Question about 1999 Mercedes-Benz E-Class

1 Answer

Can my key be reprogrammed in the ignition - 1999 Mercedes-Benz E-Class

Posted by on

  • yadayada
    yadayada Nov 12, 2010

    If you check the onwers manual it will tell you no.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

The electronic key which you have only need to programme once, then it will work till get faulty not necessary to re programme there are only one way to re programme, it's only can do with new electronic ignition switch replacement so if you replace new ignition switch insert your key in it and it will take few minute for programme it take all the programme automatically then you can turn the key and start the car,
If you don't have replace the ignition switch but key is not working it's faulty either key or electronic ignition switch, if you have any other additional key if the car start with that key it's very clear it's faulty your key which is not working give me more details do you have the other key and only not working one key like that, however first replace the battery for your key and try if not work put a comment i will give you more details,

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 1995 Aurora after replacing a bad ign. Switch the the new switch needs to be reprogram. Is that something I can do my self?


How to Reprogram the Ignition Key for an Oldsmobile Aurora

www.ehow.com > Cars
How to Reprogram the Ignition Key for an Oldsmobile Aurora. The Aurora is ...Replace the ignition switch in a 2002 Oldsmobile Alero after a thorough trouble-shooting session to eliminate issues with voltage, shorts, faulty grounds... How to ...

How to replace an ignition switch in a Oldsmobile Alero ...

? 14:05
https://www.youtube.com/watch?v=5FKwU467PKU
Mar 10, 2012 - Uploaded by BuckeyeBryan
How to replace an ignition switch in a Oldsmobile Alero. ... Showmore ... How to diagnose a bad starter, ignition, neutral safety switch!

GM How to Replace Ignition Lock Cylinder - YouTube




Dec 15, 2015 | Cars & Trucks

2 Answers

How to reprogram porsche boxster key remote


Boxster key remotes are reprogrammed by put the key in the ignition turning the ignition on but not starting the car, then hold down the door lock on the remote for like 5 sec. Ta da... She's reprogrammed.

May 11, 2014 | 1999 Porsche 911 Carrera

1 Answer

Key reprogramming


The problem is you need to use OE ( original equipment )
Honda made their cars so that you need to buy from them not a wrecker...The ignition feeds to the computer, So using a screw driver will make life worse...The ignition cylinder is similer to what"s in your front door...

Nov 24, 2013 | 1996 Honda Civic

1 Answer

2005 honda civic ex, replaced ignition with used ignition. had new igntion key reprogrammed to car. reprogramming of key(s) successful. green key light will not go off with reprogrammed key and car will...


Even with the reprogrammed key's the engine would crank, it might not start but it would crank over so that leave's only one thing, your used ignition switch is bad.

Nov 24, 2013 | 1996 Honda Civic

1 Answer

2007 chevy cobalt will start but not stay running


problem in theft security system it has to be reprogrammed to new key new ignition switch key lock system. dealership fix need diagnostic eqquipment to reprogram new ignition key and ignition switch lock cylinder to the immobilizer control module and ECM.

Jan 26, 2013 | 2007 Chevrolet Cobalt Coupe

1 Answer

Lost key and alarm dodge caravan


to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.

Dec 17, 2012 | 2000 Dodge Caravan

1 Answer

Cant find my keys ... My emergency key lets me in but wont turn on ignition -_- ... 2009 AUDI A4 ... ...


TRY THIS IT MAY OR MAY NOT HELP.PUT KEY IN THE IGNITION SWITCH TURN IT TO ON POSITION WITH THE ENGINE OFF.LEAVE KEY ON POSITION THE IMMOBILIZER WARNING LAMP ILLUMINATES FLASHES.IF WARNING LAMP TURNS OFF IN 30 SECONDS TRY CRANKING CAR.SEE IF IT RUNS WITH OUT CUTTING OFF IF SO.THE AUDI DEALERSHIP HAS TO REPROGRAM THE NEW IGNITION KEY. WHILE THE KEY IN THE IGNITION SWITCH IN THE ON POSITION AND THE WARNING LAMP DONT STOP BLINKING THE DEALERSHIP HAS TO REPROGRAM KEY TO THE IGNITION SWITCH AND IMMOBILIZER.

Sep 23, 2010 | 2009 Audi A4

1 Answer

2004 Suzuki Verona won't start. Mechanic diagnosed a faultiy ignition switch. Worked on it all day and can't get it started. What could it be?


WELL IF YOU REPLACE KEY AND IGNITION SWITCH THEY WILL HAVE TO BE REPROGRAMMED BEFORE VECHICLE WILL CRANK AGAIN.YOU NEED A DIAGNOSTIC SCANNER TO REPROGRAM THE NEW KEY AND IGNITION SWITCH.

Jul 06, 2010 | 2004 Suzuki Verona

1 Answer

Car immobilisor


you might be able to reprogram the key, but you can only do this if you have two keys, what you need to do is put one key in the ignition turn the ignition on ( not over ) put the key that needs reprogramming into the drivers door and lock the vehicle with the key not the button, wait 10 seconds, remove the key, then press the unlock on the fobb, turn ignition off, remove key from ignition, put in the key that you just unlocked the car with and turn ignition do not turn over, turn off ignition,remove key wait 10 seconds, then put key back in then you should be able to turn it over as normal, if that does not work you will have to take key to be reprogramed at the main dealer...hope this helps

Feb 13, 2010 | 1995 Volkswagen Golf

1 Answer

Reprogram new ignition key ford focus


the system on this car may not allow for more than 2 keys

Nov 17, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
1999 Mercedes-Benz E-Class Logo

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...