Question about 1998 Chevrolet K1500

1 Answer

I have a misfire code on #5 cyl. in a 1998 chevy full size 6 cyl. What would the fix be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

The most likely fix is going to be a plug wire or plug. pull cyl 5 plug look closely at the insulator wear boot goes on see if you see marks look like a pencil wrote on it this is called carbon tracking and indicates the fire running down the plug and look at wire for any burn spots. you most likely just need a tune up.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am having trouble fiquiring out which wire goes to which plug. The wires are different lengths and the correct wire length has to go specifically with the correct plug. I have the firing order dia


The firing order is 1-2-3-4-5-6
Cyl #1 is front left when looking at engine front to back
left coil pack connects to cyls. 5-2
center coil pack connects to cyls. 3-6
right coil pack connects to cyls. 4-1
It doesn't matter which connector on the coil you use just that the cylinder is connected to the proper coil pack (the coil fires both plugs at the same time, twice per each full 4 stroke cycle)
1998 Chevrolet Lumina
3.1 liter V-6 VIN "M" 94760154.gif

7aedc9b8-0448-4420-b824-420afd929143.gif

Dec 20, 2013 | 1998 Chevrolet Lumina

1 Answer

1998 Toyota T 100 6 cyl. 2 wheel drive Autozone found Error codes 300,304,306 listed with them as: 300 multiple misfire 304 cylinder 4 misfire 306 cylinder 6 misfire Chilton's Toyota list as: 304...


I would go with the ones autozone gave to you.then I would check the coil packs for those 2 cylinders and see if that's the problem. If that ain't the problem then I would check the crank sensor

May 26, 2011 | 1998 Toyota T100

2 Answers

1998 Park Avenue: it may not be getting fuel how can i verify this??...


the easiest and fastest way is to listen for pump activation when you turn you key to the on posistion turn your radio off turn the key to on (just before the point of starting)and you should be able to hear the humming or vibrating if you dont then you are not getting fuel. if the pump is working or you cant tell if it is go to the fuel rail look foe a cap that looks like a valve stem cap take this cap off and push the stem in if you get fuel then you know that you donthave a fuel problem if you dont get fuel to the rail then its probably the pump. hope this helps you.

May 07, 2010 | 1998 Buick Park Avenue

2 Answers

1998 F150 Standard Cab Full Size with 4.2 Six Cyl and Four Wheel


Obviously, 1. the air filter, Don't clean it, replace it if it has not be replaced lately.
2. The fuel injectors, have them cleaned and calibrated.
3. Fuel pressure in the fuel rails, have it tested for too high pressure
4. Air flow sensor...test
5. Download and analize fault codes from ECM.
Other engine sensors such as the O2 sensors may be involved and should show up in the OBD (diagnostics)

Apr 03, 2010 | 1998 Ford F150 Regular Cab

1 Answer

Check Engine Light coming on


get the soft ware up grade. and have the coils checked.

Mar 03, 2010 | 2002 BMW Z3

1 Answer

BMW Z3 rough idle on start codes read P1189 , P0173


all the codes you have are all related to the fuel trim, this problem needs to be looked at with a european capable scanner for futher tests sorry.

Dec 05, 2009 | 1999 BMW Z3

1 Answer

76 P0306 Misfire Cyl. 6 Or Random Misfire


hi my name is mark, to reset that all you do is pull positve cable off battery and that will reset the ecm. you might check your plug wires for loose connections.

Mar 16, 2009 | 1998 Honda Civic

1 Answer

Hi, could someone help me with the firing order of a 1990 Chevy Lumina power pack, please. Thanks


You didn't say what size engine you have, 4cyl. or 6 cyl.
The 4 cyl. is--- 1-3-4-2
The 6 cyl 3.1 is---- 1-2-3-4-5-6----- on the coil pack under the exhaust manifold is----- 1-4-6-3-2-5. If neither of these doesn't work, then you have a different engine.

Mar 12, 2009 | 1992 Chevrolet Lumina

3 Answers

What would cause 3 of the 6 plugs to misfire. 1998 buick century 3.1 . thanks


Check for trouble codes and check spark control module and coils

Mar 09, 2009 | 1998 Buick Century

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...