Question about 1999 Chevrolet Malibu

1 Answer

I am looking for port to use OBD II tool I can not seem to find it. Any idea where I can find it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

On GM and Fords it's on the lower left hand corner of the dashboard, underneath the dash. You may have to look closer to find it.
There may be a plastic cap on it concealing it from view.

It should be there:

Diagnostic Link Connector Fig. 1: The OBD-II compliant Data Link Connector (DLC) is located under the driver's side of the instrument panel I am looking for port - 91144p39.jpg
Fig. 2: A Tech 1® , or equivalent scan tool must be used to retrieve codes from the 16-pin DLC connector 88254gc8.gif
These vehicles are equipped with a Data Link Connector (DLC) which is the 16-pin connector that you attach the scan tool to read and/or clear Diagnostic Trouble Codes (DTCs). The DLC is located under the driver's side of the instrument panel. prev.gif next.gif

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where is the obd port


If your car is equipped with obd, look under the dashboard for a plug receiver, usually on the driver side.

Mar 06, 2015 | 1991 Toyota Pickup

Tip

Where are fuses and OBD port in Toyota Avensis II 2003-2009


Having trouble locating fuses or OBD port in Toyota Avensis II 2003- 2009 T25? Here's a simple video guide that will help you find fuses and OBD port location.

on Feb 04, 2015 | Toyota Avensis Cars & Trucks

2 Answers

Looking for the diagnostic plug location on a 1993 525 it


SORRY, FOR 1993 BMW, THERE IS NO PLUG FOR DIAGNOSTIC TOOL,
or you can ask the 24 hrs live technical support http://www.diyobd2.fr/ they will like to help you, good luck

Sep 15, 2013 | BMW Cars & Trucks

1 Answer

My 2002 Mazda Protege Lx will buck while traveling along, not too often. I suspect the Electronic Control Module for the Transmission or possible sensors for the module. Where is the module and sensors...


Look near the driver's area under the dash for a an OBD-II port and borrow a scan tool from Autozone (they do tool rentals, cheaper than buying one). Pulling the codes will give you an idea of what is going on, you can then work from there.

http://upload.wikimedia.org/wikipedia/commons/8/85/OBD_002.jpg

Aug 01, 2011 | 2002 Mazda Protege

2 Answers

Where is the OBD port located in a toyota hiace 1998 with 1KZ engine and is it a OBD II?


It is OBD II all cars world-wide were required to be OBD II by the 1997 model year. The port should be located under the dash on the drivers side of the car. It looks like a serial port on the back of a home computer.

Mar 01, 2011 | Toyota Passenger Cars & Trucks

1 Answer

I am trying to connect a scanner ob2 to check engine light that is on but not reading also tried taking positive cable off battery then drove it for 30 min light still on what can i do


1996 is the first year that OBD II was mandated. Some cars will have the OBD II port but not be OBD II compliant. Does it have the 12 pin port or the 16 pin port?

Feb 01, 2011 | 1995 Pontiac Bonneville

2 Answers

How I reset the 'check engine light' on 2009 mercury mariner?


There are 2 ways to do this. The first is to disconnect the battery and let it sit for 60 seconds. The other is to use a scan tool to clear the codes. The light will come back if you haven't corrected the problem though. I would recommend going to an autozone and getting them to scan and find the code for you. You may need to replace a component in your emissions system. I hope this helps.

Dec 04, 2010 | 2006 Mercury Mariner

1 Answer

How to reset the "Check Engine Light" on my 2003 Cadillac STS


Your car is equipped with an OBD II system and requires and OBD II scan tool to reset the check engine light. There is a port under the dash that it hooks to.

A very basic tool is available from a variety of places for about $20.(i.e ebay, Harbor Freight)

Jul 27, 2009 | 2003 Cadillac Seville

1 Answer

Just bought a 97 Kia Sephia RS - OBD-II Problem


that usually means that the fuse for the DLC port is blown. if you check your owners manual look for fuses labeled AUX, CIGAR, DATA, DLC. it is usually one of those that the DLC is fused through. i encounter this frequently as i do emissions inspections. check the fuses and you should find the culprit there!

Feb 20, 2009 | 1997 Kia Sephia

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

997 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...