Question about Toyota Tacoma

1 Answer

O2 sensor bank 1 sensor 2 replacement instructions 2004 toyota tacoma v6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,826 Answers

LOCATIONS There are different locations in the exhaust system where O2sensors are positioned. The locations have been given numbers and will be used in the accompanying charts to identify the positions of O2sensors in most vehicles. Due to mid-year production changes or factory inconsistencies, all models may not be covered. If a vehicle being serviced is not covered in the charts, inspect the exhaust system (while cold!) in the general locations to find the applicable O2sensors. NOTE: If equipped with dual exhaust systems, there may be up to 4 or 5 O2sensors in the exhaust system. Be sure to locate all of them before commencing with any testing or service. Fig. 1: Location No. 1 - down pipe o2 sensor bank 1 sensor - 79248g01.gif
Fig. 2: Location No. 1 - typical O2sensor located in the exhaust manifold 79248g04.gif
Fig. 3: Location No. 2 - left and right banks of a V-type engine 79248g02.gif
Fig. 4: Location No. 3 - exhaust collector (where more than 1 pipe joins together) 79248g05.gif
Fig. 5: Location No. 4 - outlet of the catalytic converter 79248g06.gif
Fig. 6: Location No. 5 - inlet and outlet of the catalytic converter 79248g03.gif
o2 sensor bank 1 sensor - 93028c01.gif93028c01.gif
93028c02.gif
prev.gif next.gif

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How many o2 sensors In 2002 toyota camry?


my son's solara which has same engine has three. two before cat and one after.

May 22, 2015 | 2002 Toyota Camry

3 Answers

Anyone have a diagram of a 2004 Toyota Tacoma Prerunner 3.4L 2wd o2 sensor UPSTREAM Bank 1 sensor 1 ??


It should be easy to find. It is between the exhaust manifold and the converter.

Mar 13, 2015 | Toyota Cars & Trucks

1 Answer

What does toyota codes PO037 and PO136 mean?


P0037 is "Heater Control Circuit Low Bank 1 Sensor 2".
P0138 is "Oxygen Sensor High Voltage".

It sounds like it's time to check the connector to your oxygen sensor, and probably replace it (the O2 sensor).

Jul 26, 2014 | 2003 Toyota Tacoma

1 Answer

O2 sensor?


O2 sensors are always after the cat converter and HO2S sensors are always before the cat converter.
p0135 refers to heated oxygen sensor(HO2S) 1 bank 1-heater control--circuit malfunction
If it is a straight 6 cylinder engine with 2 cat converters it will be the sensor before the cat converter that connects to the manifold from pistons 1.2.3
If it is a V6 it will be the sensor that is in front of the cat converter that connects to the rear bank pistons 1.2.3. Use the special socket when removing/replacing the sensors to prevent wiring damage

Apr 23, 2014 | 2004 Chevrolet Silverado 2500HD

2 Answers

CODE P1130 ON TOYOTA CAMRY V6 YEAR 1999


Sounds like there is an issue with the heater on the bank 1 sensor 1 O2 sensor. Bank one is the same side of the engine as the number one cylinder and sensor one is always before the catalytic converter. Check for battery voltage on the black with yellow wire with the key on. There should be twelve volts. Check the heater circuit of the O2 sensor with an ohm meter. Unplug the O2 sensor connector and measure resistance on the sensor side of the connector that the blue with black and black with yellow wire go to. Off the top of my head it should be around 14 ohms. You can confirm this by checking the heater circuit on the bank 2 O2 sensor. If there is voltage and the heater circuit doesn't ohm out than replace the O2 sensor. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 20, 2012 | Toyota Cars & Trucks

1 Answer

Bank one sensor one is located on what side of a v6 engine 2003 tacoma 2wd prerunner


bank one is always the side of the engine where number 1 cylinder is. Right Front (passenger side)

Sep 08, 2011 | 2003 Toyota Tacoma

1 Answer

My 2000 Toyo. Tacoma Prerunner TRD V6, truck Failed smog due to the part #3 Functional Computer Tests due to an erased MIL. But had passed the Visual Inspection, and Emissions. So i bought a Code reader...


there are 2 sensors in the system
one is a heated oxygen sensor (HO2S) in the exhaust manifold / pipe before the cat converter that reports the exhaust gas composition to the ECM so that fuel/ air ratios can be adjusted
if that one is faulty it is most likely the reason for running lean or rich
the second sensor is the oxygen sensor (O2) which is after the cat converter and reads the results of the cat converter cleaning the exhaust
you may have to replace both the sensors to get a clearance or replace the cat converter as well as the HO2S unit

Jun 02, 2017 | 2000 Toyota Tacoma PreRunner

1 Answer

2002 Tacoma: egr valve in 2002 tacoma...


V6 5vzfe Tacoma's does not have EGR valves. All the controlling is compensated by the o2 sensors; therefore, the o2 needs to be replaced at 100K to avoid a bad CAT converter.

May 18, 2010 | 2002 Toyota Tacoma

2 Answers

Changed both o2 sensors and front catalytic converter 2001 v6 tacoma 4wd dbl cab check engine light came back on initial scanner diagnosis catalytic efficiency bank 1 any ideas? could it be back converter


if the converter was bad the engine would loose power . alot of times the check engine light will come on for the emmitions check youre gas cap some vehicles will send a signal to the computer if the co is not right and by changing the gas cap solved the problem .

Nov 14, 2009 | 2001 Toyota Tacoma

2 Answers

Have p0130 and p0133 codes 98 toyota tacoma


check the mass air flow sensor there maybe dirt on the filiment inside the sensor causing false readings. cleaning or replacing it may make the codes go away.

Oct 28, 2009 | 1998 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...