Question about 2004 Ford F250

1 Answer

How to restart the engine after changing fuel filter?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Turn the key on and off several times and you will hear the fuel pump run for a few seconds. Do this 4 or 5 times and it will refill the system and the engine should start with no worries.

Posted on Nov 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine quit running while driving & will not restart.No noise or sputtering.Full fuel tank.


recheck filter is in correctly ---also check for fuel pressure pump may hum but it also has a filter in tank [protects pump]that may be clogged --carboned up egr valve will cause stall with no start as well as clogged cat converter ,

Jul 25, 2015 | 1993 GMC G2500

1 Answer

Loss of fuel pressure after start


There is a fuel rail on the engine . Check fuel pressure, also could be a dirty fuel filter. when was the last the fuel filter changed?

Nov 26, 2013 | 2001 Ford Taurus

1 Answer

While truck was running I disconnected a fuel relay to relieve pressure from fuel lines to change the fuel filter. Truck would not restart. Assumed fuel pump was bad . Replaced it along with in-tank filter...


Removing the relay would not releive the fuel pressure. Arc across the fuel relay terminals and jump start the fuel pump. Also check to make sure the fuel filter is properly installed.

Jan 07, 2011 | 2001 Ford Expedition

1 Answer

1999 Nissan Maxima, after sitting for a while the engine will start and run only for 1 or 2 sec then engine stops. Try to restart but engine just cranks, will not run. thanks, Roy


you either need fuel filter replacement or fuel pump. filter should be under the passanger rear in front of rear tire on frame rail, fuel pump is in the gas tank the tank needs to be removed for replacement i would try the filter first there only about 20 or 30 dollars and pretty simple to change

Oct 10, 2010 | 1999 Nissan Maxima

1 Answer

94 VW Golf. Starts and runs sitting, drive it about 10 mins and it just dies and won't restart. Have changed Coil, wires, plugs, cranck shaft sensor. Fuel Pump/Filter?


a)When you go to restart it does it die right after restart?
b)Does it die after you put it in gear after restart?
c)Doesn't restart at all?
Not sure if you changed fuel pump? If you did eliminate it from cast of characters.

If a & c engine main relay or fuel pump
If b torque converter clutch solenoid

Apr 16, 2010 | 1994 Volkswagen Golf

2 Answers

94 Blazer, 4.3L Vortec Engin runs fine for a


Could be a fuel issue, Start by changing the fuel filter, if that doesnt work you might want to drop the gas tank and check the strainer on the fuel pump and make sure the tank is clean.

Jan 20, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

'87 Silverado,5.7, Shuts down while driving


It sounds like you have a clogged fuel filter or the fuel pump maybe weak. I would change the fuel filter first and see what happens. Or you are having a distributer problem with the coil. Also check for a wire grounding out around the engine.

Jun 14, 2009 | 1985 Chevrolet S-10

2 Answers

2005 chevrolet k3500 6.6 duremax diesel with check engine codes po229 po300 po303 po304 came up after changeing fuel filter with water in fuel light came on also added fuel conditoner to fuel truck idles...


PO229 indicates tps circut inttermitent.
Po300 303 and 304 indicate missfires on cyl 3 and 4.. Was the fuel filter primed before starting the engine? If not ,remove and reinstall filter. Then prime filter with pump that is on fuel filter adapter. Once this is done restart and verify o/k

May 05, 2009 | 2005 Chevrolet Silverado 3500

Not finding what you are looking for?
2004 Ford F250 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...