Question about Hyundai Motor 1996 Elantra

1 Answer

Loseing water bubbles in rad - Hyundai Motor 1996 Elantra

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,403 Answers

Will try to help. is the radiator leaking onto ground? when you open radiator cap with engine running[careful very hot] is the coolant moving around? if so, it's circulating. in otherwords it's doing what it's supposed to do. is temp. light or guage hot? check for low coolant level. running hot all the time? check for bad thermostat.with motor off! check for wobbly fan, move it back and forth by hand to see if it has any play at all, if it has play, possible bad water pump.. hope this helps and thank you for choosing fixya.com

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you bleed the radiator on a 1993 dodge caravan?


Hi,just fill it up then leave the rad cap off when the water warms up the fermostat opens you will see bubbles and the water might go down top it up when you dont see anymore bubbles put the rad cap back on,run the engine up to running temp then let it cool down again then take rad cap back off and top up as needed and put rad cap back on job done,all the best.

Jan 21, 2016 | Dodge Cars & Trucks

3 Answers

I have a 96 Dodge Stratus. With 2.0 engine. Replaced water pump and now check engine light on pulling up code po1390 a timing code and it still bubbleing when i run it and losing water Did timing juup


Did you let it run with cap off for long time with heater on while you refilled system? Usually let rad fan come on and off 2 or 3 times with cap off to bleed system properly.

Apr 22, 2015 | 1996 Dodge Stratus

1 Answer

On my Suzuki gran vitara 2002 I am losing engine coolant from overflow pipe,,overheats after 20 mins of driving(once coolant tank empty),,recently had a new thermostat fitted...please help,,thankyou


you might have a blown head gasket, when the engine is cold remove the rad cap start the engine and look for air bubbling into the rad , if you see said bubbles then you need to have the head gasket replaced. PS Do not remove the rad cap when the engine is hot as you could be seriously injured/burnt

Mar 03, 2015 | Suzuki Grand Vitara Cars & Trucks

1 Answer

Water/coolant is being pushed in the expansion bottle,


Sorry almost certainly your head Gasket, sound like a break between a cylinder and the water jacket - hence the bubbles.

Jan 30, 2014 | Cars & Trucks

2 Answers

Hi, My 95 2.8 Pajero (turbo deisel) has been overheating. I have replaced the thermostat, water pump and the rad cap (rad replaced 2 years ago) and still it is boiling over into the expansion bottle. When...


Just a guess but I think their diagnosis was that the head and head gasket was not leaking and not a source of the bubbles you spoke of.
Usually when the head or head gasket is leaking, a unusual amount of water will will be expelled from the tail pipe.

Jan 19, 2013 | 1995 Mitsubishi Montero

1 Answer

My 99 Audi A4 resevoir is bubbling, had the water pump and timing replaced a month ago anything????


1. Possible air lock in the cooling system, does the internal fan blow hot air? You can blead the system through small bleeding points on the water hoses.

2. Head gasket gone, do the water pipes to the rad expand under pressure?

3. Faulty thermostat. Thermostat controls the amount of water directed to the rad.

4. Not enough anti freeze.

5. Rad cooling fan not starting when supposed to causing overheating. Does the tempture gauge in the dash read normal.
Let me know how it goes.

Sep 05, 2012 | Audi A4 Cars & Trucks

2 Answers

Head gasket


depends where its blown if your oil is milky looking and thick or it blows out all of your coolant if you have rad cap of ff you will see bubbles in rad either will indicate a bad gasket

Apr 20, 2010 | 1992 Cadillac DeVille

2 Answers

1997 Firebird over heating


Hi could be a thermostat or a head gasket
take the rad cap off a start the car see if there are bubbles in the rad if there are no bubbles then change the thermostat if there are bubbles then good chance it's a head gasket

May 11, 2009 | 1997 Pontiac Firebird

2 Answers

2000 Dodge Durango


Have you checked your rad fans? Rad flow? Rad condition? Possible water pump problem if those check out good.

Sep 26, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
Hyundai Motor 1996 Elantra Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...