Question about 1992 Mitsubishi Galant

1 Answer

How to replace water pump in a 1992 mitsubishi galant

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and consider replacing the water pump at the same time.You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover, line up the TDC timing mark, Take off the front wheel ,take off the plastic splash cover, using an air wrench take off the lower pulleys, take off the lower engine cover, observe the timing marks/arrows and highlight with paint (on the crankshaft,counter balancer shaft , and cam shaft),take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually do it your self.

Posted on Nov 12, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: how do i replace the water pump for a 2001

This is a very complicated process, as you have to remove the timing belt. If you are not very mechanically inclined, and do this yourself you could cause complete engine failure as the engine timing is very critical. This is known as a "interference engine" meaning that the pistons WILL hit the cylinder valves, either bending them or punching holes in the pistons if the engine timing belt is not replaced in the exact position that it needs to be. You could opt to check out a repair manual to give yourself an idea of how complicated this is. They are available at any auto parts store for about $20.

Posted on Aug 30, 2009

  • 2 Answers

SOURCE: 2002 mitsubishi galant

Has it overheated lately?
My wife overheated our Galant and it just stopped working, it cranks but that's it.
I pulled the sparkplugs and found them wrapped in a gewey jelly like substance. Like an oil/antifreeze combo.
I am going to replace the entire motor for $1000 as taking it to the mechanics to theorize and practice may cost more.

Posted on Dec 14, 2008

  • 333 Answers

SOURCE: water pump chang on mitsubishi Galant 2.5 V6

Waterpump replacement requires removal and replacement of your timing belt. Because of this it is not your typical do it yourself repair. Engine timing is critical, and not having your belt set correctly can lead to catastrophic engine damage.

You can purchase a service manual at your local parts store to get an idea of what is involved, however this being an interference engine you should leave this job to a professional if you are uncertain enough about your abilities that you need to ask for help on it. The cost to replace the waterpump is far far less than the cost to repair a engine that had an incorrectly set timing belt.

Posted on Sep 10, 2009

  • 14036 Answers

SOURCE: oil pump 2001 mitsubishi galant 3.0l

oil pump is built in the front crank timing cover.

Posted on Jan 01, 2010

  • 50 Answers

SOURCE: 2001 Galant: I replaced the fuel pump on my mitsubishi galant 2...

check fuel pressure

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Mitsubishi Galant gsr 2000 Dohc replaced fuel pump ... won't start plenty of spark, getting fuel fuel to the rail but not into the pots....


It may not be getting enough pressure in the fuel rail could be a fault in the fuel pressure actuator or relay

Oct 10, 2016 | 1992 Mitsubishi Galant

1 Answer

How to replace the fuel pump on a 2009 mitsubishi galant


The Mitsubishi Galant has an electric fuel pump so you should ensure that its fuses and relays are working before checking it. You may need to clean your fuel pump or replace it if your gas tank is not empty, but your vehicle has difficulty getting fuel. The Mitsubishi Galant's variety of styles and trim levels can affect the replacement fuel pump you choose.
      1. Determine which fuel pump your Mitsubishi Galant will need. This depends not only on the make and model, but also the engine size. Models made from 1969 to 1973 will have a 1.3 L or 1.5 L engine, 1973 to 1975 models have a 1.6 L engine and models made from 1976 to 1983 may have a 1.6 L, 1.85 L, 2.0 L or 2.6 L engine.
      2. Look at later versions of the Mitsubishi Galant. Models made from 1983 to 1991 have 1.6 L, 1.8 L and 2.0 L engines. Models built from 1992 to 1998 may have 1.8 L, 2.0 L, 2.4 L and 2.5 L engines. Models for 1999 to 2003 add an option for a 3.0 L engine. The latest generation debuted in 2004 and may have a 2.4 L, 3.8 L or 3.8 L engine.
      3. Prepare your vehicle for service to the fuel pump. Relieve the fuel system pressure and disconnect the negative battery cable with a socket wrench. Take out the rear seat cushion. You will need to pull the seat stopper out and lift up the lower cushion. You can now remove the access cover.
      4. Unplug the fuel pump's electrical connection and disconnect the fuel send and return hose. Remove the retaining cap for the fuel pump with tool MB991480 and remove the fuel pump.
      5. Install the packing material on the fuel tank. Replace it if the packing material is damaged or deformed. Install the new fuel pump and align the marks on the floor pan and fuel pump.
      6. Complete the installation by reversing the removal procedure.
  • Nov 16, 2015 | 2009 Mitsubishi Galant

    1 Answer

    My 93 galant have low fuel presure at mornings so hard to start


    If the pressure is low then you have a leak down (fuel in the lines leaking back into the tank) Early signs of fuel pump failure. Put a pressure gauge on the fuel rail and make sure the pressure is in fact dropping before you spend money to replace the pump.

    Oct 13, 2012 | 1992 Mitsubishi Galant

    1 Answer

    My 2003 Mitsubishi galant is leaking water and it's coming from a pipe that is connecting to the water pump


    I have the same problem (01 Galant) replaced the water pump, radiator, thermostat housing, the hose, its the pipe under the car(near drivers seat) , going from the water pump to the thermo housing > What is that pipe called? anyone?

    Aug 29, 2012 | Mitsubishi Galant Cars & Trucks

    1 Answer

    I need to replace the water pump and put the car back to geather


    For water pump replacement i suggest you to check the help link provided below.

    click the link below :----

    Water pump replacing procedure for all vehicles?

    http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
    ---------

    HOW TO REPLACE A WATER PUMP

    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

    ------------------
    How to route Water Pump Belt for 1992 Oldsmobile ?

    http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

    ---------
    How to replace Water Pump on Car ?

    http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

    ---------
    How to Remove Water Pump?

    http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

    -------
    Where is Water Pump located ?

    http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

    -----------

    This will help. Thanks.

    Jan 21, 2012 | 1996 Mitsubishi Galant

    1 Answer

    What is the cost of replacing a water pump on a 1992 mitsubishi galant gsr?


    Labor and part? It would probably be close or around 500. The water pump is on the timing belt. That is a pretty good little job. It might cost more then that.

    Mar 03, 2011 | 1992 Mitsubishi Galant

    1 Answer

    Hi I am replacing the timing belt, water pump


    I hope this is the one.

    http://www.2carpros.com/forum/1995-mitsubishi-galant--timing-belt-vt374817.html

    Mar 14, 2010 | 1994 Mitsubishi Galant

    1 Answer

    Replaced water pump


    your water pump is driven off of your timing belt.
    re time cam to crank

    hope2help shack

    Apr 18, 2009 | 1995 Mitsubishi Galant

    2 Answers

    Mitsubishi Galant 1992


    1992 Mitsubishi Galant
    2.0 liter DOHC L492789848.gif

    Aug 18, 2008 | 1992 Mitsubishi Galant

    1 Answer

    Mitsubishi Galant


    It could be head gasket, the water could be leaking into the cylinder/s. Is there excessive steam coming out of the exhaust?

    May 17, 2008 | 1992 Mitsubishi Galant

    Not finding what you are looking for?
    1992 Mitsubishi Galant Logo

    788 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7697 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...