Question about 1999 Mercury Cougar

2 Answers

Blower motor removal in a 1999 mercury cougar

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What Will blow AC fuse When U turn on Ac Blower on

Posted on Jun 18, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

SECTION 412-02: Heating and Ventilation 1999 Cougar Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 02/8/2001 Blower Motor Removal

  1. Remove the footwell upper trim panel (passenger side).
    • Remove the pushpins.
    blower motor removal in a 1999 mercury cougar - m3401035.jpg
  1. Remove the blower motor.
    1. Disconnect the electrical connector.
    1. Lift the securing tab, turn the motor approximately 30 degrees counter-clockwise and remove the motor.
    m3401077.jpg
Installation
  1. NOTE: Engage the securing tab for the blower motor.

Posted on Nov 12, 2010

  • 1 more comment 
  • gerry bissi Nov 12, 2010




    #2 points to securing tab.

  • gerry bissi Nov 13, 2010

    It is just a big plastic panel that you can kick with your foot if you kick upward. Kind of a sound deademner, not painted, black I think.

  • Derrick Williams Jun 18, 2013

    Will A resister Blow Fuses

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the blower motor on a 1993 mercury cougar xr7 with a 3.8 motor


Typically you will find the blower motor on any vehicle in one of two places. Look on the passenger side fire wall. If it is not there then it is most likely one the inside under the glove box on the passenger side. Be aware that blower motors can be difficult to change depending on their location and what else must be removed to get to them.

Nov 24, 2014 | 1993 Mercury Cougar

1 Answer

Blower fuse on 99 mercury cougar continues to blow


Internal blower motor short, check this and ground connections.

Dec 14, 2011 | 1999 Mercury Cougar

1 Answer

How do i change a blower motor in a 1999 mercury cougar


Blower Motor Removal
  1. Remove the footwell upper trim panel (passenger side).
    • Remove the pushpins.
  1. Remove the blower motor.
    1. Disconnect the electrical connector.
    1. Lift the securing tab, turn the motor approximately 30 degrees counter-clockwise and remove the motor.

Jan 10, 2010 | 1999 Mercury Mountaineer

1 Answer

1999 Mercury Cougar 2.5L initially blower motor died, hazard lights stopped working, ran great, but now will not shift out of park.


this sounds like you should be keeping up with checking fuses with a test light on both sides of the fuse,the inter lock solenoid on the shift cable is not powering up,check your brake switch.

Dec 29, 2009 | 1999 Mercury Cougar

1 Answer

Blower motor fuse is located 99 mercury cougar


SECTION 412-04: Control Components 1999 Cougar Workshop Manual REMOVAL AND INSTALLATION Blower Motor Resistor Removal
  1. Remove the upper footwell trim panel (passenger side).
    • Remove the pushpins.
  1. Disconnect the blower motor resistor electrical connector.
  1. Remove the blower motor resistor.
-------------------------------------------------------------------------
f9d16f6.gif

May 06, 2009 | 1999 Mercury Cougar

2 Answers

Mercury Cougar heater blower only works on high.


remove the trim panel below the glove box and you will see the blower motor,just to the left of it you will see a 4 wire connector plugged into the case. This is the blower motor resistor,this is what you need to replace.

Feb 12, 2009 | 1999 Mercury Villager

1 Answer

99 cougar heater


I had this exact problem, it is probably your Blower Motor Resistor. It is located under/behind your glovebox, one screw holds it in. Not too expensive either. If that doesn't work it may be your blower motor. Good Luck!

Nov 20, 2008 | 1999 Mercury Cougar

1 Answer

1999 mercury cougar blower motor removal


Thanks alabama! Cant use my garage so Im in the the driveway, its cold (Jan. in Indiana) and I don't have alot of patience right now. Again thanks very much for sharing!

Jun 21, 2008 | 1999 Mercury Cougar

1 Answer

1999 mercury cougar bloswer motor removal


Yes there is a samll tab located on the bottom, if you bend it down and twist it should spin right out.

Jun 20, 2008 | 1999 Mercury Cougar

Not finding what you are looking for?
1999 Mercury Cougar Logo

965 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...