on the "dog ear" of the alternator. Once the alternator is free - you can get at the battery cable post and the other wires. The wiring harness can be removed by pressing in on the locking clip. Most difficult is the wiring harness support bracket. A short 10mm wrench can get to it. The alternator is now free but will have to be manipulated forward so that it sits below the fan. Once there - you can reach down from the top, and pull the alternator into the larger gap between the fan blades. While rotating the fan, bring the alternator around with it to the top and it will come out. To reinstall -- do everything in reverse. I recommend replacing the belt so you don;t have to do this again.

Feb 13, 2009 | 2001 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...