Question about 2000 Ford Windstar

1 Answer

Where are the fuse box for fuel pump and relay box located. The van stalesall the time and will not start.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,763 Answers

I dont think it would be a fuse or relay, maybe the fuelpump but i would check the fuel pressure first, start with gauge connected and watch the pressure, if the pressure drops and then van stalls then you will know its the fuelpump, i ve never had a problem with the relay or fuse on these windstars, another problem would be the mass air flow sensor, this sensor goes bad often and will cause the problem you are having, another thing i would do before anything is to have the computer scanned for any codes, the computer stores codes when it sees theres a problem and the codes will tell you what is failing, go to an autopart store, many scan codes for free and see if you have codes that may help you. hope this is helpful.

Posted on Nov 12, 2010

  • compute1234 Dec 30, 2010

    Check the internet and you will find that the windstar has a very big problem with fuel pump relay and sometimes fuse. These inexpensive items are definately the place to start.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 ford e350 van fuse for fuel pump location


Fuel pump relay or a FPDM - fuel pump driver module , or the inertia fuel cut off switch was tripped . F150 Expedition No Start P1233 Fuel Pump Driver Module How to test an electric fuel pump no fuel psi testing Ford

Battery junction box , under hood ! Fuse # F13 20amp. The fuel pump relay is in same box . Do you know what a relay is ?

Mar 24, 2016 | Ford Cars & Trucks

1 Answer

Location of fuel pump relay switch in 1992 olds silloutte 3800


It is under the Hood, in the Fuse Box. Go to this web site and put in your information and you will see the diagram

www.bbbind.com

Apr 15, 2013 | 1992 Oldsmobile Silhouette

1 Answer

Replaced the Fuel Delevery System/Pump and the in-line fuel filter on my 93 GMC Vandura Van 2500. Van turnes over; however, no fuel in getting to the engine. I have checked the Fuel Pump...


install a fuel pump guage and check pressure at key on and start, it should hardly vary, it the pressure is constant check the injector signal with a noid light, while you are at it check spark(no spark no injector signal) you won't find a relay fuse

May 07, 2011 | GMC Vandura Cars & Trucks

1 Answer

1994 astro ext will not start


fuel pump relay is under the hood in the fuse/relay box. information is in your owners manual.
when was the last time you replaced the fuel filter, maybe its plugged?

Nov 02, 2009 | 1994 Chevrolet Astro

1 Answer

Van won't start, maybe fuel pump, where is it located, is there anything you can check before replacing to make sure it is fuel pump, what is the fuel relay.


You will need to find a junction box in the engine compartment where some fuses will be located. There should also be some relays in the fuse block. Under the cover should be listing of where relay is located. you can jump a sire across the pins in or to see if fuel pump runs. If it does then the problem is at the relay. If it doen't, problem is at the fuel pump. Problem with that is that the fuel pump is in the tank and the tank will need to be dropped in order to get to it. Good Luck

May 16, 2009 | 1995 GMC Safari

1 Answer

Need help on replacing a fuse on my van


fuse pump relay is under the hood in the main fuse box and labled fuel pump relay

Jan 24, 2009 | 2003 Ford Windstar

2 Answers

2005 Chevy express Fuel pump relay meltdown 6.0L


i need diagram for fuse box 1998 chevy van

Dec 12, 2008 | 2001 Chevrolet Express

1 Answer

Cranks but no start


There is no fuel reset button on this van.

To test the circuit before removing the tank, you will need a voltmeter or cheap test light. Disconnect the connector at the fuel tank. On the harness side, locate the gray wire (fuel pump wire). Connect the test light to a good ground. Have a helper crank the engine over. While engine is cranking, the gray wire should have power. If it does, and the pump is not turning on, then the pump must be bad and need replacing. If there is no power on the gray wire with engine cranking, the circuit is the problem, not the pump. Go back and find the fuel pump fuse in the junction block (the fuse relay block where the fuel pump relay is). Check the fuse, also check if there is power going to the fuse. This fuse should be hot at all times. The circuit goes from battery to pump fuse to fuel pump relay to gas tank and the fuel pump.

Aug 02, 2017 | 1995 Chevrolet Astro

Not finding what you are looking for?
2000 Ford Windstar Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...