Question about 2000 Mitsubishi Eclipse

1 Answer

2000 Eclipse Security Code

I recently had to disconnect the battery on my 2000 Eclipse RS, and apparently this deactivates the radio until a 4-digit security code is entered. My question is, are all codes for this model the same, and if they are, does anyone have it?

Posted by on

  • barrs91 Oct 25, 2008

    I have 2003 Eclipse an the battery died it was used car an do not have radio codes

  • Anonymous Mar 21, 2014

    radio doesnt work

×

1 Answer

All you have to do is call a local mitsubishi dealer and ask for parts department and ask for the code. but first you must remove your stereo and serial number and i forget what she called the other number, just dont do what i did and just randomly enter wrong numbers your radio will lock up and i dont know what to do now

Posted on Jul 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio code


  • The 4-digit code for your radio is listed on the two radio security cards supplied with the vehicle.
  • Enter the code by using the pre-set buttons numbered 1 to 6 and a "beep sound" occurs.
  • If the code is not properly entered, then begin the code entry again, starting with the first digit. If the code is not properly entered in three successive attempts the radio will not accept any entry until the radio has been left on for one hour (the radio display will show the word 'WAIT'). After one hour in the 'on' position the radio will accept three additional entries.

Note: Should you lose your radio security cards, contact your Jaguar Dealer, who for security reasons will require proof of vehicle ownership.

I hope this info helps!

~subyguru~

Mar 31, 2012 | 2000 Jaguar S-Type

1 Answer

Battery went dead, jumped to start, now radio won't play, word CODE came up in little screen above radio, Help


it is most likely that the radio had an anti theft security code activated & until you re activate the code the radio will not work......hope this helps.......cheers.

Sep 08, 2011 | 2000 Mitsubishi Eclipse

1 Answer

I need unlock code after batt was disconnected. 2000 AudiA4


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

Or you can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2000 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!



Please do rate my response. Thanks!

Mar 07, 2011 | Audi A4 Cars & Trucks

1 Answer

2000 Chevrolet Lumina Unlock radio code


If you have the security code it's easy. The code is something that either you or a previous owner entered. If you don't have the security code a trip to the dealer will be in your future.


Unlocking the Theft-Deterrent Feature After a Power Loss

Enter the code as follows; pause no more than 15 seconds between steps.

  1. Turn ON the ignition. LOC will appear on the display.
  2. Press MN and 000 will appear on the display.
  3. Press MN again to make the last two digits agree with your code.
  4. Press HR to make the first one or two digits agree with your code.
  5. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure.

Entering the incorrect code eight times will cause INOP to appear on the display. Wait an hour with the ignition in the ON position before you try again. When you try again, you will have three more chances (eight tries per chance) to enter the correct code before INOP appears.
Deactivating the Theft-Deterrent Feature

Enter the code as follows; pause no more than 15 seconds between steps.

  1. Turn the ignition to ACC or ON.
  2. Turn OFF the radio.
  3. Press the 1 and 4 buttons together. Hold them down until SEC shows on the display.
  4. Press MN and 000 will appear on the display.
  5. Press MN again to make the last two digits agree with your code.
  6. Press HR to make the first one or two digits agree with your code.
  7. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show -- -- --, indicating that the radio is no longer secured.

Entering the incorrect code will cause SEC to appear on the display. The radio will remain secured until the correct code is entered.

Dec 27, 2010 | 2000 Chevrolet Lumina

1 Answer

I need your help! I have a 2000 mitsubishi eclipse and the radio went dead after I changed the battery. the radio information is "MR 337271" and the serial # is "98235158A" Thanks


Most of these cars have a theft protection on them so when you disconnected the battery its possible that it triped the theft protection . and if so there is a code to reset the radio, this code is usually in you owners manual and if not you will have to go to a dealer to have it done. Hope this helps you.

Feb 27, 2010 | 2000 Mitsubishi Eclipse

2 Answers

I have the code but don't know how to use it it unlock my radio anti theft system for a 1997 misubishi eclipse. help!


I have disconnect the battery from my mitsubishi eclipse rs 99 and now the radio ask me for a code I never remove from the car what can I do or how I can get a free code for my car

Jan 08, 2010 | 1997 Mitsubishi Eclipse

2 Answers

I have a 2000 mitsubishi eclipse and my battery died. now i need the radio code. can anyone help?


With my mitsubishi eclipse there was a little red card with a security code on it and i kept it in with the owners manual and everything,but if you don't have one of those call the dealership...

Oct 14, 2009 | 2000 Mitsubishi Eclipse

3 Answers

I have a 2000 eclipse had a dead battery and now radio is saying


You need to call Dealer or stop at one to get proper code for your radio.You can check owners manual for reprogramming instructions.If not there I would suggest googling it.

Oct 03, 2009 | 2000 Mitsubishi Eclipse

1 Answer

Changing battery 2001 Lumina and radio lock up.


someone (hopefully you) set the 3 or 4 digit security code on the radio. when power is disconnected, like if someone steals your radio, the radio locks and cannot be used. the code can be from 000 to 1999. the hour and minute buttons are used to enter the numbers. 2000 choices - good luck
to unlock the system:
1 turn on ignition - LOC will appear
2 press MN and '000' will appear
3 press MN again until you see the last 2 digits of the code you want to try
4 press HR until you see the first 1 or 2 digit of the code you want to try
5 press AM FM
6 SEC will appear if you got it right - LOC will show if you got it wrong
good luck

Sep 26, 2009 | 2000 Chevrolet Lumina

1 Answer

I have a hyundai sonata classic 2000 model disconnected the battery lead to clean them, now the radio will not work I have a security code but not sure how I put it in to radio


Once you turn on the unit, "1 CDE" will appear on the LCD. Then using preset button 1~4 enter the 4 digit security number supplied on security card. After confirming the number, press preset button 5. This should unlock the player. If the incorrect code is entered "2 CDE" will appear on LCD and if incorrect code is entered again, "3 CDE" will appear on LCD. If, after the third attempt, the code is incorrect, the set will turn off. Wait 1 hour before re entering a security code.

Aug 26, 2008 | 2000 Hyundai Sonata

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

Related Topics:

558 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...