Question about 2005 Pontiac Montana SV6

1 Answer

How to replace head light - 2005 Pontiac Montana SV6

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Pontiac Master
  • 5,370 Answers

The headlight replacement procedure.:---

  • Apply the parking brake and open the hood.The head is attached by thumb shaped screw.You will see the thumb screw on the upper inboard corner of the turn signal assembly Remove the screw with the screwdriver.Pull the turn signal assembly outward away from the fender and then disconnect the bulb.Turning the socket and wire 1/4- counterclockwise. Set the turn signal assembly aside.Disconnect the electrical connector plug from the headlight being replaced. Lift up on the blue retaining clip of the plug and pull it away from the socket of the headlight.Turn the black retaining collar of the headlight counterclockwise to remove it and the headlight from the headlight assembly.Install the new headlight by reversing the procedure.Replace the turn signal bulb into its assembly and reinstall the assembly and thumbscrew.


  • Posted on Nov 12, 2010


    1 Suggested Answer

    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    A 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    Good luck!

    Posted on Jan 02, 2017


    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    2 Answers

    My 1989 gmc serra the head lights don't light the road to well is there something I can do ? different type of bulb

    dull head lights cab be from several things
    1-bad reflectors behind the bulbs --any yellowing, rusting or dull reflector surfaces -- replace head light assemblies
    2 badly aligned head lights-- beams shining off into space instead of on the road. --- have an alignment done on the lights
    3 wet roads do not reflect head lights properly so it appears that the lights are not working well--- not much to do. the light reflects forward of the wet surface and not back to the driver
    4 only one head light or no main beams and running on low beams only--- check light operation and check light control module for operation

    Feb 21, 2015 | 1989 GMC Sierra

    1 Answer

    How do I replace head light bulb on lexus es 330

    need to remuve the 4 bolts an remuve the head light assembly then replace the head light bulb

    Sep 04, 2014 | Cars & Trucks

    1 Answer

    Why does my head light switch overheat when turned on?

    Replace the Head Light Switch

    Then take the old one apart,you will have your answer

    Aug 12, 2014 | 1992 Chevrolet K1500

    1 Answer

    Marker light replacement

    you have to remove head light housing to replace marker light.look in owners manual in glove compartment it will show you how to remove head light housing to replace head light or marker bulb.

    Jun 19, 2013 | Cars & Trucks

    1 Answer

    The passenger side head head light goes out and the replacement lamp on the dash lights up. After a while the headlight comes back on. I've tried replacing the head light and still experience the same...

    If you have an optional HID lighting kit, check/replace the ballast for the lights. If not, check for a wiring short in the harness somewhere.

    Jul 22, 2010 | 2004 Volvo S60

    1 Answer

    How to replace the front light bulb in my malibu do you need tools for this

    screw off the cover of the head light until it reach the head light then screw of the head light to be place out to the car then open the head light then replace the the light.

    Jul 22, 2009 | Chevrolet Malibu Cars & Trucks

    1 Answer

    Removing the head light from a 1997 pathfinder

    I replace my head light bulbs recently and it was easy.
    I think that you might have to replace the whole head light assembly in order to replace the glass.
    Hope this helps. I found the answer in the drivers hand book under light bulb replacement.

    Mar 12, 2009 | 1997 Nissan Pathfinder

    2 Answers

    My Head Light Motor Acts Weird!!!

    replace the head light motor gear stripped.

    Jan 04, 2009 | 1995 Pontiac Firebird

    Not finding what you are looking for?
    Cars & Trucks Logo

    460 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts


    Level 3 Expert

    79024 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8836 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides