Question about 1987 Honda Civic

Open Question

Head bolt torque specs for a 1987 honda civic dx 1.3L

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jamesmac
  • 71 Answers

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

7.3 ft.lbs Go from middle, to back right, to back left, to front right, to front left. if your standing in fron of your header.  11 or over usually shears the bolt.(if you have stock bolts)
Make sure you dap some rtv on the sharper 4 corners of the gasket where the cam seals are.

James Mac

Posted on Sep 13, 2008

  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

  • 1 Answer

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Posted on Jan 01, 2009

  • 14036 Answers

SOURCE: need torque spec. for 91 honda crx head bolts

47 FT LBS TORQUE.is for the 1.5 and 1.6 engines 2.2 is 78 ft lbs and the 2.0 -2.1 is 49 ft lbs. the crx engine is 47 ft lbs

Posted on May 03, 2009

outdoorsman5
  • 631 Answers

SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC

I have the specs and diagrams. If you want me to send them to you, give me your email address. Outdoorsman592003@yahoo.com

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the torque sequence for 95 honda civic dx 1.6 v-tec motor?


Torque sequence's are just common sence.
LOOK at the shape the lenght of the bolts tighten in the sequence that would be the best for the situation you are looking at .
Start in the middle most times never tighten all the way do it in steps bring it down evenly 3 to 4 times around every bolt incresing levels every time .
Use a torque wrench to finish.
If you are dealing with heads you will likely have to lossen and retighten to compress the gasket correctly

Mar 03, 2015 | Honda Cars & Trucks

1 Answer

Need torque specs for bolts on head of my 2000 civic LX 1.7 engine


alldata.com
and the sequence. not just torque.
make sure they are not TTY bolts. if yes, say so.
look it up, its 3 issues, not just throw it on.

Dec 06, 2013 | Honda Civic Cars & Trucks

1 Answer

Torque spec on head for 1986 civic si 1.5liter


Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...

Mar 10, 2012 | 1986 Honda Civic

1 Answer

What are the head bolt torque settings for a 95 honda civic dx 1.4


there is not a 1.4L listed in the 1995 civic dx there is a 1.5L and a 1.6L

1.5L

D15B7 & D15B8 engines
step 1 22lbs
step 2 43lbs

D15Z1 engine

step 1 22lbs
step 2 53lbs


1.6L VTEC

step 1 22lbs
step 2 53lbs

Sep 14, 2011 | 1995 Honda Civic

1 Answer

99 Honda civic 1.6 engine torque specs and sequences for cylinder head


Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
  1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
  2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

zjlimited_1681.jpg

Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

Hope helps.

Aug 05, 2011 | 1999 Honda Civic

1 Answer

Need torque specs for bolts on head of my 2002 honda civic ex v-tech 1.7 engine. just fixed them about a week ago and have to fix them again


Hello claudian1535,

Below is an image showing the torque sequence. The torque procedure is a three step process:

Step one torque all head bolts to 14 ft.lbs.
Step two torque all head bolt to 36 ft.lbs.
Step three torque all head bolts 49 ft.lbs.


netvan_116.png

I hope this helps.

Regards,

netvan

Jul 21, 2011 | Honda Civic Cars & Trucks

1 Answer

2000 honda civic sir 1.6 dual cam vtec head torque and head bolt location


The Head bolts are located below the cams, so you have to take the cams out to get to the bolts.
The torque specs for the head bolts in sequence is 20, 40, then end at 63ft lbs. Be sure to apply anti sieze or dip the head bolts in oil, before you torque them down or you might pull out the threads. (Not a good thing TRUST ME!)
Hope this helps.

Aug 10, 2010 | 2000 Honda Civic

1 Answer

Trying to replace ignition, trying to remove the old ignition.


This is not hard to do, first remove all the steering column plastic, then you'll see two bolts with no heads on them. Take a chisel and a hammer and loosen the bolts, counterclockwise. Install the same way except the new lock assembly will have reverse hex screws you torque down until the heads break off. good luck.

May 27, 2009 | 1994 Honda Civic

1 Answer

I have a 1990 honda civic. I just changed the head gasket I need to know the head bolts torque specs thank you. It is a D 15.


The book say to do it in 2 steps up to 48 ft-lbs. Personally, I would do it in 3 steps, 15, 35, and then 48. Start in the middle of the head and criss cross out to the ends, and repeat.

May 18, 2009 | 1991 Honda Civic

2 Answers

Replacing head gasket on 1995 honda civic, require torque specs and secquence


wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Sep 13, 2008 | 1995 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...